http://www.fixya.com/support/vantecSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 25 Jul 2008 04:01:33 GMT80http://www.fixya.com/support/t133114-nexstar_3_external_driveI am getting the error when I try to open- E:\ is not accessible Incorrect Function. I have tried two different firewire usb, checked the serial bus controllers and windows says its working. Ieven went throught the trouble shooter and can't...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t445591-vantec_1_nexstar_2I have the said external HDD. It worked perfectly but now does not. It seems I have lost the drivers. I can not find my instal disk. I run Windows XP. I need to re-instal the drivers. Where can I access them from please. MelFri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t142769-cannot_open_hard_driveProduct NexStar 3: Innitialy I openned the 3.5 Maxtor IDE 18.6 Gigabytes with no problem, I have made a special file to copy information from my Dell 2650, I have copied about 200 Mb with no problem but suddenly stopped giving a message, that a file...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t172157-question_about_athlon_1_2I,ve got a Athlon 1.2ghz cpu and a ECS K7S5A mother board. After installing the board and the cpu I can only get it to run stable at 900.There doesnt seem to be a lot of adjustments on the board itself and there is a "CPU PnP" setting in the...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t166576-esata_not_supported_vista_home_premiumI have a Vantec eSATA external enclosure, however I am only able to enable it through the USB connection, does anyone have a solution as to how to get Vista Home Premuim 64 Bit to function via the eSATA method? Any help would be greatly...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t165196-p4t533_samsung_memory_problemI have installed 2 512 MB/16 ECC Samsung MR18R162GDF0-CT9 1032-32P memory parts on my motherboard in a just built computer. It won't boot up. I get the "can't locate DRAM 4 second beeps going. I have tried using one or the other along with the...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t165090-pc_use_in_space_restricted_hot_areaHi, I need to replace a pc in a shop - it sits in a confined area and the shop does get hot (no a/c). 2 pc's I've built so far have died due to the heat (I think) and the current one is now very temperamental (crashes when devices plugged...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t142541-firewire_usb_2_0_both_dont_workHey, my problem is that when i plug in my device with the USB 2.0 it tells me it detects a USB Mass Storage device but then the external HDD won't even show up on "My Computer" for use. When i use the fire wire it detects it as a IEEE 1394 device and...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t111690-esata_msi_k8n_neo4_platinum_vantec_nstHi All, I just bought 2 Vantec NST-360SU-BK esata hd enclosures. The enclosure comes with a header bracket that adds an esata port to the back of your computer. Internally it just plugs directly into a motherboard sata connector. Externally...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t111687-amd_athlon_2600_asustek_a7v8x_mxI have a Asus A7V8X-MX with AMD Athlon 2600+ and 512MB RAM.The system shuts down after a couple of hours(some times 1hr,6hrs).I have tried all the DIP switchs settings for setting the external CPU frequency.The system has 2 fans for...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t111686-very_high_temperatureHi i have just replaced my old epox 8kta3+ mb with a epox 8k3a+. and i have a TB xp 1800+ processor with an thermalright sk6 heatsink and a 60 mm 19 db pabst cooler + iam using artic silver 2 thermal compund (and i followed the instrucions...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83970-msi_compatibility_vantec_cpu_fansI am wondering if anyone has had any problems with Vantec VA4-C7040 CPU fan not registering its RPM ratings on MSI Motherboards? Current System: AMD AthlonXP 2000+ MSI KT3-Ultra2 6380e Motherboard 1 Gig Ram ASUS 8420 GeForce4 Ti...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83905-problem_mounting_80mm_fan_adapterHi, I'm trying to replace the heatsink fan on my Alpha heatsink with an 80mm fan and an adapter. ?The problem is that the original screws from the Alpha are too long because they are longer by the thickness of the original 40mm fan (I...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83792-vantec_nexus_nxp_101got one of these and it is totally bust, cant return because i lost some stuff from the box and threw away the original packaging in over confidence it would work first time when i plug a usb cable into the front.. i get sparks, literally...