Question about Dremel 764 04 Pumpkin Carving Kit Includes 6 Volt Minimite Cordless Rotary Tool And 10 Templates

1 Answer

Cutting holes How do I use the attachments?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Dremel 300 came without any instructions, so I had to puzzle out how to use the circle cutter. None of the images I managed to find on the Web or elsewhere were any help. I directed my attention to the "spike" on the circle cutter, and eventually I realized that it was on the wrong (top) side of the cutter--perhaps for safety's sake. When I removed it and positioned it on the bottom side of the cutter, things became clearer. The next thing was to locate the correct cutting edge. I had never used Dremel before, so I didn't recognize the cutting "bit", since it looked like a drill bit. The final problem was how to attach the circle cutter to the Dremel tool. I couldn't see any way of fixing the cutter to the tool. I thought perhaps there was something missing--a connector, perhaps. Eventually I found a reference on the Web to "removing the cap" on the tool. I hadn't noticed a "cap", but when I gave it a turn, it began to unscrew, so I knew I was in business. Finally II tried the attachment out on a piece of scrap timber, I found that it worked. A simple instruction manual would have saved me a lot of time. Also, I now discover that the Dremel 400 would be much more useful than the 300. Dremel don't seem to be very customer friendly. I can access the US site, but the UK and Germany website won't let me in!

Posted on Sep 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for replacement blades for Black & Decker Zip Saw


Its on ebay http://www.ebay.com/itm/NEW-BLACK-DECKER-ZIP-SAW-11-PIECE-CUTTING-SET-74-691-/260888941452
only 15.00

Apr 02, 2012 | Saws

1 Answer

I have a hole in the hose can it be repaired


I have never heard of a good fix for a hose hole, but I have had many and if it's close to an end, cut the piece with the hole off and buy the appropriate male or femail end (attachment) and install at the end of the hose. If it's in the middle and cutting the end off would lose too much hose, cut on either side of the hole and buy/insert a special piece and install both cut ends to it.

Mar 28, 2012 | Garden

1 Answer

Can the hand-held shower hose be replace without accessing the plumbing underneath the tub? I can't figure out how to disconnect the existing hose from the diverter without cutting an opening under the...


No, you need to cut a hole. Usually an access panel is provided during the initial installation, either in the ceiling from downstairs or in the other side of the adjacent wall. But it's pretty easy to add one. After you cut a nice rectangular hole, you can cover it with a piece of painted plywood that has a trim piece attached to the plywood. The plywood is held in place with a couple of screws. When you remove the panel, the trim stays attached to the plywood. When you place the panel in the hole, the trim covers the gap between the drywall and the plywood.

Dec 01, 2010 | Grohe 25 597 Talia Tub Filler w/Personal...

1 Answer

I have a 1999 taurus and there is a tee at the rear of the motor that the heater hoses connect to. There are permanant fittings on the tee. The tee has a hole in it. Can I just cut the hoses and put a tee...


Yes, they sell nylon barbed heater hose fittings in a tee. After cutting hoses & attaching to tee with hose clamps. Take zip tie or wire & attach it to bracket for support of hose.

Aug 05, 2010 | 1999 Ford Taurus

1 Answer

Cannot stop the shaft from turning to remove lock nut fs400 to remove brush cutter blade


With unit in normal operating position, the operator can see the small hole on top of the gearbox. Insert a blunt ended metal dowel rod into that hole to lock the gearbox and remove the cutting attachment. NOTE: The locknut is left-hand thread.

Sep 20, 2009 | Garden

1 Answer

Brittle fuel lines


You have to pull the fuel line through the hole in the tank because the hole is a little smaller than the fuel line, otherwise it would leak. Use a thin piece of wire, I use a tag wire, cut the fuel line at an angle on the end, stick a hole in it then stick the wire through hole in the tank and out the cap hole. Stick the wire through the line and twist it around itself and pull the line through. Leave enough line in the tank to attach the fuel filter and attach the other end to the carb

Jun 20, 2009 | Homelite Garden

2 Answers

How do you intall the cutting string on a Flowtron leaf eater?


I have an electric weedwacker which may be different. In the leaf wacker there are four small holes very near the center screw on the revolving shaft. These holes form two small tunnels. cut two pieces of line (10-12 inches) and stick one through each tunnel. Center each line, put the two ends together and poke them out through the small hole on the edge of the rotating shaft. You end up with two sets of plastic line facing out from the central shaft. Flowtron may be different. Good luck.

Mar 23, 2009 | Flowtron LE-800 Electric Leaf Shredder

1 Answer

Tasks usage


Cutting holes in wallboard, Removing grout, Deburring metal, Cutting fiberglass, Sanding in tight spots, Cutting the heads off stripped screws, Shaping metal, Cutting ceramic tile, Stripping old paint and varnish from woodwork, Removing window pane glazing, Grinding, Shaping and cutting in arts and crafts projects, Polishing metal, Engraving, Etching, Cutting marble, Cutting nails, Cutting plumbing pipe, Sharpening tools, Cutting wood.

Aug 27, 2008 | Dremel 764 04 Pumpkin Carving Kit Includes...

1 Answer

How do you attach cutting wheel to the bit?


You need a # 402 bit. This comes with a screw on top that detaches and goes through the hole in the cutting wheel (very small hole). Then just re-attach it to the bit and you're in business. Depending on the particular cut-off wheel you're using, the wheel can be extremely fragile. Even though it will cut steel, it is brittle. ALWAYS wear safety glasses when using a cut-off wheel particularly, they will inevitably shatter and go flying!
Probably best to go to a local hobby store, buy a few bits for $10, and pick the owners brain about the tool.

Jul 02, 2008 | Dremel Variable - Speed Multipro Rotary...

Not finding what you are looking for?
Dremel 764 04 Pumpkin Carving Kit Includes 6 Volt Minimite Cordless Rotary Tool And 10 Templates Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

Mike

Level 3 Expert

4334 Answers

kakima

Level 3 Expert

102366 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...