Question about Konica Minolta bizhub 350 All-In-One Laser Printer

3 Answers

Problem with my Konica Minolta bizhub 350

It gives the error code c3451 when i send a work to print

Posted by on

  • mayea1956 Sep 03, 2008

    the front door you're talking about, is that the one covering the toner and the counter?

  • Anonymous Mar 24, 2014

    how to clear that error

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It gives the error code c3451 when i send a work to print

Posted on Aug 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

The code is for fusing warm up failure. Turn the machine on, wait for the error, then open the front door - you will see a cover on the right hand side which you need to unscrew and remove, behind that is a board (PWB-S1- Tech. Rep. Setting Switches Board) press the trouble button then reinstall the cover and shut the door. Your printer should now reboot - if the error comes back you will need to have the fuser either repaired or replaced.

Posted on Sep 02, 2008

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Copy redusing from adf

Posted on Jul 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica-Minolta bizhub 215 giving c3451 error message?


Error c3451 is a warm up error meaning the machine has not yet reached the correct temperature within a specific time. To Reset switch machine off using the switch inside the front door, not the one on the control panel. While holding the UTILITY key down on the control panel switch the machine back on keeping the UTILITY key held down. Eventually a Trouble reset key will be displayed in the LCD screen. Tap that, OK will be displayed then turn off the machine and then turn it back on. This will reset the error code, if the code reoccurs then there will be a problem with the fuser unit in the machine, and this will require replacing

Sep 18, 2015 | Konica Minolta bizhub Printers & Copiers

1 Answer

I would like a list of error codes for the Konica Minolta bizhub 350


http://www.printcopy.info/?l=en&mod=free&chap=erc&brand=Konica-Minolta&model=bizhub%20C350

Apr 14, 2015 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Rebooter


The problem is in the fusing unit,fuser warm up error.Enter in the service mode:Press utility key Meter count key introduction 00000000 press enter select trouble reset.

Jan 24, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Malfunction detected c3451


gives the corresponding malfunction code and maintenance call

May 17, 2012 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Konika minolta bizhub 350 Error c3451


error c3451 is abnormal heating temperature. al you have to do is reset the machine. open the back cover and on the main board look for a micro switch. press it will the machine is turn on. i hope this will help you.

Sep 16, 2011 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Getting c3451 error


There is no c3451 code in the bizhub 350 service manual.

Feb 20, 2011 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error Code C3451 in konica Minolta Bizhub C200. how do i solve this problem..


You will need to replace the thermostat and the best solution is to call a technician.

Jan 21, 2011 | Konica Minolta bizhub 200 Printer

2 Answers

I have a Bizhub 250/350 Konica Minolta it has a


the device takes too long to warmup. try switching off then back on when you see the message. if that does not work you will have to call for a technician i'm afraid. good luck

Apr 09, 2010 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Konika minolta bizhub 350 Error c3451


Hi there.

Try this It could do the trick for you.

The error code c3451 refers to a copier warm up error; the machine had not reached the correct temp within a specific time.

I bet it happened when you first switched on one morning.
Easy to reset and fault usually goes away.

To Reset switch machine off using the switch inside the front door, not the one on the control panel.
Whilst holding the UTILITY key down on the control panel switch the machine back on keeping the UTILITY key held down. Eventually a Trouble reset key will be displayed in the LCD screen, touch this, OK will be displayed then power the machine off and then back on.

This will reset the error code, if the code reoccurs then there will be a problem with the fuser unit in the machine, and this will requir
e replacing.

Hope it did work for you.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Mar 16, 2010 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

I have code c3451


Power off using left side rocker switch.
Power on while holding utility counter
Press trouble reset.
Cycle power (rocker)
If it comes back immediately you need to replace the fuser.

Mar 30, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

1,539 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...