Question about Epson Stylus Photo 1280 InkJet Printer

2 Answers

I have been hold for Fix-you to answer me back for awhile and I need help

This is what has been covered so for.
Hi. I am Fixe_You and I will be assisting you with your problem.
Fixe_You says:
hi

srodesign07 says:
Good Morning

Fixe_You says:
good morning

Fixe_You says:
so what is the problem 

Fixe_You says:
that makes ur morning bad today

srodesign07 says:
My Espon Stylus Photo 1280 prints half pages. (??) 

Fixe_You says:
half page.

Fixe_You says:
ok

Fixe_You says:
in color

Fixe_You says:
or in black

Fixe_You says:
or 2

srodesign07 says:
both. And the lights are all okay. No blinking etc.

Fixe_You says:
ok

Fixe_You says:
wha type of paper u r using

srodesign07 says:
regular bond, but I tried some photo paper yesterday and it wouldn't feed in. I had to push it.

Fixe_You says:
a3

Fixe_You says:
??

srodesign07 says:
A3? regular 8.5x 11

Fixe_You says:
yes

Fixe_You says:
cartriges??

Fixe_You says:
okay

Fixe_You says:
full??

Fixe_You says:
fine

srodesign07 says:
New cartridges and I just clean the head because it had been sitting for a while wiithout use. 

srodesign07 says:
Does it have anything to do with prefernces?

srodesign07 says:
Are you still there?

srodesign07 says:
Are you still there?

srodesign07 says:
Well, thanks so much for your expertise. I hope I 'm not charged for this. 

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 110 Answers

In the meantime... This will fix it


1. Click on START, CONTROL PANEL, PRINTERS AND FAXES (or PRINTERS AND OTHER HARDWARE).
2. Right click your printer, and select PROPERTIES. (If your printer is not listed, click on VIEW INSTALLED PRINTERS first).
3. Select the ADVANCED tab.
4. Select PRINT DIRECTLY TO THE PRINTER.
5. Click on APPLY (if applicable), then OK.
6. Restart your computer.
7. Try printing now.

Posted on Sep 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Epson Master
  • 19,396 Answers

Unfortunately some expert abuse of the chat system trying to assist in problems not related to their field of expertise.
Write an email at : premium.support@fixya.com and support@fixya.com.

here is the contact page

Ask the chat to be reposted immediately or to be refunded, if it is reposted you will get a better expert.

I will report the problem as well.

Regards

Posted on Sep 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO FIXE THE PROBLEMA OF DE FILE TTFSUB.GPD


Try this
http://getitherefree.net/ttfsub-gpd-download/

Nov 26, 2014 | HP LaserJet 1200 Printer

1 Answer

We have a pere feed motor problem. How do i fix it?????


If the paper feed motor is bad you have to take off the back cover and it is a white plastic motor. their is a metal cover over it that you have to remove (4 or 5 screws hold it on) to get to the motor only 2 or 3 screws hold the motor on.

Hope this helps if you have any more questions just ask.

Aug 20, 2010 | Kyocera CS-4035 Copier

1 Answer

Drum, alarm, and data lights on--won't prnt


This unit might need resetting!

Here's how..

There's two ways to reset it

First: Soft Reset
1. Open front cover.
2. Hold down button located under LED's until all LED's are lit.
3. Release button and make sure drum LED is off, then
4. Close cover

Second: Factory Reset
1. Turn the printer off.
2. Hold in the circular button on the front panel of the printer.
3. Turn the printer back on.
4. When the DRUM light is lit by itself let go of the button.
5. Hold in the circular button on the front panel again.
6. Once the Alarm light comes on, let go of the button.
This will perform a factory reset on the printer.

I hope that's everything you want.
Please accept this answer if this will help you.
Thank you for using Fixya.

Aug 01, 2010 | Brother HL 1440 Laser Printer

1 Answer

I just replaced drum and toner and now will NOT


reset it

Please try this

There's two ways to reset it

First: Soft Reset
1. Open front cover.
2. Hold down button located under LED's until all LED's are lit.
3. Release button and make sure drum LED is off, then
4. Close cover

Second: Factory Reset
1. Turn the printer off.
2. Hold in the circular button on the front panel of the printer.
3. Turn the printer back on.
4. When the DRUM light is lit by itself let go of the button.
5. Hold in the circular button on the front panel again.
6. Once the Alarm light comes on, let go of the button.
This will perform a factory reset on the printer.

I hope that's everything you want.
Please accept this answer if this will help you.
Thank you for using Fixya.



