Making alot of noise going around - Maytag PYE2300AY Electric Dryer

buy a mechanics stethoscope at the auto supply.it is well worth the money.
Have a listen to the pulleys. do not touch moving parts!
just the stationary bolts.
listen to the alternator as well. an alternator can make alot of noise if the bearings are gone.

The WASHER will Spin Off Balance.,making loud noises.,and Shake alot.,you also may hear squeek noises from THE overloading of clothes..,in THE Belts too..around inside THE Pully."

Possible bushings (sway bar and suspension) if struts check out. Alot of times when you replace struts it amplifies existing worn bushings. Have struts rechecked and have bushings inspected.

Hi,

Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - teresa241964

hi

fan noise means one think, DUST !

or if its past its life cysle (ie: 3-5 years), its time to replace the fan.

you can remove the dust from the fan. If that noise persists, yopu must replace the fan , otherwise your friend will eventually dmage the CPU or mainboard or both.

hope this serves you well

Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you fortaking the time to educate me. " - teresa241964

sounds like a bud hub
your center hub is going bad causing drag on the belt

I know what you mean , some drives are LOUD .Try wraping it
with towels ,just kiding . I have recived alot of request to quite
these drives down , I am working on a sound insulator
that will wrap around the cd rom to knock 10-20db off
but i have to watch out for heat build up. Ill keep you posted.
Bobby.

I presume the unit works fine it's just loud, right?

Rob

Replace it. The bearings are going bad, or the blade.

check the felt around the inside of the door to see if it needs to be replaced