Question about Entrega (HUB-4U) Networking Hub

3 Answers

Entrega Hub 4U

I lost the book and the power supply. What power supply do I need? Voltage, etc.

Posted by on

  • Anonymous Feb 24, 2009

    I have the same problem, lost operator manual and external power supply. So is the 120 vac the input voltage to the hub or is this converted to a lower dc voltage input to the hub?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

The adapter that works on my machub4u y Entrega Technologies has a output of +5VDC at 2.5A with the inner post being positive and the barrel being negative.

Posted on Apr 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am working fine with a 5V/1A adaptor.

Posted on Nov 28, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 24 Answers

Power Power Device: Power adapter - external
Voltage Required: AC 110/220 V ± 10% ( 50/60 Hz )
Power Consumption Operational: 2.5 Ah

thank you

Posted on Sep 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Supply voltage needed


power supply should be +5VDC/2.5A,

as this "masterpiece" was not that hot when it was first made (year 2000!) i would suggest rather purchase of new hub than wasting money on power supply for that one.


Jul 26, 2010 | Entrega (HUB-4U) Networking Hub

1 Answer

What power supply is required for the Bafo 700 7 port usb hub ?


Probably the one it came with?

Anyway, if there are details about voltage and amperage on the back of it you could buy an aftermarket switching powersupply.

The voltage output of the powersupply has to be within 5-10% of what the hub needs, but the amperage can be equal or higher. (anyone who disagrees with this is wrong)

May 26, 2010 | BafoTech BAFO (BF-700) Networking Hub

1 Answer

Lost mt power supply cable, can you tell what the input voltage is for the HUB 4U is?? Also can his be used om a Mac OX 10.4.11 Dave


Since the manufacturer is out of business, it is hard to find any information on this hub, but you can find more details here or here (for Mac).

The voltage for the adapter has to have an output of +5VDC with minimum 2.5A.
Important!!! - The inner post is positive and the barrel is negative.

And - yes - it can be connected to a Mac since both versions are technically identical.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Nov 04, 2009 | Entrega (HUB-4U) Networking Hub

1 Answer

Lost Power Adapter for Unicom Mini-switch/8 8 port


method 1: buy a power adapter that has a switch controlled output voltage - they usually have 3V - 4.5V - 6V - 7.5V - 9V and 12V selectable output. Start with 6V and if its not working unplug, select 9 and try again etc. etc.

method 2: open the case and locate an electrolytic capacitor right near the power plug - the biggest one. Note the voltage (for example it may say: 1000uF/15V) and have in mind that your device MUST work at a LOWER level that this.

you can combine the two methods to be safe...

Oct 02, 2009 | Port Incorporated 8-port 100Base-TX Mini...

1 Answer

Power required


label should say something about that. Most likely 12v

Jan 28, 2009 | Entrega (NET-HUB-3U1E) Networking Hub

8 Answers

Power supply for Targus 4 hub usb 2


Most USB hubs do not need an external power supply, except when a connected USB device draws more power than the computer/laptop USB port can supply. In this case an external power supply will need to be connected to the USB hub.
Normally this would be a 5 volt power supply, but make sure the polarity on the connector matches the power connector on the hub, check the label on the hub, sometimes it states to power requirements of the hub as well as the polarity on the connector. Normally the pin on the hub's power connector is positive (ie. +5V)

Nov 13, 2008 | Targus PAUH217U 4-Port USB Hub

2 Answers

No power supply machub7u


5V DC 3.7A center+ polarity Adapter
Jay........

Apr 14, 2008 | Entrega (HUB-7U) Networking Hub

3 Answers

DC power adapter


The adapter for the DE-805TP supplies 9 volts dc at around .5 amps

Jan 13, 2008 | D-Link DE 805TP (DE-805TP)5x10 Mbps...

2 Answers

7 port usb hub


5V DC 3.7A  center + Adapter : )      Jay........ 

Dec 30, 2007 | Entrega (HUB-7U) Networking Hub

Not finding what you are looking for?
Entrega (HUB-4U) Networking Hub Logo

Related Topics:

1,138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Entrega Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you an Entrega Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...