Please rate this answer and leave testimonial too!
Thanks

May 10, 2010 | Brother HL 1440 Laser Printer

1 Answer

Paper is lodged in the MX310 printer and I can not get it to come out by turning it on and off. Is there any way to take it apart?


Wow, been awhile since I've done that, but the answer is yes, there is always a way. First, however, try to pull the paper back out by grabbing it with anything you have available (pliers, tweezers, etc.) Hold or force the rollers not to move while you do this, or you will chance breaking a gear tooth on the smallest plastic gear. If this doesn't work, or you can't get the paper out, you will have to take it apart to release the roller assembly and take the pressure off the jam. Not familiar with your Canon, but on mine, I remember having to turn it upside down to first take the bottom cover off, and having to be careful taking it apart, to remember how everything went together. I wised up after awhile, and started taking photos as I went, and that helped a lot of times. You will need a phillips screwdriver, although I think they can use different screws- check the heads.
Be careful turning any gears- if one little tooth breaks off, you have a repair job on your hands. Take your time, there's a lot of plastic pieces that have to be just right when reassembled (paper detectors, gears, levers, etc.). Good luck, at the least, it's good experience and you might save a lot of money in the long run.

Apr 14, 2010 | Canon MX310 Office All-In-One Printer

1 Answer

How do i reset my brother hl1440 printer after putting in a new


try this

There's two ways to reset it

First: Soft Reset
1. Open front cover.
2. Hold down button located under LED's until all LED's are lit.
3. Release button and make sure drum LED is off, then
4. Close cover

Second: Factory Reset
1. Turn the printer off.
2. Hold in the circular button on the front panel of the printer.
3. Turn the printer back on.
4. When the DRUM light is lit by itself let go of the button.
5. Hold in the circular button on the front panel again.
6. Once the Alarm light comes on, let go of the button.
This will perform a factory reset on the printer.

I hope that's everything you want.
Please accept this answer if this will help you.
Thank you for using Fixya.



Please rate this answer and leave testimonial too!
Thanks

Mar 13, 2010 | Brother HL 1440 Laser Printer

1 Answer

The yellow caable for the c42ux will not fit baack on properly


OK - since you won't respond, we'll assume that the problem is a loose drive belt. To check this and repair it you will need to remove the printer top cover. Once you have done this, check that the spring assembly is intact on the left end of the drive belt. If it isn't you will need professional help to fix this. If it's OK, then look at the drive motor end on the right. If the belt has come off the drive pinion, you must loosen the two screws holding the drive motor. This will permit you to get the drive belt back on the pinion. Make sure the drive motor is held in the correct position when you re-tighten the two screws. Test the printer before replacing the cover.

Feb 04, 2009 | Epson Stylus C42UX InkJet Printer

2 Answers

Brother HL-5270DN PF Kit Problem


I found the answer in another group, from Sunshine3240:

Open the front cover and leave open while completing the following steps:
Turn the printer off.
Hold the 'go' button while turning the printer on. All panel lights should be on.
Release the 'go' button.
Press the 'go' button 2 times.
Pause.
Press the 'go' button 5 times.
The toner light should be off.
The paper light should be on.
Close cover. The ready light should be the only light on.


Jan 06, 2009 | Brother MFC-8460N Laser Printer

1 Answer

I cannot fix my paper jam. It says to open the back cover and remove it.


I WOULD SAY WE NEED MORE INFO, LIKE MAKE AND MODEL, BUT IF IT TELLS YOU TO OPEN THE BACK COVER I WOULD ASSUME THAT THERE HAS TO BE A COVER OF SOME SORT. LOOK FOR SOME SORT OF LATCHES OR FINGER HOLES OR ANY EVIDENCE OF AN AREA THAT CAN BE REMOVED. THERE SHOULD BE SOMETHING THERE. IF NOT, GO ONLINE TO THE PRINTER BRAND AND CHECK WITH THEIR CUSTOMER SERVICE FOR AN ANSWER.

Oct 30, 2008 | Office Equipment & Supplies

2 Answers

MFC-215C printer not printing


Hi, I had the same problem and found the answer from one website. Heres how you can fix it
1) Open the cover
2) Remove the empty cartridge
3) Close the cover without putting in the new cartridge
4) Open the cover and install the new cartridge
5) Close the cover and restart the printer (press power save to shut down and press it again to turn it on

It should go into cleaning and when you check the Ink Status monitor, it will detect that the ink is full.:) Hope this helps, it worked for me

Apr 02, 2008 | Brother Multi-Function Center® MFC-215C...

Not finding what you are looking for?
Epson Stylus Photo 1280 InkJet Printer Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...