Question about LG Studioworks 45 14" CRT Monitor

2 Answers

LG STUDIOWORKS 500g - FULL SCREEN NOT GETTING DISPLAYED

I have a LG STUDIOWORKS 500g monitor. its nearly 5 years old. Now only half the screen is getting displayed. After hitting the monitor gently, the full screen gets displayed.

How this problem can be solved?

Benedict

Posted by on

  • msmjpr Sep 22, 2008

    LG STUDIOWORKS 452v only lower half screen is live upper half black

  • Anonymous Oct 10, 2008

    I have exactly the same problem with my LG Studioworks , its around 5 years old. I have removed the bottom stand of the monitor. Now I have to wait around 10 minutes and then the screen is normal. But any shock or vibation causes the half screen again. Hitting it gently or harshly! (at times) does make it normal again.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have exactly the same problem with my LG Studioworks , its around 5 years old. I have removed the bottom stand of the monitor. Now I have to wait around 10 minutes and then the screen is normal. But any shock or vibration causes the half screen again. Hitting it gently or harshly! (at times) does make it normal again. please advice how can solve this problem

Posted on May 23, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

It's Loose contact Problem in Vertical section

Pl corrected dry points all over the vertical section.

Posted on Oct 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

LG STUDIOWORKS 500G monitor dead ?


your irf 630 is not original purchase it from proper LG authorised service centre it is costly but never become faulty again duplicate mosfet overheats if your green led is on then measure voltage at E.H.T.connect meter at output transister if E.H.T. is producing then meter should show 1 digit if not then 50v will show take care that signal cable should be disconnected if E.H.T. is not producing then check +vcc at horizontal ic it should be 12v. if 12v is not present then check regulator ic 7812 insmps

Mar 14, 2010 | LG 500LC Monitor

1 Answer

Lg 500g monitor blinking in bi-color, no display when powered up


Sir,
there could be two possibilties for that
1 That your serial cable is not working or have broken pin .
&
2 Another is that you monitors picture tube has got damaged or burnt.

Usually it is second reason it can be repaired but is more expencive so i would prefer buying new one.

Nov 08, 2009 | LG Studioworks 563N 15" CRT Monitor

1 Answer

Display problem


The best way is to change the screen.

Mar 01, 2009 | LG Studioworks 570LS 15.1" LCD Monitor

1 Answer

I am unable to make resolution 1024 x 768 in lg model 500G


If the monitor is somewhat old and the monitor hardware doesn't support 1024x768 resolution, installing a new driver won't help. You will have to switch to a better monitor.

Dec 21, 2008 | LG Studioworks 563N 15" CRT Monitor

1 Answer

Not working 1024 by 768 pixels resolution


reduce the number of colors until you can get a resolution that works the monitor cant handle the number of colors and the number of lines of resolution this is a common problem with older monitors.

l8r

Nov 13, 2008 | LG Studioworks 440SI 14" CRT Monitor

4 Answers

My studioworks 500G monitor LED blinking with twise colour(Green and Amber)and no display.


1. LOT problem.

2. Horizontal transistor bad.

3. Dry points in neck board, horizontal section.

4. transformer output capacitors problem.

5. IRF 630 ( lot supply fet )

Nov 03, 2008 | LG Studioworks 45 14" CRT Monitor

1 Answer

Whenever system restart , led blinking, no display


15" Monitor warranty period 1 year from mfd date.

17" Monitor warranty period 3years from mfd date.

Aug 22, 2008 | LG Studioworks 45 14" CRT Monitor

2 Answers

Horizontal and vertical adjustments


Check components related with pots thats adding command ic to pots.If they are ok then change command ic with new one.Before this you can check horizantal hold transistor that is placed on hitsink of eht.small in size and check two small transistor placed near it on pcb.Hope this solution works .If not then i am here

Mar 10, 2008 | LG Studioworks 45 14" CRT Monitor

Not finding what you are looking for?
LG Studioworks 45 14" CRT Monitor Logo

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computer Monitors Experts

Cindy Wells

Level 3 Expert

4754 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Lawrence Oravetz

Level 3 Expert

7565 Answers

Are you a LG Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...