I just don't understand what Sony said about the memo-stick...
If I want to use a momo-stick with the FD95, what will I need (except the momory)? is it just a momory reader which connects to my PC, or also something to put in the camera to let the camera able to accept the memory stick?
Kind regards and thanks in advance,
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I also have gotten this problem.
I have found that while using the Mediastick adaptor, I get this error when the adaptor's batteries get low. The adapter needs enough power to write to the memory stick, otherwise it writes too slow with low power, thus resulting in the disk error. Hope that helps you.
MOMO's are notorious for the potentiometers going bad. There used to be a place that sold replacements, check www.digikey.com I think the top kit is for momo black, and the bottom one for momo red. I think they were zero balance when I checked.
963260-KIT-ND Q1465369 MOMO FORCE REPAIR KIT
963282-KIT-ND Q1465379 MOMO RAC FORCE FDBK WHL RPR KIT
as a last resort, take the information for the digikey potiometers to Radioshack and see if they can order you some.
Basically you bought the wrong camera for your needs. The 95 can not do well under the conditions you describe. The ISO is fixed and to low for the amount of light you have available. The viewfinder begins to darken after the lens is wide open and the shutter speed is increased further. There are three possible cures. More light, not possible in your situation, faster lens or higher ISO, again not possible with your camera. Maybe you could convince them to play in the dayight. :)
A Cxxxx error normally can be fixed by the user. I suggest you remove the battery pack AND the button cell (I suppose the FD95 has one) and leave it without both for at least half an hour. I would think that after that, it should be ok except that you'll have to set the clock and some other preferences again.
Hope this helps.
My flash went out twice on my FD-95. The first time it was fixed under warranty and it was the bulb. This time I haven't fixed since I have my 707 now. It still works with the external flash like yours did before you dropped it.
If possible I would try and buy another external flash since your time is short. When I had my camera fixed under warranty it was just about to run out and they, the camera shop, told me I should get it fixed now instead of out of warranty because the cost could be hundreds just in labor alone.