Question about Wireless Access Points

1 Answer

Emule i can't conect to aserver wat shod i do?

Posted by on

1 Answer

Idk

Posted on Sep 26, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable save setting dap-1360 (this feature has been disabled on this emulator)


This is the manual for this wireless access point from dlink.

http://www.dlink.com.br/sites/default/files/product_download/DAP-1360_A1_Manual_v1.00.pdf

The error message should not mention emulators, return it to where you bought it, as it sounds as if the firmware version is not correct.

Sep 03, 2014 | D-Link Wireless N Access Point Dap-1360 -...

1 Answer

How can configure the dlink dap 1360


VISIT the dlink website,you can get assistance with your query
http://support.dlink.com/emulators/wbr2310/lan.htm

Apr 23, 2014 | D-Link DAP-1360 Wireless N Range Extender

1 Answer

Radio lg kf510


visit dlink website, they have lots of advice. you can google the URLyou want

http://support.dlink.com/emulators/wbr2310/lan.htm

Apr 21, 2014 | D-Link Wireless Access Points

1 Answer

How to connect tp link router (Model- TL-SF1005D Ver-10.1) with ptcl wifi modem


try dlink.com or just google the URL

http://support.dlink.com/emulators/wbr2310/lan.htm

Apr 09, 2014 | D-Link Wireless Access Points

1 Answer

Router DI-624


You should not require any drivers to be able to connect to this router.

If you want to configure the router you can simply connect to the router using a cable and if it is factory default you should be able to access it using your browser http://192.168.0.1

You can find the emulator at http://support.dlink.com/emulators/di624/h_wizard.html

Sep 02, 2012 | D-Link Wireless Access Points

1 Answer

How to reset to factory default a Cisco Aironet 340 (AIR-BRI342)


  1. Use a straight-through cable with 9-pin male to 9-pin female connectors to connect the COM 1 or COM 2 port on your computer to the RS232 port on the bridge or AP. You can select the Reset option only through the console port.
  2. Open a terminal-emulation program on your computer.
    Note: These instructions describe HyperTeminal; other programs are similar.
  3. In the Connection Description window, enter a name and select an icon for the connection and click OK.
  4. In the Connect To window, select the port to which the cable is connected and click OK.
    1. In the Port Settings window, enter the following settings:
    2. 9600 baud
    • 8 data bits
    • No parity
    • 1 stop bit, and
    • Xon/Xoff flow control
    1. Click OK and press Enter.
    2. When the Main Menu screen appears, reboot the bridge or AP by turning the unit off and then turning it back on.
    3. When the bridge or AP reboots and the Main Menu screen reappears, typ
    4. Use a straight-through cable with 9-pin male to 9-pin female connectors to connect the COM 1 or COM 2 port on your computer to the RS232 port on the bridge or AP. You can select the Reset option only through the console port.
    5. Open a terminal-emulation program on your computer.
      Note: These instructions describe HyperTeminal; other programs are similar.
    6. In the Connection Description window, enter a name and select an icon for the connection and click OK.
    7. In the Connect To window, select the port to which the cable is connected and click OK.
    8. In the Port Settings window, enter the following settings:
      • 9600 baud
      • 8 data bits
      • No parity
      • 1 stop bit, and
      • Xon/Xoff flow control
    9. Click OK and press Enter.
    10. When the Main Menu screen appears, reboot the bridge or AP by turning the unit off and then turning it back on.
    11. When the bridge or AP reboots and the Main Menu screen reappears, type 2 to select Reset and press Enter.
    12. Type yes and press Enter to confirm the command.
      Note: The Reset command is valid for only two minutes immediately after the bridge or AP reboots. If you do not enter and confirm the Reset command during that two minutes, reboot the bridge or AP again.
    13. After the bridge or AP reboots, reconfigure it by using the terminal emulator or an Internet browser.e 2 to select Reset and press Enter.
    14. Type yes and press Enter to confirm the command.
      Note: The Reset command is valid for only two minutes immediately after the bridge or AP reboots. If you do not enter and confirm the Reset command during that two minutes, reboot the bridge or AP again.
    15. After the bridge or AP reboots, reconfigure it by using the terminal emulator or an Internet browser.

    Apr 17, 2009 | Aironet BR500

    1 Answer

    Can't ping to tp-link wireless


    do one thing put the access point in the universal repeater mode and the put the same ip address of the LAN same means same series for example you using the 192.168.1.x you put the same series ip address. all the same setting of the router or modem wireless or wired all setting shod be same settings

    Apr 09, 2009 | Wireless Access Points

    1 Answer

    Wireless conect


    see that is firewall is on or proxey server are thery so pls remove it after then you try.

    after then you not get it then re-configure your usb adapter

    Jun 26, 2008 | Wireless Access Points

    Not finding what you are looking for?
    Wireless Access Points Logo

    Related Topics:

    61 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Wireless Access Points Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18299 Answers

    noti13

    Level 1 Expert

    15 Answers

    Mike

    Level 3 Expert

    4331 Answers

    Are you a Wireless Access Point Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...