- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The xD-Picture Card (xD stands for "extreme digital.") is a flash memory card format developed and introduced to the market in July 2002 by Olympus and Fujifilm, and manufactured by the Toshiba Corporation. xD cards are in Olympus and Fujifilm digital cameras, and are available in a range of sizes, from 16 MB to 2 GB currently. A higher-performance xD card known as Type M came out in 2005, and uses Multi Level Cell (MLC) architecture.
An xD card is 20mm x 25mm x 1.78mm and weighs about 2.8 g, making it significantly smaller than the nearly matchbook-sized CF card and about half the size of the SD/MMC card. As far as size goes, it is much closer to miniSD or RS-MMC. The manufacturer listed write speeds for xD-Picture Cards are: for the 16 MB and 32 MB card, 1.3 MB/s and for the 64MB and higher cards, 3 MB/s. Both offer a minimum read speed of 5 MB/s. The xD Type M cards have a faster standard rate of 4.0MB/s for reading and 2.5MB/s for writing.
Anything up to 2gb will work with your camera, either the type M or the type M+ will be fine.
The xD-Picture Card contact area is soiled
The xD-Picture Card is damaged
The xD-Picture Card format is incorrect
The manual offers the following under Remedy:
Wipe the contact area on the xD-Picture Card with a soft dry cloth. It may be
necessary to format the xD-Picture card
If the error message is still displayed. replace the xD-Picture Card.
Contact your Fujifilm dealer.
Be sure you have formatted the card, not the internal memory (if the camera has that). Be sure your battery is fully charged, so that the device can fuly write the file. Be sure you are writing the file to the card, and not the internal memory, as there may not be enough space on it to write the file. If this does not resolve the problem, let me know.