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83699-free_kt7_chipset_fanI have a new KT7A-RAID board, after reading about some people having problems with noisy chipset fans, I replaced mine with a Vantec ball bearing fan, just in case ?Anyone who wants the fan can have it for the price of postage. Also,...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83535-vantec_va4_c7040_fan_oscillating_createsI bought this very efficient cooler after a review I read on tom's. However the fan mounted on top of the CPU makes a noticeable vibration. When it speeds up to it's some 4000 rpms it starts to shake back and forth, oscillate I think, and it...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83517-pc_noisy_cooling_fanHi, I have a Althon 1700+ motherboard running over magic pro motherboard. I found the CPU cooling fan is quite noisy. Actually, all my past DIY PC like this (no matter using Pentium or Pentium II) suffer from this problem. Some of my...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83488-radeon_9800_pro_responsible_system_tempI just replaced my 9600 Pro with a 9800 Pro and my system temps seem to have gone up 4-5 degrees. ?Query: is this because a.) the 9800 puts out more heat so the temps rise, b.) when I put the card in I jumbled up the cables inside the case...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83095-vantec_nxp_201_sl_fan_controlerIs my Vantec NXP-201-SL fan controler defective ? When i connect my fans and run them at 7volt the control makes clicking sound, no matter what fan is connected ? This is pathetic whats the point of running them at 7volts to get the ...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t165028-vantec_fanI just bought a CCK-6035D for my T'bird 1.4GHz. Do I need to apply the 'Flowstar Co. Ltd - Silicone Heat Paste' that came with it? If so what's the best way? Do I run the fan directly off the MoBo, or use the 12v Molex? All the reviews I've...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83163-4_red_lights_kt7_turbo_help_me_confirmMy HSF draws too much current and is now connected to the PS. ?The board does not appear to have any problem operating this way. ?However, if the header is burned out the symtoms may be different.Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83168-heat_sink_fanWhat is the best hsf for a 1.33 ghz tbird?Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t141842-computer_not_recognizingI installed a Hd into the nextstar and double checked it...it seems to running fine but my laptop will not recognize the new drive. what do I need to do? I run a PC with windows Xp on it. I have a feeling I am supposed to do something...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t143763-accessingI hooked up a toshiba hdd2188 to a nexstar-3 enclosure. The light blinks as soon as I plug the usb cable in and then it stays on steady. But my computer will not even recongnize something has been plugged in. It was a laptop hard drive before. Could...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83283-vantec_ez_swap_not_compatible_seagateThe Vantec EZ-Swap may be incompatible with Seagate Barracude 200 GB drives. This is a problem for people who back up networks using cartridge systems and cheap IDE drives. See my blog for more details: ...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t1968-vantec_aeroflow_problem_2500Just built a new system : 2500+ A7n8x Deluxe 1gig xms3200 matched pairs etc .. using the aeroflow the cpu temps are @ 67C / 1100MHz a tad high.. i did put a thermal pad on there instead of using the grease .. which i ...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83468-cpu_tempCan someone tell me what is the acceptable temp for the CPU? I have a Soyo Dragon Mobo and AMD 1.333 Mhz . My current temp is 49 celciusFri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83477-normal_cpu_temp_athlon_xp_2100just got my new motherobard/cpu, and wondering what the normal temp for one of these is. ?right now its around 55C, just idling in the bios for 20 mins or so with the retail HSF anyone know a good page for information of stuff like that?...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t165174-second_case_fan_didnt_help_heatI put another case fan in the front of the box today. It is exhausting (airflow, not the work). The original case fan I installed is directly behind the CPU and is turned to intake. What am I doing wrong? Case temp 32c, CPU temp...Fri, 25 Jul 2008 04:01:33 GMThttp://www.fixya.com/support/t83491-helpMy radeon 9600 pro's gpu fan died recently so i went to frys and picked up a Vantec Iceberq, got home, CAREFULLY removed stock fan, few tiny flakes of old cooling pad was on the gpu, i didnt want to risk scratching it so i left it alone, put...Fri, 25 Jul 2008 04:01:33 GMT