Question about Mitsubishi VS-55609 55" Rear Projection Television

1 Answer

Vs-55609 is this image the one i would see if i have a bad convergence ic? thanks http://images.google.com/imgres?imgurl=http://forum.ecoustics.com/bbs/messages/2/252277.jpg&imgrefurl=http://forum.ecoustics.com/bbs/messages/2/278833.html&h=450&w=600&sz=59&hl=en&start=41&um=1&usg=__F92yuAidSaK7i-ss8ayGNARM74g=&tbnid=sQuOWa0mc6ng3M:&tbnh=101&tbnw=135&prev=/images%3Fq%3Dmitsubishi%2Bvs-55609%2Bconvergence%26start%3D40%26ndsp%3D20%26um%3D1%26hl%3Den%26rlz%3D1T4ADBS_en___US212%26sa%3DN

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 3,459 Answers

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.


You can find more details and solutions here on Fixya at the following link below. Or click HERE


vs-55609 - 3d884ac.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Oct 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The projection is out of alignment on my tv. Well i've tried adjusting the convergence at the 5 points on the tv but no matter how many times i press the adjust buttons the crosshairs don't move....


the convergence board is bad you need to replace the convergence ICs', to have it repair you are looking at 300-400 and if it was me I just buy a new LCD.

Aug 18, 2011 | Mitsubishi VS-55609 55" Rear Projection...

Tip

Mitsubishi Convergence IC Part Number List


<b>As there has been some serious errors made in identifying the IC's for Mitsubishi Convergence, I have posted the complete list for your use.</b><br /> <br /> <b>Mitsubishi Convergence IC Part # List (complete)</b><br /><br /><br />Ref # / Part # / Part Name & Description <br /><br />CHASSIS: VZ7 <br />MODELS: VS-45605 / VS-50605 / VS-50705 / VS-55705 / VS-60705 / VS-70705 <br />IC8C01 267P141030 HIC-<b> STK392-110 </b><br />IC8C02 267P141030 HIC-<b> STK392-110 </b><br /><br />CHASSIS: VZ8 <br />MODELS: VS-45607 / VS-50607 / VS-60607 / VS-50707 / VS-55707 / VS-60707 VS-70707 <br />IC8C01 267P141030 HIC - <b>STK392-110 </b><br />IC8C02 267P141030 HIC - <b>STK392-110 </b><br /><br />CHASSIS: VZ9 <br />MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709 <br />IC8C00 267P155010 HIC - <b>STK393-110 </b><br /><br />CHASSIS: VZ6-V15 <br />MODELS: VS-70803 / VS-80803 / WS-65903 / WS-73903 <br />IC8D01 267P120010 IC-H <b>STK392-040 </b><br />IC8D02 267P120010 IC-H <b>STK392-040 </b><br />MODELS: VS-50800 / VS-50803 / VS-60803 <br />IC8D01 267P120010 IC-H <b>STK392-040 </b><br />IC8D02 267P120010 IC-H <b>STK392-040 </b><br /><br />CHASSIS: V16 <br />MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905 <br />IC8D01 267P120010 HIC - <b>STK392-040 </b><br />IC8D02 267P120010 HIC - <b>STK392-040 </b><br /><br />CHASSIS: V17 <br />MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907 <br />IC8C01 267P150010 HIC - <b>STK392-570 </b><br />IC8C02 267P150010 HIC - <b>STK392-570 </b><br />MODELS: WS-55908 / WS-65908 <br />IC8C01 267P150010 HIC - <b>STK392-570 </b><br />IC8C02 267P150010 HIC - <b>STK392-570 </b><br /><br />CHASSIS: V18 <br />MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819 <br />IC8C01 267P150010 HIC - <b>STK392-570 </b><br />IC8C02 267P150010 HIC - <b>STK392-570 </b><br /><br />CHASSIS: V19 <br />MODELS: WS?55859 / WS?55909 / WS?65869 / WS-65909 / WS-73909 <br />IC8C01 267P155010 HIC - <b>STK393-110 </b><br /><br />CHASSIS: V20B <br />MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65 <br />IC8C01 267P141030 HIC - <b>STK392-110 </b><br />IC8C02 267P141030 HIC - <b>STK392-110 </b><br /><br />CHASSIS: VK20 <br />MODELS: WT-42311 / WT-A42 <br />IC8C01 267P141030 HIC -<b> STK392-110 </b><br />IC8C02 267P141030 HIC -<b> STK392-110 </b><br /><br />CHASSIS: V20 <br />MODELS: VS-50111 / VS-60111 / WS-48311 / WS-55311 / WS-55411 / WS-65311 / WS-65411 / WS-73411 <br />IC8C01 267P141030 HIC - <b>STK392-110 </b><br />IC8C02 267P141030 HIC - <b>STK392-110 </b><br /><br />CHASSIS: V21 <br />MODELS: WS-48511 / WS-55511 / WS-55711 / WS-65511 / WS-65611 / WS-65711 / WS-65712 / WS-73711 / WS-B55 <br />IC8C01 267P155010 HIC - <b>STK393-110 </b><br /><br />CHASSIS: K20 <br />MODEL: WT-42313 / WT-42315 / WT-42413 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V22 <br />MODELS: WS-48313 / WS-48413 / WS-55313 / WS-55413 / WS-65313 / WS-65413 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V23 <br />MODELS: WS-48513 / WS-48613 / WS-55513 / WS-55613 / WS-55813 / WS-65513 / WS-65613 / WS-65713 / <br />WS-65813 / WS-73513 / WS-73713 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V24 <br />MODELS: WS-48315 / WS-55315 / WS-65315 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V25 <br />MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 /WS-65815 / WS-73615 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250</b>

