Question about Sewing Machines

1 Answer

Fabric Guide How do I install and use the fabric guide that came with my Singer Inspiration 4212? -Kathy

Posted by on

  • knsurlow Sep 15, 2008

    Thank you so much for your assistance! It was greatly appreciated! -Kathy

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Fabric Guide - 154045a.gif
The above is a picture of the fabric guide in use; it slides into top portion of your presser foot shank. It can be used in either direction for guiding uniform stitch lines.
Hope that helps! Happy sewing!

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a hook & timing issue on singer inspiration 4205?


I would over ride the auto setting and trial and error the process by manually turning the tension my self, also it has to do with the fabric too, sometimes whatever fabric is being used tends to regulate the tensioner too, good luck

Sep 01, 2014 | Singer Inspiration 4205 Mechanical Sewing...

1 Answer

Singer sewing machine pulls fabric and snarls


try changing the needle--make sure the needle is the right one for the
fabric being sewed.
rethread the machine using every thread guide
try turning the bobbin the opposite direction
clean under the needle plate and in the bobbin area for lint
you may also have to use a washable stabilizer with the fabric

Apr 15, 2013 | Singer Sewing Machines

1 Answer

Singer 758 breaking needle


Machine breaks needles
1.make sure you are using the right needle for your type of sewing machine.
. There are cases where the machine will only use ones specified in the owners manual.
2.the presser foot may not be installed properly
3.use the correct needle for the type of fabric you are working with. To fine of needle on heavy fabric or to course a needle on silk or jersey can damage fabric.
4.let the feed dogs guide the fabric & the feed dogs will work with the presser foot .
5.the needle is not all the way in -push all the way up against the stop
6. Check top thread tension
7. machine could be out of time & need to be serviced

May 26, 2012 | Singer Sewing Machines

1 Answer

Free motion quilting with the Singer 3343


I don't use a foot - I just gently guide the fabric and create designs.Hope this helps.Jimmy

Mar 28, 2012 | Singer 3343 Mechanical Sewing Machine

1 Answer

Singer Inspiration - needle breaks - needle lowers into hole but edge of hole hits needle before it is raised out of hole - is this a timing problem ? I would appreciate any help asap as I am making a lot...


Machine breaks needles
1.make sure you are using the right needle for your type of sewing machine.
Most machines can use generic Schmetz needles. There are cases where the machine will only use ones specified in the owners manual.
2.the presser foot may not be installed properly
3.use the correct needle for the type of fabric you are working with. To fine of needle on heavy fabric or to course a needle on silk or jersey can damage fabric.
4.let the feed dogs guide the fabric & the feed dogs will work with the presser foot .
5.the needle is not all the way in -push all the way up against the stop

also make sure to use the right tension for what your sewing
also clean under the needle plate & bobbin area for lint or loose threads

if these suggestions don't work & stop the needle breaking then it may be neccessary to have the machine serviced

Sep 14, 2011 | Sewing Machines

1 Answer

How do you replace bulbs for a singer inspiration machine?


Call Singer at 1-800-4singer and they can guide you through it. Joann's fabrics might be able to show you, also.

Sep 13, 2010 | Singer Inspiration 4210 Mechanical Sewing...

1 Answer

Singer 1425-


When my Singer model 1425 wouldn't guide the fabric, the problem was that the gears were worn out. A very nice sewing machine repairman who's now out of business told my husband how to do it and we saved a lot of money!

Sep 15, 2008 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...