Question about Sony Cyber-Shot DSC-F828 Digital Camera

2 Answers

F828 Will Not Power Up

I got my F828 back from Sony last night via UPS. It was sent in for repair of a broken bettery latch (second time for the same repair). This time after being gone one month, it comes back with a "Passed QA" sticker on it. Thanks Sony, the sticker looks very nice. Oh, one small problem... now the camera will not power up. I have tried more than one battery that works in another camera, so that is not an issue. I have also reset the camera using the reset button found under the batter cover door. Any ideas short of sending it back at my own expense for the third time.

Posted by Anonymous on

  • bigrockets Sep 08, 2008

    Yeah my F828 just refused to come on one day. I too tried to reset it to no avail. I tried charging the battery which did no good either. I've been real careful with this camera and have never dropped it or abused it. Any ideas?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 551 Answers

I also had a similar problem, except mine would not power off. It worked fine before I sent to Sony repair for some other warranty work, but when it came back I loaded the battery, shot a few pics and could not turn the thing off! Kind of frustrating walking straight back to the Sony store and send it back the same day. You're right it does take a long time for Sony repairs, but at least the tech was nice enough to phone to discuss the problem. In my case they replaced the system board and ribbon cable and has been working pefectly (knock on wood) for a couple of months.

Posted on Sep 12, 2005

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 551 Answers

Have you tried with the AC power cable?

Posted on Sep 12, 2005

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Apc ups 5k rack option bettery pack sent quotation hai noi ka


You can get the battery pack from the APC WEB site.
Go to this WEB site.
http://www.apc.com/site/apc/index.cfm/ww/?

Aug 03, 2011 | APC Symmetra 5K VA Rack-mountable...

1 Answer

Hello! I'm from Riyadh Saudi Arabia. I've left on my Tripp Lite UPS 1000 just last night. When I came in my office in the morning, my desktop computer including my computer server was OFF. I supprised that...


Unplug the computer. Then run the UPS self-test and the unit will display whether it finds an overload fault, whether the battery needs to be charged or replaced.
Here are the instructions (copied from the User Manual):
Turn UPS on: Press and hold the ON/OFF button for one second.

Run a Self-Test: Press and hold the MUTE/TEST button for two seconds (until alarm beeps several times).

The test will last 10 seconds. All LCD Display icons will be illuminated and the alarm will sound.

If the fault icon remains lit, the battery-supplied outlets are overloaded. Unplug powered devices until you remove the overload.

If the "Replace" icon remains lit and alarm continues to sound, the UPS batteries need to be recharged or replaced. Allow UPS to charge for 24 hours and repeat self-test.

Jul 01, 2010 | Tripp Lite (OMNIVSINT1000) UPS System

1 Answer

Flashing Green Power on light not picture


Last Saturday evening, I experienced the exact same behavior on my Panasonic PT-52LCX65; it shut itself off without warning. I turned it back on, and it shut itself back off after about a minute, and the red "Lamp" LED on the TV began blinking.

I never got any warning message that the lamp was about to go out, but I've just replaced the lamp and now the TV is working just fine. We had to mail-order the new lamp, because neither H. H. Gregg (where I bought the TV on "Black Friday" 3 years ago), Fry's Electronics, nor Best Buy carries the part locally.

My wife found the new bulb WITH its holding apparatus for something like $120 online, roughly half what other sites were charging. We paid roughly $55 for UPS Next Day Air. The first bulb that was sent arrived broken (some UPS rep apparently thought "Fragile" meant "Shake and Drop"), but the company we ordered from cheerfully rushed us another one, and the second one was in much better shape. (Panasonic doesn't pack these replacement bulbs very well; there's a heavy bulb with a lot of air around it that Panasonic doesn't fill.)

More details available if anyone wants 'em. Hope this helps. -- ChuckE

Nov 03, 2008 | Panasonic PT-52LCX65 44" HDTV

1 Answer

Ups repair


First Larn some English (rofl) Then try replacing the batteries,

Oct 11, 2008 | Belkin (F6C1500-TW-RK) (F6C1500TWRK) UPS...

3 Answers

Sony DSC-F828 Faulty Flash


Try resetting the camera. It is next to the battery release. I had a similar issue and posted help. No remedey. So, after praying about this issue, I was lead to power it down and eliminate all the power by taking out the battery push the power button and many others. I found the reset button pushed it and it is all working now. The praying for a solution was key. Praise Jesus. DRD

Aug 08, 2008 | Sony Cyber-Shot DSC-F828 Digital Camera

1 Answer

DSC-F828 The on and off switch keep turning on.


My friend told me to take out the battery for over one hour and put it back and use the reset button if required. It works o.k. now!

Jul 06, 2008 | Sony Cyber-Shot DSC-F828 Digital Camera

3 Answers

Flashing lights


you may have to check the power cord and if that is in place and okay, you will have to check the fuse on the ups. if all that does not work, send it back to the comany for repairs or contact a repair personnel

Sep 01, 2007 | APC Smart-UPS 700INET (SU700INET) UPS...

1 Answer

DSC-F828 Battery Latch


I suspect if you write a cordial note to Sony they just might fix it even though it is a few days out of warranty. I personally have had extremely good service from Sony (Sony Germany that is).

Sep 12, 2005 | Sony Cyber-Shot DSC-F828 Digital Camera

2 Answers

F828-cover open message


Hello, This happens when your CF cover is not well locked (or if there is a problem with the lock sensor ;-)

Sep 12, 2005 | Sony Cyber-Shot DSC-F828 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-F828 Digital Camera Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

james laughton
james laughton

Level 3 Expert

2192 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

27256 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...