Question about NetGear DG834G Router
I have had a dodgy internet connnecion for about a month, the internet light keeps flashing orange (very annoying when you're in the middle of something important!)I have changed the filters, unplugged the phones and tried it, moved the router into the main phone line and no better. I have contacted my isp and they have apparently tested the line and say its fine, they advised me to speak to the modem manufacturer and reconfigure it. What d'you think? many thanks
Hi, tthe advice is ok,but be sure you have all the relevant info to hand RE:your modem/router .
Posted on Oct 29, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 13, 2013 | D-Link DIR-615 Wireless Router
Mar 02, 2011 | Belkin Wireless Surf Router (F7D2301)
Feb 18, 2011 | Belkin N Wireless Modem-Router F5D8633au4A
SecureEasySetup (Orange/White) The Cisco logo is the Router's SecureEasySetup button. It
lights up and will stay orange when the Router is powered on. The color orange indicates that
the Router is not using the SecureEasySetup feature, while the color white indicates that the
Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup
mode, the Cisco logo will turn white and start flashing. After the Router has generated
the SSID and WPA Personal key, the Cisco logo will stop flashing and stay white.
To clear the SSID and WPA Personal key, press and hold down the Cisco logo for five seconds.
The Cisco logo will flash slowly as the Router resets itself. The Cisco logo will turn orange to
indicate a successful reset.NOTE: SecureEasySetup is a feature that makes
it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router's
Setup Wizard CD-ROM and follow the onscreen instructions to use SecureEasySetup.
Power (Green) The Power LED lights up and will stay on while the Router is powered
on. When the Router goes through its selfdiagnostic mode during every boot-up, this
LED will flash. When the diagnostic is complete, the LED will be solidly lit.
DMZ (Green) The DMZ LED indicates when the DMZ function is being used. This LED will
remain lit as long as DMZ is enabled. WLAN (Green) The WLAN LED lights up when
the wireless feature is enabled. If the LED is flashing, the Router is actively sending or
receiving data over the network. 1, 2, 3, 4 (Green) These numbered LEDs, corresponding with the numbered ports on the Router's back panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected to a device through that port. A flashing LED indicates network activity over that port.
Internet (Green) The Internet LED lights up when there is a connection made through the
Internet port. A flashing LED indicates network activity over the Internet port.
Nov 26, 2010 | Computers & Internet
Aug 30, 2010 | NetGear WGR614 Router
Jan 19, 2010 | Belkin Computers & Internet
Mar 10, 2009 | Belkin N Wireless Modem-Router F5D8633au4A
May 31, 2008 | NetGear DG834G Router
1,035 people viewed this question
Usually answered in minutes!