on Jun 10, 2011 | Televison & Video

Tip

Mitsubishi Convergence IC Part Number List


As there has been some serious errors made in identifying the IC's for Mitsubishi Convergence, I have posted the complete list for your use.

Mitsubishi Convergence IC Part # List (complete)


Ref # / Part # / Part Name & Description

CHASSIS: VZ7
MODELS: VS-45605 / VS-50605 / VS-50705 / VS-55705 / VS-60705 / VS-70705
IC8C01 267P141030 HIC- STK392-110
IC8C02 267P141030 HIC- STK392-110

CHASSIS: VZ8
MODELS: VS-45607 / VS-50607 / VS-60607 / VS-50707 / VS-55707 / VS-60707 VS-70707
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: VZ9
MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709
IC8C00 267P155010 HIC - STK393-110

CHASSIS: VZ6-V15
MODELS: VS-70803 / VS-80803 / WS-65903 / WS-73903
IC8D01 267P120010 IC-H STK392-040
IC8D02 267P120010 IC-H STK392-040
MODELS: VS-50800 / VS-50803 / VS-60803
IC8D01 267P120010 IC-H STK392-040
IC8D02 267P120010 IC-H STK392-040

CHASSIS: V16
MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905
IC8D01 267P120010 HIC - STK392-040
IC8D02 267P120010 HIC - STK392-040

CHASSIS: V17
MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570
MODELS: WS-55908 / WS-65908
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570

CHASSIS: V18
MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570

CHASSIS: V19
MODELS: WS–55859 / WS–55909 / WS–65869 / WS-65909 / WS-73909
IC8C01 267P155010 HIC - STK393-110

CHASSIS: V20B
MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: VK20
MODELS: WT-42311 / WT-A42
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: V20
MODELS: VS-50111 / VS-60111 / WS-48311 / WS-55311 / WS-55411 / WS-65311 / WS-65411 / WS-73411
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: V21
MODELS: WS-48511 / WS-55511 / WS-55711 / WS-65511 / WS-65611 / WS-65711 / WS-65712 / WS-73711 / WS-B55
IC8C01 267P155010 HIC - STK393-110

CHASSIS: K20
MODEL: WT-42313 / WT-42315 / WT-42413
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V22
MODELS: WS-48313 / WS-48413 / WS-55313 / WS-55413 / WS-65313 / WS-65413
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V23
MODELS: WS-48513 / WS-48613 / WS-55513 / WS-55613 / WS-55813 / WS-65513 / WS-65613 / WS-65713 /
WS-65813 / WS-73513 / WS-73713
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V24
MODELS: WS-48315 / WS-55315 / WS-65315
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V25
MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 /WS-65815 / WS-73615
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

on Oct 11, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

I have a VS-55609, after an hour of watching, there are blue and yellow shadows on the images


This may be loose solder if it occurs after a few hours. Otherwise if its permanent its the convergnce modules.

