Delta ShopMaster JT160

Here is a link that should have it. Good luck

http://www.manualsonline.com/support/delta

http://www.manualslib.com/manual/49025/Delta-36-075.html

let us know if we can help!

It might seem obvious, and no doubt you've long since resolved this question, but was it possibly a breaker that threw due to an amperage overload on the circuit the jointer was plugged into?
The online manual (available here) takes pains to make sure the receptacle the jointer's plugged into is well grounded and any extension cords are of sufficient guage.
Assuming all that's in order, I guess you could bypass the switch to check to see if it is in fact at fault. Replacement parts are available from the same link above.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Hi,
please use this link , its the full instruction/setup/service manual

http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/Delta/a23308,JT160.pdf

HOW CAN I VIEW THE HIDDEN MESSAGE,

go to Dewaltservicenet.com and type in your model number in the bottom of the page the manual is 56 pages long. If I have helped you would you please rate this response accordingly.

go to this site for parts
http://performancetoolcenter.com/jt160.html

Go to Dewaltservicenet.com and in the middle of the page towards the bottom type in your model number. It will take you to another page and click on the first JT160 and when it changes screens click on the instruction manual, I had to click on it a couple times to open it but I did look at and it is about 48 pages long. Let me know if you have any problems and I will check further

Go to this link and you'll find a complete parts diagram, list, and pdf manuals for your jointer.
Dewalt service net

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!

try  http://www.dewaltservicenet.com/Products/DocumentView.aspx?productid=61056&typeId=13073&documentId=29441