Question about Lexmark X1290 All-In-One InkJet Printer

1 Answer

Wont Print When I turn it on the power button light flashes and it wont print can any on help?

Posted by on

  • 1 more comment 
  • Jiiuneis Peuloperto Aug 31, 2008

    i have the X1270, but i think its the same.
    my printer will mark streak marks when i run a blank paper using the paper feed button. how do i clean this?


  • maxwelll Oct 13, 2008

    I am using an Acer Machine with Vister installed. Message says: "lxczpswx.exe" is missing. Download points to "cjr1200EN" but still does not work. Device driver says "Driver is working". However, printer does not print. The all-in-one features are also not insalled. Program software reads: "Lexmark Prinier" and "uninstall Printer".

  • Anonymous Nov 22, 2008

    same

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

It has a paper jam. just press the paper feed button.


Posted on Aug 31, 2008

  • Randy Villalobos
    Randy Villalobos Aug 31, 2008

    hold a paper half way through the tray when you press the paper feed button. hold it there until it stops by itself. now, take out the paper and run another clean paper to see if its clean. if so, you're done. if not, you need a paper feeder roll cleaner. its a paper with a sticky surface. just run it through and it will clean the rolls.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hl1440 drum indicator flashing


ok turn it off take the toner out clean all the terminals put them back in make sure everything is closed properly turn the machinie back on and let me no what happenes then

Sep 12, 2008 | Brother DR-400 Replacement Drum - 20000...

1 Answer

Flashing green start button konica minolta bizhub 250 and wont print


what doe the screen say????????????????? open close front door power completely off and on

Apr 01, 2014 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Lp2844 wont print, just added a new roll and continusly feeds through without stopping till i disconnect the power?


Hi,
  • Turn the printer off.
  • Remove the roll and re-fix it.
  • Press and hold the green power button.
  • Turn the printer on and release button after the first flash of LED light.
  • The printer runs a self test print.
  • Turn it off and then on again.
  • Now you can print.
Thanks!

Oct 04, 2011 | Zebra LP 2844 Thermal Printer

2 Answers

How to stop printer from printing an extra sticker when it prints?


Hi
  • Turn the printer off.
  • Press and hold the green power button and turn on the printer.
  • Release after first flash of led light.The printer will run a test print.
  • Turn it off and then on again.
  • Now print!
Hope it helps.Thanks!

Oct 03, 2011 | Zebra LP 2844 Thermal Printer

1 Answer

Flashing red light wont print last cou[ple of days printing black lines every now and then and now wont print tried putting new roll in still wont work


Autosence your printer by turning it off and then hold down the feed button while turning it on and release feed button when light flashes red.

May 15, 2010 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

ALARM light flashing, wont let me print.


hold down stop/reset button for 7 sec. If that doesn't work try holding it down for 14 sec.

Dec 10, 2009 | Canon PIXMA MP530 All-In-One InkJet...

2 Answers

Hp d1460 wont print test page,wont print from wordpad in windows xp home


1.Turn the printer on
2.Press and Hold down the Power Button.
3. While Holding Down the Power Button, open and Shut the lid of the printer four times.
4.Release the Power button. The self-test prints.

Nov 18, 2009 | HP DeskJet D1460 InkJet Printer

1 Answer

Canon Pixma iP2000 wont print black ink?


Canon IP 2000 / reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Jun 02, 2009 | Canon PIXMA iP2000 InkJet Printer

1 Answer

The red light on my epson printer wont turn off and it wont print,ive changed both ink cartridges and still no change.


Hi

Which button has the red light or which LED light? Is it flashing or steady red light? turn it off and check for any obstruction and double check if you installed ink cartridges properly.

Hope this helps

May 13, 2009 | Epson Stylus C40UX InkJet Printer

Not finding what you are looking for?
Lexmark X1290 All-In-One InkJet Printer Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...