Question about Office Equipment & Supplies

3 Answers

Error code OUr office has a Konica 3340 that was given as a contribution. We used it 2 days and have now received an error code 35-02. I called Konica and they said I need to have a tech come out and look at it. We don't have the funds for that so hjopefully you can help.

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you can help me to have a problem with Konica Minolta is published in 7130 code F 35-2

Posted on Nov 27, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Problem: The Digital Panel is Reporting Code 34-1, 34-2, 35-1, 35-2 or 36-2 Cause: The copier is having a problem with the fusing unit.

  1. This is occasionally a false alarm. Try turning the copier off for about 10 seconds and turning it back on. If the code doesn’t clear, please call 1-800-877-2679 for service.

Posted on Sep 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Konica 7130 code F-35-9 what doese it means

Posted on May 23, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Error code C0500 and C0501 means Fixing unit's temperature abnormality.

How to reset these codes?

To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.

Jun 14, 2017 | Konica Minolta Office Equipment & Supplies

1 Answer

Konica 7020

Did you blow it up, probably not.

Click this link for the everything.
  1. Choose the Category "Office Systems"
  2. Choose the model "7020"
  3. Click the error next to the Model dropdown box.
  4. Choose the 1876KB user manual called "User Manual for 7020, 7025, 7030 and 7035"
Or click on this link for the specific manual.

The error codes you seek are not in the manual, you'll have to call Konica to tell you what they are ... call Konica at (860) 683-2222.

Hope this helps. Rate a fixya!

Dec 10, 2007 | Konica Minolta DiALTA Di200 Copier

1 Answer

How can i reset a copier Konica Minolta Bizhub 36, error code 0501?

1. Call the service mode to the screen.
• Shifting to the service mode is available even when the service call is occurred.
2. Change the screen using [?] / [?] and select [Trouble Reset].
• The trouble reset key will be displayed in the service mode only when the service call is occurred.
3. Touch [OK] on the check screen.
4. According to the description on the screen, turn OFF the power switch, and turn it ON again more than 10 seconds after and check to make sure the machine operates normally.

DO NOT CONTINUE TO RESET the code is for the Hot Part called the FUSER. It can catch on fire! And that will ruin a perfectly good day!!!!

Jun 07, 2017 | Konica Minolta Office Equipment & Supplies

1 Answer

Konica minolta bizhub 600 givin error code c3802

FIRST, if this code comes back. Have a technician look at it DO NOT CONTINUE TO RESET the code!!!! AS this is for the Hot Part called the FUSER. It can catch on fire! And that will ruin a perfectly good day!!!!
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

Mar 03, 2017 | Konica Minolta bizhub Office Equipment &...

1 Answer

While doing printing after 6 or 7 print, the error code c2552 appear in konica Minolta c220, I have open the front door, after that error gone, Again same problem coming after 6 or 7 print.

C2552 Abnormally high toner density
detected Cyan TCR Sensor
• TC ratio in the developing machine, which is
determined by Toner replenishing amount control
mechanism, is 12 % or more for a given number
of times consecutively.

1Clean the TCR Sensor window on the
underside of the Imaging Unit if dirty

2 Reinstall Imaging Unit
3 Change Imaging Unit
4 Change PWB-M
5 Change PWB-MFP

Jan 24, 2017 | Konica Minolta Office Equipment & Supplies

1 Answer

Ow do i fix the error message MACHINE TROUBLE SERVICE CALL (0310) on my konica...

replace the print head. That's the part that houses the LASER. try this site for the part

Precision Roller Printer Toner Cartridges Parts and Supplies Office...

if not try local Konica Minolta dealer

Sep 28, 2014 | Konica Minolta magicolor 1690MF All-In-One...

1 Answer

How to remove error code service call 16H

Did you remove all the shipping parts. or go a bad belt replace with new one

May 13, 2014 | Konica Minolta KONICA BR BIZHUB C10X 1-SD...

1 Answer

Error code 4701 for Konica Minolta bizhub pro C6500

- 4701 error

Communication fifo problem error 4702/4701 of 5500;6500;6501 konica minolta mfp printers

1) reseat all connectors in Ipb

2)image memery controle board

Inspite doing all these if the problem persists please reload the firm ware/flash firm ware.

Last one is to replace image memory board only .no need to replace prcb; overall status board; nvram

Jan 09, 2012 | Office Equipment & Supplies

1 Answer

Hi, My konica 3340 is displaying the following message: -service please call: 18-04 with p-key handling errors Please help.

pretty sure is to do with main paper bin lift up mechanism try opening paper bins and using manual feed thru the side the try each bin in turn. hope this helps

Jul 03, 2010 | Konica Minolta Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

77169 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides