Question about PC Desktops
Open your my computer and open the scanner and follow the instruction on the screen
Posted on Sep 01, 2008
Tips for a great answer:
Jul 18, 2015 | E-Machines PC Desktops
Sep 12, 2011 | E-Machines eMachines Desktop PC
Blow the dust from your scanner and printing area with canned air. Clean the scanner bed and the underside of the document lid with a damp, lint-free cloth before scanning.
Get your computer and all-in-one printer turned on and talking to each other. Open the scanning software on your computer if needed. If not, you can use the controls on your printer to run the show.
Lay the picture to be scanned face-down on the glass. Square up the photo using the guides that are usually located along the edges of the scanning bed.
Close the lid.
Go for a higher dpi (dots per inch) count if you plan on displaying the scanned image at larger-than-life size. Otherwise, you can select a lower resolution.
Click the scan button on your computer's scanning software window. Some all-in-one printers need you to press the scan button on the printer itself; check the manual before using.
Get a preview of the scanned image up on your computer monitor. This might happen automatically depending on your software settings; if not, you will have to prompt your computer to display one.
Correct small defects such as red-eye in the image. Save extensive changes for later with dedicated photo-editing software.
Accept the scan and save to your hard drive. Remember to put your picture away
Oct 25, 2010 | HP SMART BUY TOUCHSMART 9100 AIO23IN T6570...
Nov 20, 2009 | Gateway GT4016 Desktop PC
Nov 06, 2009 | PC Desktops
Apr 08, 2009 | PC Desktops
Aug 08, 2008 | PC Desktops
Jul 24, 2008 | PC Desktops
Jun 29, 2008 | PC Desktops
Nov 02, 2007 | CybertronPC XPIDER PCGMRX2500ASV - MDT - 1...
21 people viewed this question
Usually answered in minutes!