Question about Monroe 2020Plus Calculator

2 Answers

Sharp er-a330 cash register

Hi,
According to manual, cashier should only need to sign on when making first sale. Register is requiring cashier to put their number in each time they ring up a sale.

Thanks,
Lisa

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need to program a No Sale Button for my Sharp ER-A330

Posted on Apr 19, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 159 Answers

That's a programming option -- whether you have to sign in for each sale, or can just keep going until you do a Cashier Z reading. But this on is not in your Owner Manual. Most Sharpregisters have a deeper level of programming, called SRV mode. It's not marked on your mode switch, but it's one click past PGM. You need a SRV key to access it and a Service Manual to know what's there. Sharp doesn't supply the SRV key or instructions, because it allows you to change Grand Totals and other things that would allow an employee to steal without detection.

Any servicing Sharp register dealer should have the SRV key, and this change is simple enough that they might do it for free if you bring the register to them along with these instructions and ask nicely.

Turn to SRV mode.
910 . @/FOR CA/AT
Turn to REG mode.

Sign in and try running consecutive sales or No Sales without signing in between them.

You can still change Cashier numbers between sales by signing in with a different number.
If you touch the CASH # button without putting a number in first, it will sing out you current cashier, and you'll need to sign someone in again.
If you are in X/Z mode, and you touch the CASH # button, it will print a Cashier Z reading and automatically sign out all cashiers. Sign in before your next sale.

Good luck,
Eric

Posted on Jun 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ER-A330 register wants to beep every time I try to ring anything up.


You forgot to sign on. It has no operator assigned. Enter your PIN number and press CASH# button in top corner of keyboard. If you have forgotten your PIN number for sign on, you can program new ones. One of the users has programming manuals here:
https://the-checkout-tech.com/manuals/cashregisters/Sharp7.php

May 24, 2016 | Sharp ER-A330 Electronic Cash Register

1 Answer

Every sale we have to enter cash #


A dealer has set it to log off the cashier after every sale. You need to use the dealer manual to set the cashier to stay logged on. One of the users has it here:
https://the-checkout-tech.com/manuals/cashregisters/Sharp_ER-A310_and_ER-A330_programming_manual.html

May 10, 2015 | Sharp ER-A330 Electronic Cash Register

1 Answer

Reprogramed tax after initializing Sharp ER-A330 now will not accept any sntry


I believe the ER-A330 has a Cashier # button - it should be labeled CASH #. It has to have a cashier signed on to ring a sale. Most owners forget that, because the same cashier stays signed in all the time, and nobody uses the button. If I'm right, all you have to do is this (in REG mode):
[CL] 1 [CASH #]
and start ringing your sale. The CL was to clear the error condition, if it was in one. 1 CASH # assigned Cashier #1 to the register.
The reason the register has the button is so it can track sales totals for each employee or shift. The register can be programed to stick with one cashier until another is signed on, or it can force you to sign on for every sale. At the end of the day it can print the normal Z totals by touching the CA/AT key, and touching the CASH# key gives totals for each cashier, I think.
Initializing the register cleared the cashier assignment and got you into the predicament. Touching the CASH # key twice will also clear the cashier assignment, as will resetting the Cashier totals with a Z reading. In any of those cases, just go back to REG and touch 1 CASH# again (or a different number if you want to sign on a different cashier).

Oct 23, 2012 | Sharp ER-A330 Cash Register

1 Answer

E32


In Sharp registers, Error 32 means no cashier is signed on. It should be just a matter of touching 'CL' to clear the error, then '1' "CASH #" to sign on as Cashier 1. Go straight from there to entering a sale.
Sharp allows a program option to force signing on before every sale, but it's not the default. Somebody probably accidentally signed off by touching the CASH # button without a number.
Another program option which probably doesn't apply here is to hide the cashier code, putting only dashes or stars on the display & receipts. In that case you have to enter CASH # [code] CASH # to sign on.

Oct 21, 2009 | Sharp XE-A402 Electronic Cash Register

1 Answer

Sharp ER-A330 cash register. Have to enter Cashier # every sale.


You might need a special key to program this change, but try this:
  1. Turn the key to PGM
  2. Enter 9910 . @/FOR CA/AT
If you don't get an error, you're done. Turn back to REG sign on one more time, and try two or more sales in a row.

If you get an error, this kind of programming is disabled in PGM mode. you may have to take it to a Sharp dealer who has a Service key. Your MA (Manager) key can get you to any position marked on the Mode Switch, but the SRV key goes to two more unmarked positions beyond PGM. If you have that key or find a dealer who has, turn it one notch past PGM (to 7 o'clock position).
Enter 910 . @/FOR CA/AT
[Yes, it's a different number than in PGM mode.]

If you ever want to make cashier entry compulsory again, do the same thing, except enter 100 just before touching the CA/AT button.

The reason Sharp doesn't pass SRV keys with its registers is that you can totally mess up your register if you make mistakes with this key. Don't experiment with it, or your only hope may be to wipe all machine memory to get it working again.

Sep 29, 2009 | Monroe 2020Plus Calculator

1 Answer

Sharp er-a330 cash register prob'


The Sharp ER-A330 and ER-A310 both have a calculator function that turned out to be just trouble for users who don't need it and don't know how to turn it off. At the bottom-left of the keyboard is a button labeled PO. Normally you enter a dollar amount and touch that to Pay Out money from the till. On these models it also activates the calculator mode, allowing you to add and subtract numbers without affecting sales.Touch PO to turn calculator mode back off, and you'll have a cash register again.
Let me know if this isn't the fix you need.

Sep 26, 2009 | Monroe 2020Plus Calculator

2 Answers

ER-A330 SHARP CASH REGISTER PROGRAMMING MANUAL


Hello,

The original English Manual has been discontinued. The only manual available is the German Version located here.

Mar 25, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Monroe 2020Plus Calculator Logo

646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Monroe Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Monroe Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...