Question about Lightware Legend LS-8 Multimedia Projector

Open Question

Problem with Lightware Legend LS-8

I have LS-8 Legend Projector, when i turn it on, displays the typical Lightware logo with white background, then few minutes later displays the message that says no signal detected in blue or black background, the problem is that after 2 or 3 minutes turned on the image is missing, keep coming and going then finally the projector turns off itself. Any ideas????

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: Scout lightware projector. I have lost the original fuse.

The projector takes a 5 amp fuse. The manufacturer gave me the information.

Posted on Dec 05, 2008

projdoc
  • 2236 Answers

SOURCE: I have a Lightware projector

good luck finding anyone to fix that, much less anyone who carries parts. you can try finding a service center by searching the lightware site.

Posted on Aug 19, 2009

RedZone133
  • 25 Answers

SOURCE: Won't turn on.

It is cheaper to buy a used one off of ebay than have it repaired.It is so out dated that most shops won't touch them.If you buy another keep the old one for parts ,they are great little projectors.

Posted on Oct 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not projecting pc desktop


Hey if you go into system prefs > displays > arrangement you can drag the white bar on the top to the other screen you're using (status bar from the top and the dock). Not sure if that's what you're after but may help.

Jun 26, 2014 | Planar PR5022 Projector

1 Answer

Changing the lamp...how too


there is typically a door panel that will be secured by a screw. un-screw remove panel door and this will show you the lamp housing assy. it also could be secured by a screw (not knowing the model of your projector) then just pull towards you and it will come out. then pop the new one in.

Jun 01, 2010 | Lightware Scout XL Multimedia Projector

1 Answer

Light Ware Traveler won't display what is on my computer, using RGB.


If you are talking about transferring the image from your laptop to the projector, have you pressed the FCN key and the F3 key at the same time?

Dec 31, 2009 | Lightware Traveler CS-11 Multimedia...

1 Answer

Lightware VP100 has no sound


make sure the internal speakers are on. go through the menu under settings to find out and to turn them on.

Sep 09, 2009 | Lightware VP 800 Plus Multimedia Projector

1 Answer

Won't turn on.


It is cheaper to buy a used one off of ebay than have it repaired.It is so out dated that most shops won't touch them.If you buy another keep the old one for parts ,they are great little projectors.

Dec 16, 2008 | Lightware VP 800 Plus Multimedia Projector

1 Answer

I have a Lightware projector Model VP-800. It won't power on. Do you have a repair service in the 13211 zip code area?


good luck finding anyone to fix that, much less anyone who carries parts. you can try finding a service center by searching the lightware site.

Dec 16, 2008 | Lightware VP 800 Plus Multimedia Projector

1 Answer

Scout lightware projector. I have lost the original fuse.


The projector takes a 5 amp fuse. The manufacturer gave me the information.

Dec 04, 2008 | Lightware Scout Multimedia Projector

1 Answer

Can't project an image when I connect to ibm thinkpad


Make sure your video setting match your projector.Go to your >control panel and change the settings.Try setting the DISPLAY >Settings> to 800x600 or 1024x768."Always remember what settings you change so you will be able to reset them."

Oct 03, 2008 | Lightware VP 800 Plus Multimedia Projector

1 Answer

Can't get computer images to project


Hi, I have found out that you must have the laptop set to an external monitor, in the control panel, display area, click on 2, then you must have the projector turned on before you start the laptop so it can recognize that the projector is there. Also make certain that you allow the unit to cool off by turning the lamp off, leaving the fan on and open the door where the projection lens is located.

Jun 29, 2008 | Lightware VP 800 Plus Multimedia Projector

Not finding what you are looking for?
Lightware Legend LS-8 Multimedia Projector Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lightware Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Lightware Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...