Question about Navionics CLASSIC MMC US835L SOUTH FLORIDA

1 Answer

Classic Navionics chip in a Furuno 1833C

I would like to know the level of detail I will receive from a south Florida bahamas Classic chip in a Furuno 1833C unit?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 132 Answers

Gold Navionics is really not bad at all, but by todays standards, lousy. This is a VX1 unit and the classic cartography is frowned upon now, but in the day, this was quite good. So you have to ask, is it worth replacing for cartography alone? Radar and Sonar will plug and play to an 1834C, which is available with C Map or Navionics. Furuno 3D, on the other hand, uses the hyper cool Map Media 3D cartography with sat images and all that, plus other cartography too.

Posted on Jan 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Skycaddie sgx


IF the unit is SECOND HAND ???... it is possible you may not have the correct MAP SET installed ... OR you may have to CHANGE [in MENU] to US MAPS ...
My TOMTOM has a option to choose which COUNTRY maps I wish to use as I have Australia AND all of South-East Asia mapsets loaded separately on my GPS ...

Nov 20, 2013 | GPS

3 Answers

Need to update Furuno 1833C (2002) NavNet mini chip for updating map.


You need to download the firmware, I will see if I find the download online.

Mar 27, 2008 | GPS

1 Answer

Targets are off by about 20 degrees, and we have tried everything on the config menu to try to correct this. What do we do to get targets to be on accurate bearing? Thank you .


You have to be in the "Installation Mode" to adjust the heading. Hold menu key down while pressing the "pwr" key. Then select menu/installation and you'll be able to find the heading adjustment section.

Jun 16, 2010 | Furuno 1833C/NT GPS Receiver

1 Answer

I want to transfer data between my 1650 wf plotter and my compute


Yes and you have to get them from a Furuno dealer as they have to be purchased from Furuno. The cost is about $200. If I can be of assistance email me: kevin@sun-me.net

May 09, 2010 | Furuno 1650wf Gps Fish Finder Combo...

1 Answer

How to interface a furuno 1833c navnet to a usb port and how to download waypoints to my pc.I have the older 9 pin pc cable and a usb adapter cable.Looking for usb drivers and software to make it work.


The display uses a serial interface, otherwise known as a comm port. You can get a USB to DB9 adaptor practically anywhere. Once you have a serial connection, you will need software such as MaxSea to send the waypoint with.

Jan 11, 2010 | Furuno 1833C/NT GPS Receiver

1 Answer

I need a chart card that covers south australia waters to suit a furuno gp1650f.


You need to use the navionics classic charts. Follow this link http://www.navionics.com/Charts_Classic.asp

Dec 23, 2009 | Furuno GP1650F GPS Receiver

1 Answer

When I turn on the unit it will not read the depth only a blue screen and it will not let me switch out of auto mode or run the sounder test?


I know this is an old question but just ran across it. The 1833C/NT is a radar and chart plotter. It requires the external and optional black box sounder to have depth recorder functionality.

Oct 03, 2009 | Furuno 1833C/NT GPS Receiver

1 Answer

Installed chip on hummingbird 787c2 but there's no detailed map


Low detail charts included. You have to buy high detail charts!

Apr 10, 2009 | Navionics: Gold+ Chart Cartridge

1 Answer

Radar install problem


the GP31 has an NMEA in/out in the power cord - out is yellow green in blue(or black) and white on the 1833 you will use data 4 typically which has an in and out also, same colors hook out to in and in to out, program and done

Mar 23, 2009 | Furuno 1833C/NT GPS Receiver

1 Answer

Furuno 1833C/Dgps37 Plotter creeps


Try adjusting the GPS position offset in the GPS Sensor Settings Menu.

Jan 11, 2009 | Furuno 1833C/NT GPS Receiver

Not finding what you are looking for?
Navionics CLASSIC MMC US835L SOUTH FLORIDA Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navionics GPS Experts

yadayada
yadayada

Level 3 Expert

74115 Answers

The Knight
The Knight

Level 3 Expert

73438 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Navionics GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...