Question about Thermador PDR366ZS Dual Fuel (Electric and Gas) Kitchen Range

Open Question

Frigidaire model cges387cs1 electric range

Oven control beeps and displays f1, what does this mean? can find the meaning of all the codes on the web.

Posted by on

5 Suggested Answers

aborcass
  • 2651 Answers

SOURCE: maytag electric range shows F1 error message and beeps

f1 is a bad range control/ touchpad, here the part number for a white clock for model number MER5770aww 74008106 approx 150 bucks

Posted on Apr 08, 2008

  • 2 Answers

SOURCE: Flashing Lights on Thermador Oven/Range

the lights flashing in a sequence indicates the error code. The error codes indicates what the problem is with your stove. Based on the response to your message, it sounds like their error code is 12, one then two. It is not clear what your error code is.

There is an explanation of the error codes on the wiring diagram that comes with the stove. I found the wiring diagram for my stove taped to the inside of the kick plate. The kick plate had to be removed to find it.

my oven is not working either. the error code I get is 34. I am told by a technician that error code indicates that the computer is not recognizing that the cooling fan is operating, which is why my oven will not work.
When I try and order a new cooling fan from Thermador, the website says that it is temporarily out of stock. Obviously, other people are having the same problem I am.


Posted on Mar 06, 2009

  • 39 Answers

SOURCE: F1 fault code Frigidaire electric range

all solutions on the F1 show to replace the EOC control.

Posted on May 22, 2009

  • 1 Answer

SOURCE: "F1" error code on Magic Chef gas range Model 3488XRA

I'm not sure how to fix this, but my mom's magic chef has been doing this for close to 10 years. She's managed it by plugging a power strip into the wall outlet and plugging the stove into the power strip. Then she can just turn on the strip when she needs to use the oven. It only requires moving the unit once, and is easy for the technological/ home repair novice.

Posted on Aug 11, 2009

gripfitter
  • 557 Answers

SOURCE: Thermador dual fuel range like above

F1 Internal logic failure (monitoring function). Sounds alarm and inhibits cook modes Replace the electronic range control (also called clock or E)

Taken from thermador repair manual.

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put my Frigidaire Electrolux oven in cleaning mode an hour ago. It is now beeping non stop with "F1 Err" on the screen. Nothing I push seems to work


The F1 code indicates a control failure. Try pressing a key to see if it displays on the screen. If not, the keypad may have shorted and requires replacement.

If the keypad is fine, there is perhaps a problem with the internal checksum; disconnect the power for 30 seconds and reconnect it. If the code remains, you must replace the electronic oven control (EOC).
- If the F1 code appears when the oven is running, it means that the oven senses an overheating condition. Use an external thermometer to check the temperature inside the oven.
- If it is accurate, it means that either the temperature sensor probe or the control relay has malfunctioned. Disconnect the power, and inspect the sensor probe, replacing it if necessary.
- If the oven is actually overheating, replace the EOC.
- If the oven is allowed to overheat, the resulting damage is possibly so extensive that the entire oven may require replacement.
Visit THIS LINK for additional detail

Jul 19, 2011 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Code F1 and F3


F1 means there is a problem with the control board. F3 implies an issue with the temperature sensors. In your case, having the controller rebuilt or replacing it should fix both of your problems. These can be rebuilt quickly and reliable at a fraction of the cost of buying new. www.fixyourboard.com

May 21, 2010 | Frigidaire PLEF398AC Electric Kitchen...

1 Answer

Frigidaire Stove beeping F1,How do repair this?


The f1 code means that the EOC (Electronic Oven Control) failed. You need to replace the EOC board.

Good Luck And Please rate

Sep 10, 2009 | Frigidaire FES367 Electric Kitchen Range

1 Answer

"F1" DISPLAYED AND BEEPING


F1-->Failed Thermistor Control Replace ERC
you will have to replace the ERC or Electronic Range Control or the touch pad.

Dec 18, 2008 | Ovens

1 Answer

My kenmore oven is beeping and will not stop. the display shows F-1.


Please use the chart to determine which stove you have. You will have to look at the model number. The first 3 numbers will be the series on the chart. In most cases an F1 error would require replacment of the electronic control. This part is commonly refered to as an EOC or ERC. However this type of repair is usually reserved for repair specialists.

KENMORE Range/Stove/Oven Fault Codes – 362 Series (General Electric)
F1 = Stuck Touch Pad Key - Replace Electronic Range Control (ERC).

KENMORE - 911 Series (General Electric/Roper)
F0-F1-FF = Failed transistor in Electronic Range Control (ERC).

KENMORE Range/Stove/Oven Fault Codes- 665 Series (Whirlpool)
F1-E0 EPROM Error - Electronic Range Control (ERC).
F1-E1 EPROM Error - Electronic Range Control (ERC).
F1-E2 U/L ERC Errors - Electronic Range Control (ERC).
F1-E3 Fuel Type Fail

Kill power 30 seconds-Cancel-Start/Enter-5 seconds-Should see “E” for electric-
“9” for gas-If code changes again-replace Electronic Range Control (ERC).

KENMORE - 790 Series Electronic Oven Control (Frigidaire)
F1 = Shorted Touch Pad = Electronic Range Control (EOC) Internal checksum error.
Runaway Temp = Replace Electronic Oven Control (EOC).

Kill power 30 seconds - if error returns - replace Electronic Oven Control (EOC).

Dec 16, 2008 | Ovens

1 Answer

Frigidaire during cleaning F1 error,


F1 means its your electronic control and it will probably cost you the same amount to get this problem fixed again. The part is usually $350 plus.

Nov 24, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Stove beeping


You have a fault in the range electrical system

FRIGIDAIRE

Range/Stove/Oven Fault Codes Version 3 Failure
Code
Condition Check/Repair F0 & F1 EOC (Electronic Oven Control) failure Replace EOC (Electronic Oven Control)





Jun 04, 2008 | Frigidaire FEF376 Electric Kitchen Range

2 Answers

Fault Code F1


Frigidaire oven fault code F1 means the electronic clock control is bad and should be replaced. That is the electronic control board that shows your clock display and is also called clock or eoc, depending on your model.

Mar 25, 2008 | Frigidaire (FEB30S7D) Oven

1 Answer

Oven range not working, oven control beeps and displays -F1-


this model is ether a verson 2,3 or 4 the code for version 2and 3 is: F0 & F1 EOC (Electronic Oven Control) failure Replace verson 4 is;
F1 Circuit board defective Replace control board

Dec 22, 2007 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

What does "F1" mean? The oven is out!


I think f1 is a problem with the oven control board. Look on the back of the oven for a tech sheet and it will tell you what the codes mean and what to check.

Sep 24, 2007 | Crosley CE35111AA Electric Kitchen Range

Not finding what you are looking for?
Thermador PDR366ZS Dual Fuel (Electric and Gas) Kitchen Range Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thermador Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

71043 Answers

butch welch

Level 2 Expert

147 Answers

Are you a Thermador Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...