Question about Belkin (F5D7230-4) Router (587009)

1 Answer

Configuration I need ports open in order to complete my installation on my phone jack (Magicjack).

Posted by on

  • 2 more comments 
  • Kats7 Aug 31, 2008

    What is the solution?

  • Kats7 Aug 31, 2008

    How do I open 5060 an 5070 ports so I can use my magicJack phone jack?

  • smailio Sep 04, 2008

    please i want to know the configuration of belkin reapearter 2.4GHZ 802.11G.someone help me

  • Bill Steinhart Jan 18, 2009

    I have a 2wire -2701 router and recently got an error message 3 when Majic Jack was loading (had previosly worked fine). Message help says to open ports 5060 and 5070 in the firewall. How do I open these ports?


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 210 Answers

Some routers will have a firewall area that you need to allow those ports to traverse through it. Others will just require a new NAT entry.

If everything is working fine as it is, then it's more than likely a case of finding the "NAT" (Network Address Translation) area, or even the "DMZ" (De-Militarized Zone) area and then adding those ports in.

If a firewall is present on the device, you may need to specifically allow those ports through also. As for the specifics of where to find these options, I don't know your particular router, but it's a matter of clicking around the various menus's and tabs until you find it. (and they'll be labelled something similar to what I mentioned above).

p.s: Enter the ports as you did in your last post. "5060" and "5070" (which I believe are SIP ports)

Posted on Aug 31, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Which wires on the Cat5 are connected to the WAN Port

Cat 5 is a cable configuration standard that uses a plug and jack that is similar to a modular phone jack called rj45. Those cables plug into multiple points on the router. If you have a separate cable modem, the cat 5 cable from the modem connects to the WAN port on the router.

Mar 08, 2016 | Routers

1 Answer

Magic jack customer service

I share a links please visit and read it.
magicJack Support, magicJack Live Chat


Sep 02, 2014 | Routers

1 Answer

Plug magicjack usb

If you have a magic jack + your best to connect via Ethernet , the reason for this is because you don`t have the delay a computer imposes. the reason your device dos not work on your routers usb port is the port dos not have the driver software or the operating program magic jack uses to interface with a computer and there is no way to to load it up on your router.

It will not work for you, the usb connection is for comunity access to a had drive on your network only ,,,as far as i know.

Oct 12, 2013 | TP-LINK Routers

1 Answer

How can i install a magicjack?

Magic Jack is a plug and play device, just plug the USB to the jack and to your phone, and your computer will instantly recognize the hardware connected to it.

Sometimes, it does take a bit of time for the computer to recognize the hardware, so be patient! It'll take about 1-2 minutes for it to fully recognize and load, and you'll be up and running making calls in no time!

Jun 30, 2011 | Routers

2 Answers


hi there, i have a magic jack and i'd like to use the voicemail the recorded voice is asking me for a mailbox assigned in my system, i'm usinf window vista and i dont know where to get a mailbox number please help!!!

Mar 03, 2011 | NetGear DG834G Router

1 Answer

Need 2 open NAT

If you have a firewall or network hardware, such as a router, you might need to make a configuration change in order for your Xbox 360 console to communicate with Xbox LIVE. This configuration change is sometimes called "opening ports" or "port forwarding."

Xbox LIVE requires the following ports to be open:  
  • Port 88 (UDP)
  • Port 3074 (UDP and TCP)
  • Port 53 (UDP and TCP)
  • Port 80 (TCP)
For Belkin router follow this steps

Configuring port forwarding

In order to configure this, you need to know: 

- The IP address of the computer or device to have the port forwarded to.

- The port numbers to be used and whether these are TCP or UDP ports

(Note: We recommend you use a computer that has a wired connection to the router.)

Setup steps:

  1. Open a Web Browser on the computer. Type in
  2. In the address bar of the Web Browser type Click Login in the upper right hand corner of the page. The router does not ship with a password, so just click submit.


  1. Click on Virtual Servers under Firewall in the menu on the left


  1. Enter the following information
    • Disable Firwall

    • Type the port(s) specified by the program manufacture for both of the Inbound port fields
    • Select TCP, UDP, or BOTH for the Type.
    • Private IP address: Enter the IP address of the computer you want grant access too.
    • Type the port(s) specified by the program manufacture for both of the Private port fields.


  1. Click the Apply Changes button

Jan 10, 2011 | Belkin (F5D8231-4) Wireless Router...

1 Answer

I have a Magic jack internet phone well my router firewall seems to be blocking it how can i exclude it from the firewall in my router?

MagicJack uses port 5060 & 5070 UDP. so go into your router and select port forwarding or applications something along those lines and insert the correct ports into the configuration. it should be pretty self explanatory. i'm not familiar with this particular model of router. if you need instructions they can be found here:
if however your ISP is blocking the use of magic jack there isn't alot you can do about it

Dec 31, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

Router problems

Please answer the following questions --

Is this a new router installation?
IF so -
  • Who is your internet service provider?
  • If they are Cable TV based your wan side router configuration might be correct.
  • If they are Telco (phone line) based your wan side router configuration probably needs to be updated.
How is the connection wired
  • Starting with the cable tv coax or a phone wire plugged into a phone jack
  • Does this connect to a box provided by your service provider? (probably a modem/whatever box)
  • Does an ethernet cable (looks like a fat phone wire with wide connectors on the end ( 8 metal connection points) -- connect the modem to a single port not in a group on your router?
  • Does another ethernet cable connect one if the block of four ports to your computer?
If so you appear to be wired correctly
If not explain to be in the same order preferably how your equipment is wired.
After you reply I will provide additional steps.

Jan 02, 2008 | D-Link DI-624 Air Plus XtremeG Wireless...

1 Answer

Actiontec gt701-wg Installation

You can use USB instead of Ethernet port but its not a common practise. Leave it empty then.

Dec 03, 2007 | Actiontec GT701WG Router (actiongt701wg)

1 Answer

Configure the firewall

You can use the Virtual Server to forward an individual port to one of your computers. You cannot forward the same port to multiple computers. In order to configure the Virtual Server you need to know the IP address of the computer that needs the port opened and the service port number. The links below will help you find the IP address of your machine. If you don?t know which port needs to be opened, try checking the software manufacture?s support website for information on use behind firewall. Configuring the Virtual Server: Step 1 Access the device configuration by entering in your web browser. Login with your username and password. The default username is admin and the password is blank. Step 2a If the port you need to forward is a common port, it will be under the predefined virtual server list at the bottom of the page. Click the pad and paper icon next to the virtual server entry you want to use. The Protocol Type and Service Port fields are preconfigured. Click the Enable radio button to use the virtual server. Enter the private IP address of the computer that will use the service port. Configure the Schedule as needed, then Apply your settings. Step 2b If the port you need to forward is not listed under the predefined virtual server list at the bottom of the page, you can create a new entry for your application. Click the Enable radio button to use the virtual server. Give your virtual server a name. Next, enter the private IP address of the computer that will use the service port. Then, select the Protocol Type and enter the Service Port. If you don?t know how to use Private and Public port assignment, then just enter the same port number in both fields. Configure the Schedule as needed and Apply your settings.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides