-   ports just won't open - have done everything.
randomly before i went to bed last night, i checked onutorrent and the ports were open, so i thought it had magically sorted itself, turned pc on today, still slow, ports closed -.-
-   Guest
Feb 24, 2009
-   i have the same problem, i went to the router's page (192.168.1.254 i think) and fixded it from there...or i thought i did, it still says in utorrent for example that the port is closed....i dont know what else to do...
-   dds88
-   i have this problem but it was not like this befor but it is now :-( i called my isp for 50 mins but still no good but i wont give up my model is tg585v7-   Guest
Jan 17, 2009
-   i don't know how to open ports in router thomson tg585v7
-   Guest
You need to log on to the router using the default gateway.
Go to Start menu -> Accessories -> Command Prompt
type ipconfig
Note the default gateway
open your browser, in the address bar type in the default gateway ip address - like 192.168.1.254 --- or whatever the IP is.
That should open your router config pages... if it asks you for a user name and password... default usernames depend on your ISP usually, but try for the username Admin, admin, Administrator, administrator and for the password try the same as the username or leave blank... If you have no luck contact your ISP for logging on details.
A web page will open - go to
Toolbox
Game And Application Sharing
At top right click configure
Make sure UPnP and Extended Security are selected if you have those options
Then at the bottom
Create a New Game or Application
from there you just need to select which protocols you need to work with or select ANY
Enter the port you want opened
and add the same port number to the destination / trigger port.
That should be you. If not you need to telnet into you router
Telnet <default gateway IP>
and type Menu
The follow the previous instructions.
hey! the same problem with me too. I have tg585v7 and i cant open port 24785 for utorrent. I have tried to open it by the adress portforward with a program pcconfig, but still is closed! Could you please tell me if there is anything i could do? thanks a lot
My genisys OTC opens the first window and then turns blue and does nothing.. I have reformated the...
(More)
My genisys OTC opens the first window and then turns blue and does nothing.. I have reformated the memory card and re updated it. now it will not even shut down without unpluging all power