Question about Proview PL926WBi 19" LCD Monitor

2 Answers

Monitor is slow to come out of sleep mode

Hello I have a Proview PL926WBi 19" monitor that is 2yrs old or a lil more. A week ago this issue started. When i move to mouse to bring the monitor out of sleep mode, all I get is blank screen with the power button lite blue and blinking off and on. If I wait 2-3 minutes it will come out of this state and work fine. I checked all my windows power settings and only have the monitor set to shutoff after 1hr all other settings are set to none. Does this sound like the same issue with the capacitors I read in a couple of other postings?

Thanks
jtatum65

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Proview Master
  • 848 Answers

This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:service@wisiny.com.thanks,we sincerely hope we can help you!
you can also check this boards whether suit you:

Posted on Nov 11, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 159 Answers

Hi.
Sounds like the power-inverter board is due for an overhaul.
Eventually it won't turn on at all.
I do redo many of these.
Fran

Posted on Oct 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ProView 19" Flat Screen Monitor comes on with


Hello,

The dark or black picture is caused by a failure in the back light power supply. The problem can be corrected by replacing a few parts called capacitors on the board. Replacing them will require a little soldering but anyone can do it. Here is a link to a page that shows what needs to be replaced.

http://www.ccl-la.com/blog/index.php/gateway-fpd1975w-monitor-repair/

I hope this helps, if so please rate my solution.

BuddyMc

Sep 17, 2011 | Proview PL926WBi 19" LCD Monitor

2 Answers

I need a base for a 19" PL926WBI LCD monitor. Have


i have the same monitor and it flashes on and off! i am willing to sell if you want to buy it

Dec 12, 2010 | Proview PL926WBi 19" LCD Monitor

2 Answers

Does my Proview PL926WBi 19


Any monitor will work with any computer provided the correct graphics card driver is installed. When you install Vista and you do not install the graphics driver, Windows will default to Generic VGA driver and you will not get the best resolution that the monitor can display.

Jan 29, 2010 | Proview PL926WBi 19" LCD Monitor

1 Answer

Computer power button for the monitor blinks blue


there are two reasons for this to happen there are blown capacitors inside the monitor and or there transistors on the board that have failed. both can be repaired.

Feb 25, 2009 | Proview PL926WBi 19" LCD Monitor

2 Answers

Pl926wbi 19"proview monitor,screen goes black every 3 seconds,


Bad capacitors on the pcb boards internally unsoldering ad replacement is indicated.

Feb 17, 2009 | Proview PL926WBi 19" LCD Monitor

2 Answers

ProView PL926WBi


bad capacitors on the board, replace these and the inverters should get there power.

Dec 01, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

ENERGY SAver is stuck on


I know it's an older post, but you still may be waiting an answer:
What is probably happening is Your power board is failing to maintain power enough to run the bulbs and the rest.
That is why it takes long to start up and why it goes into sleep mode.
Does the power button stay lit (getting signal) or turn to amber (sleep mode) or does it flash.

powerseller
bammbammfran

Sep 04, 2008 | Proview PL926WBi 19" LCD Monitor

2 Answers

Blank screen with message "mode not supported"


Hi

How have you connected the monitor to the computer?
Is it through the vga or the dvi port?
Pls press the monitor menu button and change the mode to vga or dvi depending on the connection that you have now.
You might also get a vga to dvi adapter and connect the monitor to the computer.

Feb 21, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

ProView 19'' Widescreeen LCD Monitor problems


It guess it is upon the logic board is having problem.

Feb 10, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Monitor turns on then off.


I bought Same Monitor Dec. '06 and Jus last week It faded to black and then now doesn't power on. my protection plan sent me a new one that powered on for like 20 secs. So now I have another one coming. I also knows its not my PC cuz I'm using a monitor right now. I think Proview and Circuit City Sucks

Jan 11, 2008 | Proview PL926WBi 19" LCD Monitor

Not finding what you are looking for?
Proview PL926WBi 19" LCD Monitor Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computer Monitors Experts

Diego Zenizo
Diego Zenizo

Level 1 Expert

22 Answers

Brad Brown

Level 3 Expert

13531 Answers

Terry Allen
Terry Allen

Level 3 Expert

680 Answers

Are you a Proview Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...