Question about Projection Televisions

1 Answer

HDTV fades to black while maintaining the sound

Posted by on

  • simonc17 Aug 31, 2008

    It starts to flicker, then fades to a dark green, then all the way black. I have taken the screen off and watched all three bulbs flicker then fade all the way off???????????????


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,794 Answers

You could have a bad av cable or a loose connection on one. Inspect the video cable from the sourse and replace it if necessary.

Posted on Aug 31, 2008

  • Tim Babcock
    Tim Babcock Aug 31, 2008

    That sounds serious. You might want to have a technician look at that.


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Pictu fades to black on my 60-inch 60 Wega for about 1 minute then fades back to full operation

Check the ballast board. This board is connected to the lamp wires and controls the lamp. Check the fan for dust build up too.

Mar 09, 2015 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

It went from fading picture to black screen


Oct 02, 2013 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Tv turns on & off at will picture fades to

the small signal board is usually the cause of that symptom. You can get a replacement signal board from

May 10, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

When i turn on tv, i get a picture for a second or two, then it fades to all blue screen, which lasts a second or two, then it fades to black. also, the stand-by red light flashes.

look for bad solder it sound like you g2 is drop off
if you open the set and have some stand in front of it you tap the board to see if pix come back if it do them you have bad solder you can see the g2 on your pix tube
the g2 will not be lit up at this a g2 pro.

Dec 07, 2009 | Sony KP-57WV600 57" Rear Projection...

1 Answer

R52wh74 fades to one color then dark, then black

I have the same TV and now have the identical problem that you described. Did you ever get it fixed or find out what the problem was? If so, will you please pass the information on?

Aug 08, 2009 | RCA Projection Televisions

1 Answer

The color on the screen is fading in and out and its making a huming sound

Ah this will be your color wheel.. It's time you replace it, unless you want to lose color at all and have a black screen.

Aug 06, 2009 | Toshiba 56HMX195 52" HDTV DLP Projection...

1 Answer

48'' Rear projection picture fading

sounds like your color wheel is fading.

Mar 31, 2009 | JVC Projection Televisions

1 Answer

RCA R52WH74 rear proj 52inch...gets dark and then fades to black

Yes ,your set like so many others is one of RCAs biggest mess i would say if under warranty get to service center fast!!!! other wise you might be one of the lucky ones that only needs power supply broad solder start with Flyback transfomer solder all pins.

May 06, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Fading to black

Get the main voltage box checked inside the set.

Mar 22, 2008 | RCA HDLP50W151 50" Rear Projection HDTV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers


Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides