Question about Washing Machines

1 Answer

Washer Not Responding at all

The timer will go through the entire cycle, but it does not agitate or spin, it filled with water and then failed, the fuse is ok, is there a relay that could need to be replaced? I have tried turning the timer switch to every different point of the cycle and nothing responds.

Posted by on

  • alex12an34 Sep 01, 2008

    I have the same problem...Any tips?...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,543 Answers

This is listed as a generic washer problem (no brand or model) so this is very general advice. If the machine fills but then makes no other noises, and place on the cycle, you most likely have a problem with the lid switch. If it just hums when it should agitate or spin, check for object in pump or bad motor. Need more info from you to dig any deeper.

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 21882 top load Kenmore washer will start the cycle but stops after filling up; i can restart the cycle by pushing the knob in and going a little further in the cycle then starting again. But after a...


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    My wahser just stopped working it filled with water and then started agitating and then all the sudden stopped please help


    When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    It wont complete cycle and empty the water just hums for a while and then turns its self off


    The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    Jan 17, 2010 | Fisher and Paykel Fisher Paykel Intuitive...

    1 Answer

    Won't finish the final spin


    Hi there,

    When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

    It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


    It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    Post further comments for more information ....

    Good Luck!!

    Thanks

    Aug 28, 2009 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    The washing machinge is not completing the complete cycle


    When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

    • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


    • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    Jul 11, 2009 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    Stops in the middle of wash cycle


    Hi!

    If the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
    It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
    It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
    Please do rate this solution as FixYa and revert for further assistance.

    Thanks
    Rylee

    May 29, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

    1 Answer

    As washer was on final spin cycle it sounded like a belt came....


    it's probably the timer or a cold-water supply problem:

    • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


    • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    Apr 01, 2009 | Kenmore Washing Machines

    1 Answer

    Kenmore stack washer and dryer


    gabehart....sounds like belt is slipping. Replace it. The water pump is on a separate smaller motor so is not affected by the agitator/spin motor.

    Jun 04, 2008 | Kenmore 98702 Stacked Washer/Dryer

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    42 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Washing Machines Experts

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    yadayada
    yadayada

    Level 3 Expert

    63242 Answers

    Are you a Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...