Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer Model # 92587210 Cereal # CE3111334 Kenmore top load washing machine. My washer stops when agtitating. What's worng?

Posted by on

  • jaimeleigh Sep 08, 2008

    It agitates and then stops completely. I dont hear anything and it still drains water it was spinning still too.

  • Reinaldo Cartagena Dec 04, 2008

    my washer machine does not spin in the cicle,water stays in the waser. thank you

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Has it stopped agitating completely now or does it start each time then stops? Do you hear anything - say like a humm when you try it afterwards. Dose it spin/drain water from washer?. Post a response so we could know what next

Regards

Posted on Sep 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer won't stop running.


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.


This sounds like a Timer problem. See the following Whirlpool / Kenmore Service Manual for top load / direct drive washers. It has a troubleshooting section and test procedures.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf



Apr 06, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Top loader series 80 Kenmore doesn't stop after the whole wash cycle, it goes directly to 2nd rinse, then spins again and stops?


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.

Since it does everything else, the problem points to the timer.

See the following Whirlpool / Kenmore installation and service manual for top load, direct drive washers with an extensive troubleshooting section.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf


Oct 14, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

My Kenmore 110 92587210 Washer is slowly letting water in


The solenoid for the cold water valve has failed in the open position and needs to be replaced. The valve unit is for both hot and cold. It is the item that the water hoses are connected to.

Aug 26, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Will not agitate 110 92587210 Kenmore Washer


I have 2 words for you: "dog ears".

the dog aggitation ears are what cause the aggitator to aggitate. Those things wear down and not grab after time.

Pretty easy to change out. You just need to pull the aggitator out and change the 4 little plastic ears. Good luck :)

Jul 13, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 90 washing machine does not spin or agitate


make sure your pump is not clogged or jammed..that will stop the motor,,quick test,,pull pump off and start unit in wash,,or spin if unit is empty..onthejob

Jan 31, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Top Load Kenmore 100-92587210 wasn't agitate


you want to grab the agitator and see if you can spin it both ways if so you agitator dogs are bad and all you have to do is take the softner cup if you have one if not there is a cap that just prys up on the top of the agitator then there is a 7/16" bolt in the center take it out and pull the agitator out then the agitator will pull apart top from the bottom in the top part where the bolt is there is 4 looks like dog ears that need to be replaced

Dec 28, 2008 | Kenmore 3.5 cu. ft. King Size Capacity Top...

1 Answer

KENMORE TOP LOAD WASHER


i have the agitator dogs, but my agitator is not turning. Can you help me in getting it off. kenmore model 11022954100. please help !!!!!! wife is tearing me up!

Oct 29, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...