Question about Car Amplifiers

1 Answer

Audiobahn 2300 hct schematic

HELP

Posted by on

  • awalracing Sep 04, 2008

    schematics, some how to get a hold of audiobahn? It stays with the red LED light on, then it goes blue for a second, when it goes blue it goes thump thump. no wires hooked up, just power, ground and remote.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Help with what? Finding the schematic? Interpreting it? Troubleshooting?

Posted on Sep 03, 2008

1 Suggested Answer

  • 155 Answers

SOURCE: A2300HCT Car Audio Amplifier: i have a audiobahn a 2300 hct amp and it has stopp...

Well, sounds like you have an internal damage since it smokes, if it smokes as soon as it kicks on, and blowing the fuse right away, I would have it fixed. But my guess would be something with the ground that is making this happen, or some how your power is grounding on the amp. When ever smoke comes into play, thats never good any way at this point you gotta admitt that thiers internal damage.. blowing fuses can also be cause by over working your amp. along with the sub load at 1 ohm make sure your amp can do the same.. hope this was helpful in some way

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A2300HCT Car Audio Amplifier: i have a audiobahn a 2300 hct amp and it has stopp...


Well, sounds like you have an internal damage since it smokes, if it smokes as soon as it kicks on, and blowing the fuse right away, I would have it fixed. But my guess would be something with the ground that is making this happen, or some how your power is grounding on the amp. When ever smoke comes into play, thats never good any way at this point you gotta admitt that thiers internal damage.. blowing fuses can also be cause by over working your amp. along with the sub load at 1 ohm make sure your amp can do the same.. hope this was helpful in some way

May 16, 2010 | AudioBahn A2300HCT Car Audio Amplifier

1 Answer

Audiobahn a8002t schematic


audiobahn.com under tech support you can download your manual for almost any thing even shows you wiring diagrams helped me out...

Mar 01, 2010 | AudioBahn A8002T Car Audio Amplifier

1 Answer

I need a diagram for my A8002T Amp anyone have one?


check out audiobahn.com thier is a free wiring diagram under tech support

Mar 22, 2009 | AudioBahn A8002V Car Audio Amplifier

1 Answer

AudioBahn A2300HCT no sound


Generally, if the amplifier smokes, the power supply FETs have failed.

Many times, the output transistors fail and that causes the power supply FETs to fail.

Audiobahn won't release schematics. The amplifiers are relatively simple and a schematic isn't generally required.

If you know how to check the transistors, check them to determine the severity of the damage. If you don't know how to check them, read through the following page following all links provided.

Basic Amplifier Repair

Let me know if you have any other questions.

Sep 04, 2008 | AudioBahn A2300HCT Car Audio Amplifier

1 Answer

AudioBahn A2301Q Car Audio Amp


For the most common problems, a schematic diagram isn't required. What does the amp do when you power it up?

If you're new to repair work, read through the following page. It will guide you through the most common types of repairs.

Basic Repair Primer

Let me know if you have any other questions.

Jun 14, 2008 | AudioBahn A2301Q Car Audio Amplifier

2 Answers

Protect light stays on


It's likely that the output transistors have failed. If you measure the resistance between the second and third legs of the large transistors adjacent to the large (green?) resistors, you'll find several that read ~0 ohms. Its likely that only one of several that read 0 ohms is defective but all that read 0 ohms in the board are operating in parallel and must be replaced together so they match (electrically).

Disconnect the amp from the power source BEFORE trying to measure the resistance across the resistors.

Nov 25, 2007 | AudioBahn A2300HCT Car Audio Amplifier

2 Answers

Audiobahn A2300-HCT


bring it to a hifi or tv repairstore

Nov 04, 2006 | AudioBahn A2300HCT Car Audio Amplifier

Not finding what you are looking for?
Car Amplifiers Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Amplifiers Experts

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Amplifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...