Apr 25, 2011 | Mitsubishi VS-55609 55" Rear Projection...

2 Answers

Mitsubishi VS-55609 distorted Picture Flickers


This is a convergence problem and not really a DIY Many amateurs try it to save money but end up spending more on it than a professional. There are dozens on here that managed to fix it for a day or two only to have it fail again.

cost of fix about $300.

Please rate my help++++Thanks for using FIXYA

Mar 24, 2010 | Mitsubishi VS-5059 50" Rear Projection...

1 Answer

I have a 55" rear projection Mitsubishi (VS-55609) and the blue looks offset to the right. Is this a convergence problem? If so do you replace one or both of the STK393-110 and other recommended hardware?...


Your symptom sounds like a damaged convergence IC.

There are two and large IC’s that control the convergence in a big screen set. They are secured to a very large aluminum heat sink2.gif. They will have a part number stamped on them that will start with an STKXXX-XXX, like STK392-110, and they are located on the signal board (on the left as you look into the back of the set).

Along with the convergence IC’s there will also be some associated components that will need to be replaced as well. There are some resistors that are part of the convergence circuit that will be open and need to be replaced. Most likely these will appear charred in the center. If you have an Ohm Meter or a DVM, check all the resistors that are close to the IC’s and you should be looking for either ones that have opened or have changed values.

I would suggest that you contact a service center in your area for a complete diagnosis and repair, as this type of repair can get a little tricky. But if you want to repair the set yourself, just remember to be careful. The capacitors and CRT’s can hold a charge and may shock you.


If one of the convergence IC’s are found to be bad, I would replace them both, if one has gone bad the other may go soon. I usually order my parts from Andrews Electronics in California; they will have the OEM components that you will need.
Their site is http://www.andrewselectronics.com/welcome.aspx
And their phone number is a 24-Hour Order Desk: (800) 274-4666
I recommend the phone order so you can talk to the person about the different types of IC’s that are available.

I would also advise that the convergence IC’s be OEM or better, just because they are cheap does not mean that they are a good deal. I have seen the cheap IC’s fail after a short time, even though they look exactly like the OEM IC’s. I think that the bottom line is that you will get what you pay for when it comes to the parts.

You can also try http://www.tvrepairkits.com/ , I have not tried them yet, but they do carry OEM or better parts.

I hope this information allows you to resolve this issue.
If you need any further assistance please respond to this post.
asnowman

Sep 23, 2009 | Mitsubishi VS-55609 55" Rear Projection...

1 Answer

Red convergence


I suspect you have a bad convergence ic bad the letters 0n the ics start with stk replace ic you will have a good shot that will fix it. you do need to be able to solder . be careful. there are 2 ics replace both .

mcm electronics for parts

thanks jay

Jun 01, 2008 | Mitsubishi VS-55609 55" Rear Projection...

1 Answer

Mitsubishi VS-55609


Can anyone tell me where the horizontal driver xformer is on the VS-5059?

Oct 23, 2007 | Mitsubishi VS-5059 50" Rear Projection...

7 Answers

Tried convergance, but would work


probably need to replace the convergence ICs inside the TV. The Ic is about 2" x 3" and mounted on large aluminum heatsink. Usually 2 or 3 (depends on model)

Jan 20, 2007 | Mitsubishi VS-55609 55" Rear Projection...

Not finding what you are looking for?

Open Questions:

See all Mitsubishi VS-55609 55" Rear Projection Television Questions

Mitsubishi VS-55609 55" Rear Projection Television Logo

1,200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...