http://www.fixya.com/support/u_s_roboticsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 08 Sep 2008 09:50:03 GMT80http://www.fixya.com/support/t79406-usr_5686_03_v_92_flash_problemWell, I decided to flash my new USR 5686-03 external with the new v.92 firmware. ?I had previously been able to connect at 44,000 to 48,000 consistantly, however since the flash, I can now only connect at 41,333. If anyone has any...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t941200-driver_roboticsi need the driver or the 3com u.s robotics 56k message modemeMon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t828883-router_gets_disconnectedhi, i have router and my computer is connected through it by cable. sometimes when i switch it off for some time and again switch it on then my internet dosent works and some times my router gets disconnected only from internet the LAN connection...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t795087-router_gets_disconnectedhi my problem is, when i switch off my router and then again switch it on after some time it takes time to connect to the net or some times it automatically gets disconnected from netMon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t237523-vpn_pass_problem_robotics_model_5461when my work laptop is connected directly to my home DSL Modem, I can connect to my employer's network using Cisco VPN Client. When the laptop is linked to my home USR5461 either wireless or wired, I can connect to internet but cannot connect to...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t196679-canon_pixma_ip4000_problemHello. I have this Print Server connected to a Canon PIXMA iP4000 printer, and afer configuring the printer in the computers as it is said in the manual, I try to print some documents, and the printer do not print anything in some of them, and the...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t191393-mecer_laptopmy cd drive has an exclamation mark over it,how do i make it visible again? i uninstalled it and re-installed it, but is still not visible.Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t186858-icmp_type_3_code_4_errorsProblems communicating through the router. Lots of ICMP type 3 code 4 errors in the log. Accessing a web site will be mostly ok but then a click will cause an infinite "waiting for ..."Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t174798-wireless_bridge_modded_xbox_ftp_issuesI have a modded XBox connected to my network via a DLink GWL-810 bridge. XBox live works fine. But... I can't FTP to my XBox. I have set a static IP address on the XBox but my computers don't see the XBox on the LAN. When I connect the same ...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t173761-modem_inf_file_authoring_helpPost for FREE via your newsreader at post.usenet.com I would like to write or modify the Windows 98 INF file to support higher serial interface speeds for Microcom's modems. And also to support some additional models. I am very familiar with...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t173760-usr_5450_cable_modemI am a bit confused reading the USR site. Can I use a USR 5450 with my cable modem, or must I have a router instead? I am looking at the 5450 instead of the 8054 because my 8022 has had such problem dropping network connections and I thought...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t150829-unable_open_internet_pageHI i use wireless adapter US robotics MAXg,and seems that i connected to modem.The ikon shows status connected,signal strenth exelent,before it was showing aquiring ip adress(if you use automatic update ip adress in internet protocol)i set in...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t79499-robotics_56k_v_90_winfax_pro_softwareConfiguration Information: ? ? ? ? Operating system: --Other-- ------------------------------?------------------------------ Pager problems - Winfax pro pager status window freezes on the screen indicating operation cancelled with no...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t79461-support_usrobitics_modems_under_mgettyDon't set the flag. I believe it was for old modems and an old mgetty. Before Debian, I used to compile mgetty 0.22 (or so) without it, and mgetty was always fine with my USR Courier. ...RickM... -- TO UNSUBSCRIBE FROM THIS MAILING...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t79287-new_modem_problemHave: XP Pro 256 MB memory-1.3 gh CPU OE 6 New modem: US Robotics 56 K External Mod USR5633A USB Old Modem: US Robotics 56 K external Sportster Serial connect ? ? Old ?modem gave out so got a new one then the problems...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t79283-usr5699b_modemModem will not connect unless I uninstall it and reinstall it and reboot. ?Any suggestions? ?Have had phone company here twice and they say it is not the phone line.Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t33522-dhcp_will_not_resolveI have a wireless home network with 3 computers. All of them are set to automatically obtain an ip address. 2 of the computers work fine but one will not receive the ip address from the router. I can configure the ip address manually and can...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t33369-robotics_wireless_turbo_router_usr8054? ?Started having problems with this router Saturday night 1/10. ?Kept losing the connection. Sunday couldn't connect at all. ?Got pissed and unplugged the power cord and went back to my laptop and found I was still on the Internet. ?Magic....Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t131785-stuck_in_10_mbps_modesomehow my unit is stuck 10 mpbs mode. i have it connected to a wireless router. I tried connecting to the modem with the same result. HELPMon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t117867-error_code_10_device_cannot_restartI try to install my usr5417 at 2 computers, but I always got the same problem... Firstly, I put install cd and begin installing ... I did what it says ... (First, install .. then shutdown ... place card ... power on computer) After windows...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t167071-need_help_information_about_winmodemshello everybody, i have a "U.S Robotic 56k fax int pnp" modem, i have recently installed "red hat", the problem is (and i'm sure many of you know it) i can't surf the web in linux, 'cause my modem is apperently a winmodem. all the articles i...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t112333-usr5610b_pci_modem_problemI bought this new modem with my new computer because my new motherboard did not have any ISA slots. I have always used ISA modems before and have never had any real problem installing them in linux. This modem is detected, but it comes up with...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t112334-usr_ext_usb_installation_woesI've received an autoreply from USR's support-bot but who knows how long an answer will take, and calling Utah is the last resort. Type: USR External USB Modem (WinXP-Pro SP1) Model: USR265633A Problem: Win autodetects the USB modem...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t112335-robotics_sportster_28_8_v_34_problemAfter my US Robotics Sportster 28.8 v.34 modem connected with a Zoom 28.8 v.34 modem, it get disconnected after about 5 to 10 minutes of connection time. The supervisor date on the chip show 9/02/94 when I typed ati7 at the modem command line....Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t112336-u_s_robotics_56k_problem_win2k_prohi all, I have a problem with my modem U.S Robotics 56K winvoice which is after 10 min of connecting to the internet my modem halts and i can't send or recieve any thing.After that i want to disconnect it but won't and i can't restart the...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t112339-robotics_56k_winmodem_problemI recently purchased a USR 56k Winmodem and installed it under Win 3.1 using COM2 IRQ3. The modem worked fine under Win 3.1, but when I upgraded my OS to Win 95 I began having problems. When the computer tries to communicate with my modem it...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t171998-vistas_hardware_compatibility_dial_upI have a dial up modem and I can't find any drivers for the 64 bit version of Windows Vista or XP that work with it. Is it possible to have a 64 bit system and use dial up? I have no other option at this time.Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t167047-decisions_decisionsive decided to give linux a go. so i went to download mandriva and straight away ive hit my first problem, there's 2 versions kde and gnome. the problem is which one? ive never tried linux before so i need a version that's easy to configure ...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t167168-modems_next_turbo_colorHi there. I currently own a NeXT Color Turbo slab and I am looking at buying a modem for it. But, I don't just want an external modem that will only run on the NeXT. I would like to be able to use this modem on a PC (that I will probably...Mon, 08 Sep 2008 09:50:03 GMThttp://www.fixya.com/support/t174930-hayes_smartmodems_openvms_issueI have a VAX that I need to hook a couple of "Hayes-compatible" modems to, in order to allow users to dial-in and do stuff. I have searched around the 1992 DECUS archives and I found this great article written by David Deley about the exact...Mon, 08 Sep 2008 09:50:03 GMT