Files problem Please help? I can't format my File Storage delete or rename any files. My device has already been send to HP for a repair and the problem was not fixed. No hard or soft reset solve this problem. Thank you for your help.

You can delete your voice recording by doing the following.
1.After you have finished recording,
2.touch the button having 3 lines on the screen and choose Send, Rename, Delete, Use as (to use the recording as your ringtone) or Go to my sounds
3.select delete and confirm that you want to delete the file.
Hope this helped you? Please comment for more information and thank you for using fixya.

the messages will be stored in ypur phone memory .. and you will be deleting the files from memory card.. make sure that you delete the files from phone memory... then u can receive messages

The system have used nearly the maximum internal memory available: Storage: Total 33.45 MB; In Use: 32.80 MB; Free: 0.66 MB Program.


If you already deleted or moved to memory card your files, that means that the space is taken by installed application/games, or by files left over by previously installed applications.

Save all your files on computer and do a complete reset of the HTC, restoring system to factory settings.

Sir,
In My HTC P3400i the start menu containt application and setting are removed how to get them back.
Please provide solution.
URGENT.

Solution (on my hx2490 wm5): go into file explorer, and enable view all file in the menu tab, then go into windows directory and find btcoreif file, rename it or delete it, then reboot your pda. and voila! problem solved, sound works fine

For receiving files:
Please ensure after switched on bluetooth, check on 'make devices visible to others'.

For sending out files:
Just like gilbert says, when u have selected the file, don't open it, tap and hold on the filename for maybe 2 seconds, options will come out on the file name, and select 'Beam File'.

Okies?

try to rename it first, then do the soft reset and try again - that should help

1st approach (Quick one!)

1. Soft reset your device
2. make a backup copy of the folder \SD-MMCard\MSMETADATA if exists.
3. delete the folder \SD-MMCard\MSMETADATA.
4. Soft reset your device once again.


2nd approach (Long one!)

If 1st approach did not work, restore the MSMETADATA folder and try the following:

Step Zero: BACKUP
- Make a full backup of your device (including storage cards). If you don't like to do a full backup keep at least a backup of all files and folders we are going to delete as indicated below:

Step One
-In the main device directory delete the file WMPInfo.xml
-Delete the \Application Data\Microsoft\Media Player\ directory and all of
the files in it including the WMDRM folder.
-Delete the \Music folder

Step Two
-Go to your SD card main directory and delete the file WMPInfo.xml
-Delete the folder \SD-MMCard\MSMETADATA
-Delete the folder \SD-MMCard\WMDRM
-Delete the folder \SD-MMCard\Music

Step Three
-Repeat step two for any other storage cards.

Step Four
-Refresh devices in WMP and the storages card should show up in the left tab
and in the sync window you can click "Next Device"

Hope this helps...

When you try to remove certain programs on the PDA the following message may appear and in some cases the program will remain no matter how many times you try to remove it: Due to the nature of the PDA and the fact that the operating system is resident in memory at all times, some .DLL files cannot be stopped and removed. For example, the program below uses a .DLL file to run a program on the Start screen and is therefore always running. The only way around this is to rename the file via Active Sync. In Active Sync on the computer, click on Explore. You may have to wait a short while until Mobile Device is displayed, then follow the program file to where the uninstall file is located, i.e. \Program Files\OmegaOne\BattPack\BatBar.dll. If you try and delete the .DLL file the following message will appear because the file is in use at the time: Select BattBar.dll file and rename this, making sure the file format has the .*** suffix and is different from any other valid format, for example, do not choose .jpeg / .mpeg. In this case we have renamed the file Aaa.aaa. Once the file is renamed and saved, remove the PDA and soft reset. The program linked to the .DLL will no longer be present on the PDA. You can now re-dock the PDA, synchronise and go back to Remove Programs and successfully delete the file.

memory card isn't really memory it's more like a disk drive. it's not like when you add memory to a PC and the new memory is automatically used. To make use of this card you need to transfer some of your larger files to the card.... You can move files from within the ipaq... Click and hold on file. Select Copy Click and hold Select Cut Navigate with File Explorer to the SD card.... Open File Explorer Select My device Now select SD Card You can create a new folder or select an existing folder Click on Edit at bottom of screeen. Select Paste. You can also move files directly from PC to Storage card...... While IPAQ is connected, go to My Computer, then double-click on Mobile Device, then double-click on Pocket PC. Now you will see your Storage Card, and you can use this just like a folder on your PC. You can create folders within it. You can click and drag files to it or to any of it's folders.