Question about Nextar MA566 MP3 Player

1 Answer

Install battery Help! I know it must be very simple....can't open the door to install the battery...whats the trick??? Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove the cap that covers the USB connector.
Then the cover door will slide down.

Posted on Sep 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ion block rocker won't hold a charge


Yes you can! I just did today. You need a philips screw driver.
If you have the white ion Block Rocker, find the access panel to the battery on the side of the device, (Facing the speaker it's the side to the left).
I suggest using a kitchen counter, island, tool bench for doing this job.
1. There is a simple 4 screw access door. Find it (opposite the side that has the charge lights and power switch).
2. Remove the screws, put in cup or saucer.
3. The door itself is super tight fitting, and you will need to turn the box on its side, battery door facing down, and gently bounce/tap/knock the device to work the door out were you can grab it with finger nails and work it open. (Gentle and patient but purposeful drops from an inch or so, no more, checking each time to see if the door opens. You don't want to damage the equipment. Pull out door and set aside.
4. Battery is also super tight in the access and suggest the same method until you can get some fingers on on the battery and work it out. I had to uncouple the horseshoe connectors + and 1 from the battery before i could pull the battery completely out.
5. Go to Battery PLUS, or Radio Shack with the battery in hand, to ensure you get the right one. SIZE MATTERS IT MUST BE EXACT. get a new one and RECYCLE THE OLD BATTERY with the store.
Follow reverse order to install.
Good Luck and let me know if it works. Dave S. Show Less

Dec 16, 2012 | ION Block Rocker

1 Answer

I bought Transcend MP860 last month. when i start charging thru PC it shows the message charging error insufficient voltage.When I finish charging it fully until it displays the message and start playing...


This is a common problem with these players (first link). My MP860 failed in this way (insufficient voltage etc message)
I made a rig with laboratory PSU (several amp output) connected to USB socket and I know that that the problem has nothing to do with voltage (voltage was stable 5V - tested also higher up to 5.5V)
For a while a trick with holding the volume up button worked for me. (see second link) But once I discharged the battery to a too low level and the trick did not work anymore.
My conclusion is that that message indicates Li-ion battery degradation and charger circuit/FW declines to charge it showing misleading message. (battery made by Foxlink)
I tore my the player open and rigged charge circuit and get it working again. Photo: http://farm6.static.flickr.com/5063/5683361395_d59bef8142_b.jpg
Few suggestions: 1. Never allow the battery to be fully discharged. Charge at any opportunity you have. 2. Once you get the Insufficient input voltage message try trick with holding volume adjustment. 3. If 1., 2. failed rip it open and make charging circuit or replace battery. 4. Do not buy Transcend MP3 players. (?)
http://ec.transcendusa.com/forum/viewtitle.asp?BoardID=42&TitleID=915&Page=1
http://www.mouthshut.com/review/Transcend-MP-860-rnlstlqtln

Apr 11, 2011 | Transcend T.sonic 610 MP3 Player

4 Answers

Kingston KPEX100/1GB Battery Prob


it is simple, i had the same problem, i used nokia 6300 battery, worked without any problem, it also expaned the battery life, in 10 hours of playback battery was half

Jan 26, 2008 | Kingston Kpex100 Digital Media Player

2 Answers

30 GB Ipod stopped working


sounds like the micro swich is frozen the only thing i can sugest is to stick it a warm place for a couple of days a aring cubard will do fine if this fails then ask the manufactuers what the problem is ? you can email them Apple Website

Jan 24, 2008 | Apple iPod MA446LL/A MP3 Player

2 Answers

Door does not open


can u please be more detail with the problem. what door is nnot opening. what company is the product belong to??

Dec 27, 2007 | MP3 & Digital Media Players

1 Answer

Iriver H10 20GB


Simple reset should do the trick - remove and reinsert the battery.
If the problem persists, check the iRiver website for a firmware upgrade - their site is not the most user-friendly but it is CHOCK FULL of information.

Here's the link to the manual:
http://www.iriver.com/support/down_view.asp?searchProductIdx=61&searchCategoryIdx=2&searchString=&page=1&idx=710&tmpSearchProductIdx=&tmpSearchCategoryIdx=&tmpSearchString=

Nov 12, 2007 | iRiver H10 MP3 Player

Not finding what you are looking for?
Nextar MA566 MP3 Player Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nextar MP3 & Digital Media Players Experts

Joseph Hoffmann

Level 3 Expert

1687 Answers

Matt Piilo
Matt Piilo

Level 1 Expert

36 Answers

Are you a Nextar MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...