Question about Yukon NVMT (4x50) Monocular

1 Answer

YUKON NVMT 3 ( 4X 50 )

Above lights up switchwise but no image of any kind - black.
It was dropped, but worked for night after perfectly.
Also - I was away - the eye section was turning when I returned from holiday - it does not have objective lens - could this be reason ?
Thanks, Martin ( Ranger )

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 571 Answers

'it does not have objective lens'?! Yes, it could be the reason why you cannot see anything. Your NVMT should have a lens in both ends. It's just a regular telescope with some extra features.

Posted on Oct 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When is best time to sight in ATN 390?


At night. You can sight in the 390 during the day in simi-darkness with a day light lens cover over the front of the scope. (the snap cover has a small hole in the center for look see during the day) 50 foot room with a target, bench rest and a rifle vise. You'll also need laser bore sight Figure you rifle ammunition ballistic and how many yards before it starts to drop. Set the 390 reticle to the red do on the target one or two inch above. Dead center set up will give you about two hundred yards on center... approx. Now you know this is a static test or sight in. During night because of some distortion and noise from the scope. stewbison

Feb 17, 2011 | ATN Aries 390 Paladin Weapon Sight

2 Answers

Yukon Ranger 5 x 42 night vision goggles just stopped working, I put in new batteries, but when I press the ON button the on light, which is red, just flashes maybe 10 times and then all goes black. ???


Hello, let do this. IR illuminator has a montary switch, that is when you push it comes on, and when you release it the IR goes off and it has a red LED to indicate the IR illuminator is being activated.

When you turn you binocular on there will be a green LED activated. This switch is DTSA---double throw sing activated. That is, one throw of the switch it turns on the binocular, the throw will turn off the binocular.

Also within the control panel there is timing circuit to keep the IR illumniator on for ten second the shuts off. Make sure you have the right switches etc. Let me know, then we can brain storm on this matter. stewbison

Jan 29, 2011 | Yukon 28041 Binocular

1 Answer

Extended viewing distance when fitting a external i/r flashlight and his it worth fitting a rifle scope adapter ,what viewingdistance will be lost with or without it thaks trilby


well its a gen "1" unit so any extra "ir" light will help out a lot! i use a deban gun light 50 watt buld with an "ir" filtter fitted to the light i can see nearly 1/2 mile and i can just about target a rabbit at no more than 100m with my sight set at x5,,,(3-9x50 with a 30mm bore) there not all there cracked up to be,,you loos a lot of light going through the scope,
to have a good night sight you need to go to gen 3!!!! so you need to sell your sole to buy one!!!

Jul 06, 2010 | Yukon NVMT 2x24 Gen 1

1 Answer

The yukon NVMT 4 was turned ON and then flashed. Cover was on. Now the ON lights, IR Light works but visor is all grey and appear small lighting on bottom corner.


The scope may flicker or flash when used in a bright environment. To fix this you should only use a NVMT in a dark. It will restore itself in a few minutes or hours, depending on how long it has been exposed to light.
It may also flicker for the first several seconds of use in dark, before the device corrects itself.
With a severe exposure to bright light for prolonged time the light enhancing unit may damage beyond repair.

Oct 20, 2009 | Yukon NVMT (4x50) Monocular

1 Answer

Monocular has poor focus picture barely clear


Weak battery (below 2V). Lens cover on. Focus off (it can be adjusted). Too bright environment.
Without handling the scope myself these are the best guesses.

Oct 10, 2009 | Yukon NVMT 24022

2 Answers

Yukon spartan my pic is not clear light works but cannot get focu


Define 'clear'.
Is it blurry? Focus the scope or clean the lenses.
Is it distorted? Don't know how to fix. Especially if the lens is cracked/scratched etc.
Is it dark/snowy? Put fresh batteries in.
Do you see black spots in the tube? Don't worry, certain amount of these are quite acceptable.
Anyway: It's a night vision for pete's sake. The picture won't ever be like the one on normal binoculars.

Jan 17, 2009 | Yukon 24021 Monocular

3 Answers

Night owl / night vision


Unscrew front lens front of intensifier tube should have an even bronze tinted coating on glass if it is grey and blotchy the tube is degassed. common fault with this model nightvision
wayne

May 30, 2008 | Night Owl Optics Aero NOAR25 Monocular

2 Answers

Yukon night vision monolular 4x50 lense


Try to jank it left-right and simultaneously try to force it back to threads (either pulling or pushing). Don't hit it with anything since this may damage the insides.

Oct 10, 2007 | Yukon NVMT 20040WP Monocular

1 Answer

Focusing Yukon NVMT 20040WP Monocular


It should focus normally from some 50ft up. Try to adjust the dioptery on the rear ocular.

Mar 19, 2007 | Yukon NVMT 20040WP Monocular

Not finding what you are looking for?
Yukon NVMT (4x50) Monocular Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yukon Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3185 Answers

kakima

Level 3 Expert

98762 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Yukon Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...