Question about NEC Computers & Internet

2 Answers

My nec lcd2080ux monitor had a great screen one day and a blank screen the next. What would be the reason for this? Thanks

Posted by on

  • dllaba Sep 01, 2008

    I not only checked the connection but installed a dvi cable just in case the original wire was faulty but no change. Any other ideas?

    Thanks

×

2 Answers

When the input is disconnected from the computer there is a 'no signal window' that appears on the monitor. It is clear and crisp suggesting the screen is still operational but the signal from the computer is not getting through or is not being translated into a screen image. When the computer is on the green light is active suggesting a sent signal and the light turns amber when the computer signal is off.
Any suggestions?
Thanks

Posted on Sep 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 152 Answers

You may have loosened the monitor cable. Just unscrew it and insert firmly again.

Posted on Sep 01, 2008

  • Patrick Regoniel
    Patrick Regoniel Sep 02, 2008

    A totally blank screen means that there is no power coming in. If the power cable is new, a broken cable should not be an issue. Check if the fuse is busted (if this is accessible) and replace it. The power source should also be checked. Some outlets lose power when the circuit breaker cuts off the electricity due to a power surge.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My NEC Multisync LCD 2080ux + has developed a weak display which makes text harder to read. I have adjusted the ATI Radion 9600 graphics card with no success. Any ideas?


One thing that will affect how clear the display is if the monitors resolution is set to the wrong value. your monitor must be set at at its native resolution of 1600x1200. Any other value will result in a degraded display.

Nov 05, 2009 | NEC LCD2080UX (Black) 20.10" LCD Monitor

1 Answer

Lg w1934-bn blank screen after start up, power light on . same problem occurs on different computers used.


Reason 1: Wetness The number one reason why computer monitors go blank is - wetness. Believe it or not, when your computer monitor is exposed to humid air, sometimes water can condense and accumulate in the monitor. This causes the monitor to malfunction and go blank. I've had this happen to my desktop PC at least three times before. What you need to do is to leave the monitor alone for some time and allow the water to evaporate. That usually solves the problem.

Reason 2: Faulty Graphics Card The next reason why your computer monitor goes black is due to a faulty graphics card. The best way to detect this kind of problem is to connect up a new monitor to your PC, then check if you have a blank screen. If you continue to have a blank screen, then it's likely your video card is faulty.

Reason 3: Faulty RAM This one is less obvious and less common, but it can happen. You might sometimes get bad RAM modules which prevent your PC from booting up even to the basic BIOS startup screen. To detect this kind of problem is more troublesome, you might need to remove those RAM modules and insert them into another computer.

Reason 4: Loose Connections Another reason why your monitor goes blank is due to loose connections. The connection from the monitor to the mains is usually a culprit, as is the connection between the monitor and the video card. Check those connections before you declare your computer monitor as faulty.

Reason 5: A Short Circuit In The Motherboard And the final reason why your computer monitor goes blank? It's possibly because of a short circuit in the motherboard. This is the most undesirable outcome of course, as you might have to replace your entire motherboard. However, it's possible that this can happen - so keep your fingers crossed and hope it doesn't happen to you.
i think this will help.
please rate my solution.
have a nice day.

Jul 05, 2009 | ViewSonic 17" 1280x1024 TFT-LCD/ Speaker...

3 Answers

My monitor went black, and the power switch just flashes.


is your CPU working properly? if that the case, your monitor is in need of a service.
reasons for why a monitor goes blank?
Reason 1: Wetness
The number one reason why computer monitors go blank is - wetness. Believe it or not, when your computer monitor is exposed to humid air, sometimes water can condense and accumulate in the monitor. This causes the monitor to malfunction and go blank. I've had this happen to my desktop PC at least three times before. What you need to do is to leave the monitor alone for some time and allow the water to evaporate. That usually solves the problem.

Reason 2: Faulty Graphics Card
The next reason why your computer monitor goes black is due to a faulty graphics card. The best way to detect this kind of problem is to connect up a new monitor to your PC, then check if you have a blank screen. If you continue to have a blank screen, then it's likely your video card is faulty.

Reason 3: Faulty RAM
This one is less obvious and less common, but it can happen. You might sometimes get bad RAM modules which prevent your PC from booting up even to the basic BIOS startup screen. To detect this kind of problem is more troublesome, you might need to remove those RAM modules and insert them into another computer.

Reason 4: Loose Connections
Another reason why your monitor goes blank is due to loose connections. The connection from the monitor to the mains is usually a culprit, as is the connection between the monitor and the video card. Check those connections before you declare your computer monitor as faulty.

Reason 5: A Short Circuit In The Motherboard
And the final reason why your computer monitor goes blank? It's possibly because of a short circuit in the motherboard. This is the most undesirable outcome of course, as you might have to replace your entire motherboard. However, it's possible that this can happen - so keep your fingers crossed and hope it doesn't happen to you.
try this.
please rate my solution.
have a nice day.

