Question about Pioneer Televison & Video

Open Question

We have a pioneer pdp501mx 50" plasma tv when you turn it on it continually flashes red/green on the ld and there is no picture. Can you tell us what we need to fix it and whether it is and approximate cost

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: pioneer plasma no picture with blinking red light

this requires a replacement of the power supply board. This is per Pioneer tech support whom resolved my issue when I called. Hope this helps!

Posted on Jul 10, 2008

  • 84 Answers

SOURCE: Pioneer Elite Plasma TV

This a factory issue and usually requires service. Most cases it is a bad power supply caused by a surge or powering off and on too fast ... sorry I wish I had better news

Posted on Sep 20, 2008

  • 80 Answers

SOURCE: i have a pioneer 50

part #AWU1316 Pdp Service Panel it is listed as no longer avaible because they do not sell the pdp to the public or non service centers
sorry
scott

Posted on Nov 05, 2008

phongnv
  • 56 Answers

SOURCE: samsung big screen tv model pcl542r has a green or red tint to picture

This is for the 50" Vizio TV,

It sound like the control board has a problem. There is two way to fix this.

- Upgrade the firmware of the control board, If you can find the firmware upgrade device.
- Replace the control board (I think this the best solution)

Posted on Feb 16, 2009

  • 33 Answers

SOURCE: Plasma TV Does Not Turn On - continous Red Flashing Light

Had a similar problem with my Sony. Unplug for 36 hours and try again.

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pioneer pdp-r05XE, on the plasma, the light flashes green and red alternately whilst on the receiver it flashes green 6 times. I can't get the tv to turn on...


Unplug if you have not done so BOTH units from power for several minutes (any cable or satellite box also connected.

wait several minutes and restore power to all units which may allow them to reboot.

Cannot hurt and may help.

Dec 06, 2012 | Televison & Video

1 Answer

Pioneer Elite. Loud popping sound and picture disappeared


Power supply board is dead.The board where the power a/c cord plug into it.Replace the power supply board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

May 30, 2010 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Plasma tv stopped working


hi i have a pioneer plasma tv pdpro4e all it doses is flash green red green red and on the mediar reciver as well tv dont come on help please

Dec 31, 2009 | Televison & Video

1 Answer

Philips 50pf9631d/37 no picture sound. Red light flashing


hey crs246, I have the same exact problem with my philips tv same model. Have you gotten any help that you can share with me. Any help would be appreciated.

Dec 15, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

Red LED lights


power supply shot ... sometimes x board or y board

Oct 02, 2009 | Pioneer PureVision PDP-5030HD 50 in....

2 Answers

Plasma TV Does Not Turn On - continous Red Flashing Light


Had a similar problem with my Sony. Unplug for 36 hours and try again.

Aug 29, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

Pioneer PDP435PG inadvertently reprogrammed by Casablanca remote.


Some ceiling fans have jumpers that can be moved to select a different frequency but you have to be sure both the remote and the fan receiver are set the same. Other than that, you may have to use some creative control. For example, I can turn on my TV by pointing the remote at the wall opposite the TV

Mar 29, 2017 | Pioneer PDP-4350HD 43 in. Plasma...

1 Answer

Green blnking light on pioneer plasma - Picture does not come on


You can try a hard reset : Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works..


Good luck..

Nov 23, 2008 | Pioneer PureVision PDP-5030HD 50 in....

3 Answers

Too much green color


Problem solved. I tried playing DVD and the TV picture was fine. So I double-checked cable wires from cable box - one of the wires was loose (obviously it was the red color input). After tightening, the TV picture is good as new.

Mar 20, 2008 | Sony FWD-50PX1 50 in. HD-Ready Plasma...

1 Answer

Returns to standby


Green flashing 3 times = digital DC - DC converter fault
Red flashing 3 times = scan circuit fault

Oct 31, 2007 | Pioneer PureVision PDP-5040HD 50 in....

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...