My monitor is on but no image at all the cpu is ok when i tried it to other monitor, but with my monitor it is black out but when i try to on and off the monitor an image will pop and turn to black out again

The monitor shows no signal probably it didnt detect the tower
Ill be advising you to remoev the cable that conencts the cable
used a clean cot or rug clean both ends of the cable , clean also the area whre you plug in the cable , the ports on the monitor and on the CPU make sure its clean .
Then plugged it in , in case nothing happens
try to used another cable that conenct from the monitor to the CPU
you may aslo try to used other CPU to checked if monitor is working fine or try other monitor to checked if the port on the your CPU is working fine

try to connect another CPU on your monitor to check if your monitor running in good condition, if the display same problem,your monitor have a problem, you need to troubleshoot or as an assistant of a technician to repair your computer....if this monitor connect to another CPU is working, check your Video card if you have if none try to purchase a new video card because in your case the problem is video card adapter...

hi!


if your cpu system is okey and there is no display in your monitor, try another monitor and if still no display check you video card, if so replace it with external video card.


thanks!!!

hope it helps!!!!

Here is what you need to do to know if your monitor is defective. Plug the power cord of the monitor. Turn on the monitor. If the monitor display image for a second and then black out then the monitor is OK. If not you will need to replace it.
If the monitor is OK.. look for other possible problem. Next to it aside from checking the cable (connecting your video card to the monitor) the one to check is the video card.. the signal from the cpu will pass through the video card to your monitor. If no reaction to the monitor then its the video card.

try this....

remove the vga cable at the back of your monitor or at the other one in your cpu..

get it?? the one that connect the cpu and the monitor..

then try to turn on your monitor if there is a message says like this " no signal output" or no video output"..

it means your monitor is ok and you have a problem in your cpu...

sometimes that is the problem....

first you ensure that it is a problem with TFT or CPU. you can check it with another monitor. if it is working with another monitor then your TFT has been faulty.then you can repaired it from service center.

Please shine a flashlight on the monitor screen.
If you see a dim image on the screen the back light needs to be replaced.

If it still shows black try another data cable from the monitor to the computer

If that still did not work as the machine is turned on remove the data cable connector from the computer. Check the monitor screen to see if it says no signal. If it does not the LCD screen on the monitor needs to be replaced. If it does the computers graphics card needs to be replaced.

could be the whole pc is fried :(

It is the Monitor Cable connected to the CPU cabinet is faulty. Please check out the cable and its pin firmly.

Try to find the fault, may be the cable broken or tear up.

Let me know if further diagnose required.

Have a nice day.

Ellin

rset ur memory card thats all