Question about Computers & Internet

1 Answer

My netgear wireless isn't working - Computers & Internet

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 200 Answers

Ok ok its a long story now so please lets follow these steps:

click start
click run
type cmd and click ok
type the following line and press enter with the end of each line:
ipconfig /flushdns
ipconfig /renew
netsh winsock reset
netsh firewall reset
regsvr32 wintrust.dll
regsvr32 softpub.dll
regsvr32 initpki.dll
regsvr32 mssip32.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll

now lets go to start
click control panel
click network connection
RIGHT click on wireless connection icon and select properties.
in the middle there is install button, click it.
select tcpip protcol and click add
in the next window click have disk (its to the right side).
change the path to C:\windows\inf now hit enter.
select tcpip v4 and click install.

now reboot the computer.

hope that will fix it for u

let me know what happened with u

cheers

Posted on Aug 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wifi sybol isn't comin on


Try resetting the Netgear and then configure it again.

To RESET the Netgear, power up the Netgear then press and hold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configure the wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Feb 08, 2013 | NetGear WGR614 Wireless Router

1 Answer

My wireless signal is indicated, it DOES NOT light up, no icon recognition at the bottom right for a signal, BUT the wireless router works for the desktops , 2 with NO problem


Try resetting it to factory default setttings. Use a paperclip to hold the reset button down in the back for 30 seconds. It will come up as "NETGEAR" with no security when it resets. Try to connect to it and see if everything works that way first, then re-set everything up as far as security passwords for the network and all. If it worked as NETGEAR with no security but not after you set up security, something isn't compatible.

Aug 21, 2011 | NetGear WNR2000 Wireless Router

1 Answer

We are currently running Comcast internet and phone through a Netgear Wireless-N 300 Router and an Arris TM502G Modem. Our phone service works fine, but the "Link" light isn't showing up for...


There's a reset button on the back of the modem. It'll power cycle it. That should work and if it doesn't make sure everything is connected and tightened.

Jul 29, 2011 | Arris Touchstone 450a (CM450) Modem

1 Answer

My Netgear WNDR3300 just quit putting out a wireless signal. I just bought a new Compaq notebook and the wireless internet was working for like three days and now nothing. And it is running windows 7 and...


Hi,

It seems that router wireless setting need to reconfigure,please follow steps to resolved issue

1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router, usually by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on Wireless Settings'(under Setup) from the left menu.
5. If WPA is selected in Security mode, then check the Password that show up in the passphrase box.
now try to reconnect wireless

Thanks for using Fixya

May 14, 2010 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Netgear wireless adapter wg111t will not work work


It's impossible that the wireless router cannot detect your wireless adapter wg111t.
0a45630.jpg
You try to test another one if still have a problem connecting with your wireless router.
If that router can see another wireless network available then maybe your Netgear wireless adapter have a problem incomplete installation or the wireless device is defective.
I have encounter like this before so maybe it's the same with.
Hope my tip will help you a lot.
Good luck!
Please rate me.
Thank you.

Sep 14, 2009 | NetGear WG111T 108 Mbps 802.11g Wireless...

3 Answers

When starting internet explorer ''no connection'' problem


can you restart the netgear? also see if you can connect ok with a cable. After all these, reboot your PC and check

Jul 08, 2009 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

Netgear Wireless Router won't work with my Linksys wired router.


As asked above, why would you want the wired router and the wireless router on the same network?

The direct answer to your question(s) is found on Netgear's website. http://kb.netgear.com/app/answers/detail/a_id/965/kw/wpn824/r_id/166

The key is to turn off the Netgear DHCP, and give it an address that is unreachable by the Linksys DHCP ie if the Linksys gives out IP addresses starting at 100 or 101, you set your IP address to 99, turn off the DHCP, and plug it into the network NOT using the WAN port, ever. We tend to start at 251 or 221 just for clarity's sake.

The point is you answered your own question. The Netgear wired and wireless works fine. One piece of equipment and better reporting statistics....what are you missing?

Carl


Apr 25, 2009 | NetGear RangeMax WPN824 Wireless Router...

1 Answer

Netgear router - wireless transmission not working


Try this link, you must turn on wireless to start it.
Have a great day.

Mar 22, 2009 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...