An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 10,000 points.
Re: not turn on
It is possible that the battery terminals of the camera are not giving enough pressure/contact to the batteries. Additionally, you may want to clean/scrape these terminals (prongs). In some instances, bending them (or stretching if spring type) may help to provide more pressure/contact to the battery.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The battery does not affect the picture quality. The recharageable battery may affect the auto focus if the battery is low, recharging the battery should fix this problem. Otherwise the camera needs a service.
I would hesitate to disagree with Canon service, but you may want to try replacing the date/time battery. It's a small "button" battery (CR2016) that is supposed to provide power so that the camera 'remembers' the date, time, and other settings when the main battery is removed.
It is located in a holder that slides out of the camera, right next to where the main battery is located. It's worth a try.
Okay, this is simple. Your camera can take several pictures at one time in a burst. However when you release the shutter button your processor takes a second to actually SAVE the pictures to the card in the camera. One thing than has helped me in my wedding photography business is to buy the fastest speed cards I can find. It significantly reduced my "busy" time.
Same problem. Fully charged main battery. In my case, I hadn't used the camera in over 6 months. All I did was pull the main battery and then pulled the small CR 2016 button cell battery located inside the main battery compartment and re-inserted both batteries. The camera made a quiet click and then turned on with the main power switch and asked to reset the date and time. Works fine now. If this doesn't work just purchase a new button cell.