Jul 05, 2009 | Dell E152FP 15" Flat Panel LCD Monitor

1 Answer

My monitor AOC 912Sw-4 does not turn on. Power button`s led is flashing all the time.At the beginning I waited some minutes and I could use it normally, but right now it is impossible see any image on it.


only choice is to give the monitor for service.
anyway read this, this help you.
is your CPU working properly? if that the case, your monitor is in need of a service.
reasons for why a monitor goes blank?
Reason 1: Wetness
The number one reason why computer monitors go blank is - wetness. Believe it or not, when your computer monitor is exposed to humid air, sometimes water can condense and accumulate in the monitor. This causes the monitor to malfunction and go blank. I've had this happen to my desktop PC at least three times before. What you need to do is to leave the monitor alone for some time and allow the water to evaporate. That usually solves the problem.

Reason 2: Faulty Graphics Card
The next reason why your computer monitor goes black is due to a faulty graphics card. The best way to detect this kind of problem is to connect up a new monitor to your PC, then check if you have a blank screen. If you continue to have a blank screen, then it's likely your video card is faulty.

Reason 3: Faulty RAM
This one is less obvious and less common, but it can happen. You might sometimes get bad RAM modules which prevent your PC from booting up even to the basic BIOS startup screen. To detect this kind of problem is more troublesome, you might need to remove those RAM modules and insert them into another computer.

Reason 4: Loose Connections
Another reason why your monitor goes blank is due to loose connections. The connection from the monitor to the mains is usually a culprit, as is the connection between the monitor and the video card. Check those connections before you declare your computer monitor as faulty.

Reason 5: A Short Circuit In The Motherboard
And the final reason why your computer monitor goes blank? It's possibly because of a short circuit in the motherboard. This is the most undesirable outcome of course, as you might have to replace your entire motherboard. However, it's possible that this can happen - so keep your fingers crossed and hope it doesn't happen to you.
try this.
please rate my solution.
have a nice day.

Jul 05, 2009 | AOC 912SW-4 Monitor

1 Answer

Monitor is just not turning on


is your CPU working properly?
if that the case, your monitor is in need of a service.
anyway read this.
this may help you.
reasons for why a monitor not turning on?
Reason 1: Wetness
The number one reason why computer monitors go blank is - wetness. Believe it or not, when your computer monitor is exposed to humid air, sometimes water can condense and accumulate in the monitor. This causes the monitor to malfunction and go blank. I've had this happen to my desktop PC at least three times before. What you need to do is to leave the monitor alone for some time and allow the water to evaporate. That usually solves the problem.

Reason 2: Faulty Graphics Card
The next reason why your computer monitor goes black is due to a faulty graphics card. The best way to detect this kind of problem is to connect up a new monitor to your PC, then check if you have a blank screen. If you continue to have a blank screen, then it's likely your video card is faulty.

Reason 3: Faulty RAM
This one is less obvious and less common, but it can happen. You might sometimes get bad RAM modules which prevent your PC from booting up even to the basic BIOS startup screen. To detect this kind of problem is more troublesome, you might need to remove those RAM modules and insert them into another computer.

Reason 4: Loose Connections
Another reason why your monitor goes blank is due to loose connections. The connection from the monitor to the mains is usually a culprit, as is the connection between the monitor and the video card. Check those connections before you declare your computer monitor as faulty.

Reason 5: A Short Circuit In The Motherboard
And the final reason why your computer monitor goes blank? It's possibly because of a short circuit in the motherboard. This is the most undesirable outcome of course, as you might have to replace your entire motherboard. However, it's possible that this can happen - so keep your fingers crossed and hope it doesn't happen to you.
try this.
please rate my solution.
have a nice day.

Jul 04, 2009 | Computers & Internet

1 Answer

Screen goes blank after a few seconds


Hi ,
The monitor flicker problem. The monitor when turn on will display image for couple of second then turn black. The monitor status led is still green. This will happen each time it is turn on. The symptom at appear to come from the inverter board.

May 08, 2009 | NEC-Mitsubishi NEC Display Solutions...

1 Answer

Looking for service manual for NEC MultiSync LCD2080UX+BK Model:L202EV


GO TO MANUFACTERS SITE AND CHECK THERE , YOU CAN USUALLY DOWNLOAD A COPY IN PDF FILE FORMAT . ALSO IF YOU HAVE THE DISK IT ORIGINALLY CAME WITH A COPY OF IT SHOULD BE ON IT .

May 07, 2009 | Computers & Internet

1 Answer

My MultiSync LCD1810 Monitor stays on only for only 1 Second.


The Capacitor on the Inverter Circuit Board has gone bad and needs to be replaced. That's it.

Feb 17, 2009 | NEC MultiSync LCD1810X 18.1" LCD Monitor

1 Answer

NEC fs 5197 tv blank screen


I cannot assist but do you please have an owners manual for the FS 5197. I'm not sure if its against this sites "rules" but little fingers have tuned the menu's instructions into Arabic. Contact me directly at factotum.inter.alia@gmail.com. Thanks

Feb 10, 2008 | NEC-Mitsubishi AccuSync LCD72V 17" LCD...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...