Question about Washing Machines

Open Question

Intellowasher WD1480RD, No power. Have checked power point and there is power there, but when i plug washer in i get nothing.

Posted by on

  • soph75 Apr 04, 2009

    I have the same model machine with the same power problem. I have been persistant with pressing the power button and randomly after dozens of attemps the machine will respond and run perfectly, sometimes if I hold the button down for 30 secs or more it will respond but not offen. I have checked the power point and its working fine.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG intellowasher 7kg wd-8015c
SURE VINEGER IS VERY GOOD ON CLEANING WASHER

May 02, 2014 | Washing Machines

1 Answer

My whirpool washing machine ghw9250 has no power
Need a bit more info.
Have you checked the power at the power point?
plug a lamp or similar into the power point to check.
Are there any indicator lights showing on the front of the machine?
could be a main board, have come across a whirlpool wfs1273bd with a similar problem yeasterday with a similar issue, pwer to the main board but nothing out.

Jan 02, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a lg intellowasher 7kg wd-8015c (front loader), and its not spinning and the clothes come out wet. whats wrong and what parts will i need please
If the washer is not spinning you need to check on the motor, motor capacitor and the power from the program controller unit. If there is no power to the motor then the controller is a suspect.
Please check this link for tips: removing the motor:

Jun 23, 2012 | Washing Machines

1 Answer

I have an intellowasher made by LG WD1023C I have
This means -Child Lock trying to solve the problem myself- I think by pushing 2 buttons together... but which ones?

Aug 16, 2010 | LG WD-1080FD Front Load Washer

2 Answers

LG Intellowasher 7kg, Model WD-8074FHB - noisy spin cycle
You are right!

Bearings have to be replaced. Replace with the same type and design. All the bearings connected to the washer center shaft has to be replaced at the same time with new set.

Replace the water seals also connected to this. Check the shaft where the bearing sits, for any abrasions or metal damage.

Check the bearing housing also. While carrying out these repairs check the drive belt also. If needed replace it.

If you are happy with the machine outer body and other aspects repair it and re-use it.

Apr 07, 2010 | Washing Machines

1 Answer

Lg intellowasher model wm 1290fhb door will not open. tried waiting 1 hour! tried power on and off, tried child lock
  1. Press the SPIN SPEED and SOIL LEVEL buttons simultaneously.
  2. Press the Power button, while pressing the SPIN SPEED and SOIL LEVEL buttons. Then buzzer will sound twice.
  3. Press the Start/Pause button repeatedly with about 1 second interval until the lamps goes out.
  4. The washer powers off and unlock the door.

Oct 18, 2009 | LG WM-1290FHB Front Load Washer

1 Answer

Washer will fill up and then nothing almost sounds like the timer
I assume the timer is mechanical instead of electronic--try turning the dial slowly through the full cycle positions. You should get motor operation at some points along the dial. If the motor never reacts, look for a circuit breaker button on the motor near it's wiring entry. With the power plug out, try turning the motor shaft to make sure it is not bound up. If the motor does run at points, then probably the clock motor on the timer is bound up.

Aug 02, 2009 | Washing Machines

1 Answer

My LG intellowasher DD WM1480 FDH washer displays DE (door open) and refuses to start, if I repeatedly open and close door sometimes it will start or the door will lock and it still doesnt start.
I have this problem too for my LG Intellowasher. I suspect it is because you're selecting "Rinse Hold" from the options. Try turning the power off and washing again on another setting to see if this resolves the issue.

May 03, 2008 | Washing Machines

2 Answers

Washer will not start
First check youp plug point by plugging in a lamp or something, there could be no supply; next check your washer's plug.

Jan 17, 2008 | Whirlpool LSR6232J Top Load Washer

2 Answers

LG Intellowasher - CL in led code whats wrong?
had this prob too. took me a while to work out. CL is Child Lock... hold down 'Rince' and 'Prewash' buttons at the same time to unlock.

Jun 08, 2007 | LG WM1814CW Front Load Washer

Not finding what you are looking for?

View Most Popular

Washing Machines

Related Question

LG intellowasher 7kg wd-8015c

  • Washing Machines

Open Questions:

0 Answers

I have a Zanussi Spaceplus Orange light has come on this morning?

May 25, 2017 | Zanussi Washing Machines

0 Answers

I have a Zanussi Spaceplus about 3 year old. This morning the orange light is on ?

May 25, 2017 | Zanussi Washing Machines

0 Answers

Why won't my lid close AEG trical Steam

May 25, 2017 | AEG Washing Machines

0 Answers

Why won't my lid close

May 25, 2017 | Washing Machines

Washing Machines Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

LG WM-2277HW Front Load Washer

Whirlpool Cabrio WTW6600SBT Top...

Whirlpool Duet GHW9150P Front...

Whirlpool Duet GHW9150P Front...

Indesit W 123 Front Load Washer

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Brad Brown

Level 3 Expert

15109 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Miele-Washer-Service-Manual-02.pdf....

Miele W1215

PDF Manual
40068302.PDF. user-manual-NTW4600YQ...

Amana NTW4600YQ

PDF Manual
Eurotech man.pdf....

EuroTech EWF272EL-W

Loading...