http://www.fixya.com/support/toshiba/multimedia_projectorsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 26 Jul 2008 17:33:50 GMT80http://www.fixya.com/support/t251365-flickering_projectionHi, I have got this flickering image comes out when the projector is connected to the PC. I have tried changing pc and cables. The problem still occurs. But when the projection is shown via the projector itself without connecting to the pc, the...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t612817-focusingHello!!!!! We are having a problems focusing the toshiba projector . The covering around the lens is loose. While viewing information from projector to the screen ,the information is blurry and can be adjusted for proper viewing .It is a Toshiba...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t220708-reset_lamp_hours_timerHow do I reset the lamp hours timer for this projector? The projector manual says to read the instructions that come with the lamp. The lamp manual says to read the instructions that come with the projector!Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t458027-tdp_sw80_low_lightprojector light is low. Bulb is only used 200 hrs out os 2000 lifeSat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t126703-white_lines_across_screenMy proyector (TDP-T9U) shows two white lines at the left across the screen all the time, How can I fix this, I have 2 months with it so I do not thing it is the lamp.Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t486954-toshiba_tdp_s1_projector_partsWhere can you find parts for this thing? It's not even listed in Toshiba's data.Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t482021-projector_lampWe purchased this projector brand new approx 3 years ago. Each year for the last two years we have had to replace the lamp. Each time we had to replace the lamp it was not anywhere near the life time that the lamp should have been replaced. This is...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t469716-toshiba_tdp_t_91aI have 3 out of 30 projectors TDP T 91A that very quickly switch to overheating and shut down. These machines started this about the same time. Wouldn't you know a few days out of wannenty. The cost of repair is 800. Part 23587743 PCB Assy main is...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t428527-projector_will_not_powerI HAVE AND BUY A FEW PROJECTORS WHAT ARE THE MOST COMMON CAUSES FOR THE PROJECTOR NOT POWERING UPSat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t375101-colour_mismatchingI have one toshiba projector,model t90.when the system connected to the pc,all colours are coming.but colours are mismatching.i think controller cord is problrm. whakt is the problemsSat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t356852-sharper_imaageMy TOSHIBA TDP-S26 DPL Projector is not putting out what I think is it's sharpest images. Especially the numeric and alpha characters. I've tried the sharpness adjustments. Not getting what I want. I am projecting out about 7 feet to a 75" diagonal...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t292943-toshiba_tdp_d2_projectorA shadow appears on the screen image, covering about a third of the screen image. ?Replacing the lamp has not changed anything.Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t260985-black_line_in_pictureRegardless of signal source [even when the - there's a dark gray line about 1/3 from the bottom of the picture.Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t207293-lampWhen turned on, lamp comes on dim as usual. What is different now is that after about 30 seconds, the lamp indicator light flashes three times and the turns off and the power/standby light goes to red. At the same time the lamp shuts down without...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t179480-projector_lamps_toshiba_tdp_mt8_dlpMy first lamp failed after 900 hours, I purchased a second lamp part number TLPL-MT8 from partstore.com. The fan failed after around 250 hours. Can the fan be fixed? Do I need to buy a new lamp? Can I expect a free replacement? The lamp was...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t143739-connecting_notebook_projectorI connected the Pc cable provided to the projector and notebook. At startup I can see the Windows XP logon on the tripod screen, but after that the screen goes blank (blue). Could you please advise.Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t137088-blub_goes_out_during_usePower is correctly hooked up with standby light lit. When turned on the normal startup with the Toshiba ET1 logo and then to the input. Both the bulb and lcds are working fine but about 3-5 seconds after the inputs are up on the screen the buld goes...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t134693-black_bar_bottom_image_when_turnheay guys just got this projector form someone who told me that the main pwb board is broken, as a result i am getting a black bar under the screen of the projector, anyone knows where i can get this repaired? i got it free so dont mind spending...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t134914-blinking_red_lamp_lightWhat does the Blinking red lamp light mean? Also, the projector is loud. The manual said on rare occasions the color wheel spins at a high rate of speed causing a metal scraping sound. Is there any way to fix this?Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t149742-need_solution1.thoshiba tlp t50 fault; it is not working. only start and after few miniuts going to off condition. symptoms; when i switch on display&light ok the input status also comming in few seconds red colour fan symbol is comming at top(right...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t102705-camera_problem_toshiba_tlp_261When the projector input is set to the camera, there is no clear image. The light works. The camera will not focus at all. I can place my hand under the camera and you can notice movement when moving it back and forth, but you can not distinguish...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t23330-projector_bulb_replacementIf I get a dlp or lcd projector should I plan on paying $400 or $500 every few months for a replacement bulb? ?Most projectors list the lamp life as 1500 to 2000 hours. ?Anybody have any experience with how long a bulb lasts? I would like...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t155493-trying_figure_out_problemMy issue with the projector is when i plug it in, only the intake fan in the Back comes on, no indicator lights or anything else comes onSat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t23388-toshiba_repair_problemsHey group, Anyone here have problems with toshiba getting warranty reapir done in a REASONABLE amount of time? I purchased my 2545cds about 3.5 months ago, I blew the main board over the weekend and rushed it to a local warranty...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t117325-got_light_but_nothing_elseWhen I switch on the projector and connect it up to the laptop, the bulb comes on and gives me a short display of changing colours but nothing else. I don't get a menu or input from the laptop. The connecting leads seem ok.Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t23554-tlp250_251_in_high_frequency_inverterI'm exploring the Toshiba TLP250/251 for drivibg the IGBT power block in a brushless motor design. Has anybody any useful experience of this part ? Does the lacj of control over the rise and fall transients cause and switching loss ...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t23582-infrared_problem_g3_pcMy partner has a Toshiba portable and I have a G3 Powerbook. Both have infrared capabilities. But I can't get them to comunicate. ?The Mac sees the Toshiba but then immediately gives me a message that the connection has been lost ?and will...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t12114-ot_laptop_problemI've been handed a Toshiba laptop that has problems when starting up. ?It runs Windows 95 (yes, it is quite old). ? On turning the machine on it begins the start-up routine, gets as far as the C:\WINDOWS\COMMAND\keyboard.sy?s, displays...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t12122-help_toshiba_t2130cs_520_displayA friend of mine has an out of warranty Toshiba Satellite T2130CS/520 that the built-in display stopped working on a few days ago. The machine is working fine through an external monitor, but the built-in display is just black. When I...Sat, 26 Jul 2008 17:33:50 GMThttp://www.fixya.com/support/t250769-faulty_projectorI switched my projector on and it made one beep, it then shortly after made two more beeps and would not light up with an image. Any ideas on whats wrong??Sat, 26 Jul 2008 17:33:50 GMT