Wht's the reset code of 350 - Konica Minolta bizhub 350 All-In-One Laser Printer

Fusing unit failure the hot part of the machine has a problem. Was the fusing unit replaced or worked on recently, there is a connector near the front of the fuser mite want to check to ensure it is properly plugged in have to remove the front cover of the fuser to see it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Try Putty and a 9pin male to RJ45 RS232 serial console cable.
the instructions are in the link provided here:

http://wirelesslanprofessionals.com/wp-content/uploads/2010/01/Password-Recovery-on-Cisco-APs.pdf

I’m happy to help further over the phone at https://www.6ya.com/expert/matt_7e951e081251ffbc

How should i reset phone code of Lava A 16

Try Raising the antenna and then press the reset button when the unit is on,this should restore the garmin, then:
I would try updating the unit by connecting to to a usb port on your computer and then downloading Garmin Communicator. If that does not help then try contacting Garmin. I will attach a link to Garmin customer support. thanks for using FixYa

http://www.garmin.com/garmin/cms/site/us/support/supportcontact

ANT org/wht, LR spkr brn/blk, LF spk blu/blk, RF spk blk/wht, RR spk grn/blk, ILL blk/wht, ACC gry/wht, GRND blk, LF spk brn/wht, RF spk brn, RR spk grn/wht, ILL grn/wht, MEM power org/blk.

Hello
press utility/counter - then under the counter "details" - stop 0 0 stop 01 - now you are in service mode, - stop 0 C, and there shold be admin pwd

i have konica minotla bc352 its giving error c 2553 and megenta background
pl help me

Error code C0520 on Konica Minolta biz hub c-350??