Question about Toshiba TDP-S8 Multimedia Projector
When the ON/STANDBY button on the TDP-S8 is pressed, the green light cycles from on to off, then back to on; usually nothing else happens. Occasionally, the lamp inside comes on for about 2 seconds, then goes out. The device does nothing else. Resetting the power does not help. I have never received the message indicating we are approaching the lifetime hours of the bulb. Any idea what's wrong?
I have the same projector, and had the SAME problem.
After unplugging and taking on a trip it didn't work...it just lit up for 2 secs, and then shut off....
LEAVE it plugged in for as long as it takes for the light to stop blinking, and then it should start up on its own, or if you press the on/standby buton.
Be patient, hope this works for you too!
Posted on Sep 03, 2008
SOURCE: projecter not working
I have this same problem with no indication of what is wrong with the projector. I have checked the bulb and see no lines (veins) or bubbles on it.
Posted on Aug 04, 2008
the power supply needs to be replaced. if you're good at soldering, there is a capacitor that dries up quickly on the ps board. i believe it's c2.
Posted on Nov 11, 2009
Tips for a great answer:
Mar 08, 2010 | Toshiba TDP-S8 Multimedia Projector
Nov 09, 2009 | Toshiba TDP-S8 Multimedia Projector
Feb 01, 2009 | Toshiba TDP-S8 Multimedia Projector
Aug 23, 2008 | Toshiba TDP-S8 Multimedia Projector
153 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: