Question about Musical Instruments

2 Answers

PEAVEY ECOUSTIC 112 W/ NO SOUND ----muted?

I do not see a master control reset. I have unplugged it and re-plugged it. I opened it yesterday and nothing seems to be loose. There is not a wire going to the pre amp out. I can hear it humm if you turn it up really loud, but nothing when you plug the instrument or any cord into any one of the 3 jacks in front.

Posted by on

  • 2 more comments 
  • rowdi365 Sep 15, 2008

    akai mpc 500

  • JayJay24 Nov 23, 2008

    I have the same problem...my Boss MT-2 is brand new, worked like a charm for a few weeks, then all of a sudden, stopped working...i can hear it distort faintly when i turn up the volume and distortion all the way up, but it is really soft. I think it must be a factory default.



    The pedal bypasses fine. Please let me know if anyone has a solution to this problem. Thanks!

  • Anonymous Dec 05, 2008

    It seems to work, i just have to turn the pedal and my amp up all the way, and its still very faint.

  • Anonymous Mar 26, 2014

    manual

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

TRY TO PUT SOME WD40 TO THE AMP IN JACK IN THE BACK.PUT A JACK IN AND OUT SEVERAL TIMES TO REFORM THE SWITCH INSIDE!THE SIGNAL FROM THE PREAMP DON PASS TO THE AMP!

Posted on Jun 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

Then i'm afraid that your main board has a glitch that you can't repair. take it to a music shop they have the neccessary parts to repair this problem and they have the schematics that will show them which chip is faulty. i'm not sure how long you have had this amp but over time the heat causes the chips or tubes to fail. that is the best answer i can give you at this time anything else would just be a gues and a waste of time. good luck

Posted on Aug 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peavey problems


Numerous possible issues with your description. I would start with the tubes, and check if not one or more has faulted.

Jul 19, 2014 | Peavey Valveking 112 - Tube Guitar...

1 Answer

I have a Peavey MAX 112 Bass Combo amp. When I turn on the amp and have it plugged into the cord and bass, it immediately begins emitting a "whump whump" sound similar to the sound a beating...


The amp is doing what is called "motorboating". This is usually caused when the voltages to sensitive preamp stages are inadequately filtered or regulated and the sudden load of the output stages cause a dip in the voltages sent to the preamps which in turn vary the input to the output stages starting the cycle over. This will require electronic troubleshooting and if your not skilled in that, then it is NOT a DIY fix. What you are seeing is NOT normal, there is a defect.

Apr 22, 2011 | Peavey Electronics Peavey Max 112 Bass...

1 Answer

I'm trying to get a crunchy metal sound from my peavey 112 bandit. What should I set my controls to?


Overdrive is the key to the crunchy metal sound. The only effect on that amp is reverb.
You may want to consider getting an overdrive pedal to get the sound you want.

Mar 02, 2011 | Peavey Bandit 112 Guitar Amplifier With...

1 Answer

When the power switch is turned on the amp just has a loud hum and nothing works not even the little power indicator light..


You have a bad ground probably inside the amp , you need a on hands Tec for this one. I bet its not to serious , about $65.00, is it worth it to ya all tho I don't know your area , but its been my exp.this would be a fair price most any where. good luck DFD

Apr 13, 2009 | Musical Instruments

Not finding what you are looking for?
Musical Instruments Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Musical Instruments Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Are you a Musical Instrument Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...