Question about Televison & Video

1 Answer

PT-53WX54J i can`t open my tv. When i press power i have no signal. And the power ligth flash 3 times...and the light close 4 or 5 sec. and the ligth re-flsh 3 time.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

Thats the error code for the convergence ICs . You will need to replace both convergence ICs they are both STK392-110 you can get replacement ICs at the following link with free installation instructions.
http://servicemanuals.vstore.ca/

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my pt-50lc14 hdtv my screen is stuck on this message, 5v eeprom), 3.3v (gc2), tv-factory mode


Have you tried any of the reset commands?
Try these....please let me know the result:

Method 1
1. Unit power must be ON and unit must be in STOP mode.
2. Press and hold [CH UP] and [CH DOWN] ON THE UNIT for over five seconds. The unit will turn off.
3. Press [DVD POWER] to turn the unit on.

Method 2
1. Press [STOP, TUNE MODE] on the main unit and [>10] on the remote control at the same time for about 3 seconds until the message "Initialized" disappears from the television screen.
2. Turn the unit off and on again.

Method 3
While the unit is off, press and hold [VOLUME +], [OPEN/CLOSE] and [POWER] on the main unit at the same time for more than 5 seconds.

Method 4
While the main unit is on, press [POWER] on the main unit for more than 4 sec. (All the indicators will blink twice when the main unit is reset.)

Another possibility is to unplug the power cord......wait 30 minutes and plug it back in, possibly repeating the steps above. (Method 1 should reset the unit but maybe trying each of them may be necessary until it is reset.

The message appears to be one that displays when the unit is in a setup mode.

Thank you for your reply.

Jan 02, 2014 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Problem with Panasonic PT-53WX54J 53 in. Rear Projection HDTV Television - Green Screen


You may have a component failing in the red drive stage possibly the blue as well or even the quadrature stage. A can of cold shot should help narrow the search considerably. It is also possible the red and blue projection tubes are nearing the end of their service life as well. If you have the means to test the tubes themselves, check the red and blue tubes for gas.

Dec 19, 2011 | Panasonic Televison & Video

1 Answer

I have a Panasonic PT-52LCX66 television that I bought just over 4 years ago. I have replaced the bulb for the second time just 3 months ago and now the set will just shut off after about 3 minutes of...


Tv making and have clicking sounds as tv shutdown as lights flashes?Yes.The board that call the Ballast board might be dying and dead soon.This Ballast board job responsible only are to ingnite the tv projection lamp only.

Jun 30, 2011 | Panasonic PT-52LCX66 Projection Television

2 Answers

I have the PT-53WX54J Panasonic and when I power up I can hear the sound but has a black screen. It went one day quick. What is the problem?


If you can tell me whether the red LED flashes and how many times. I may be able to help.
Thanks
asnowman

Apr 17, 2011 | Panasonic Televison & Video

1 Answer

Panasonic cinema vision pt-53wx54j does not turn on. red power led blinks 3 times.


Hi


Thanks for using FixYa. 3 blinks means convergence output failure and to resolve this you’ll need to change the convergence chips which are located behind the black heat sink; you can see once you open the back off the TV. Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Jun 07, 2010 | Panasonic PT-53X54 53" Rear Projection...

1 Answer

Panasonic projection TV does not turn on.


Power LED flashes orange 1 x 5 secs. = 1 of 3 fans stopped. TEMP LED flashes 1 x 5 secs, = Temperature error. Lamp LED flashes 1 x 5 secs. = lamp ballast error. (check lamp 1st.)
Hope this helps.

Apr 18, 2010 | Televison & Video

1 Answer

Tv will not power up


yellow flashing power light codes: flashes 1 every 5 secs = one of 3 fans not spinning. 2 every 5 secs.= lamp cover open.

5,6,7,8,9,or10 x per 5 secs. are power supply voltage errors.

Apr 10, 2010 | Panasonic PT-50LC13 50" Rear Projection...

2 Answers

Pow lite flashes three times it tries to turn on then shuts down


LED 3 times blinks shows problem with convergence out section in TV and may requires convergence out ICs replacement.
If you are familiar with TV repair and can solder parts on PCB then let me know to provide you more technical info.
Thanks.

Jul 23, 2009 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Panasonic PT-53TWD63, TV will not turn on, Red power light blinks


It is most deffinately a convergence chip issue. The die for no reason. They can be bought online for around $10 dollars and anyone with experience with soldering can replace them pretty easily. I have done it.

Feb 03, 2009 | Panasonic PT-53TWD63 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69804 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6384 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...