Question about Microsoft Xbox 360 Console

1 Answer

0001 problem Hey did you ever figure out how to fix that 0001 code? I had a 0102 and did the xclamp replace, and had it working but then I tightened up my bolts, obviously too tight, and now I have the 0001:(

Posted by on

  • Anonymous Jan 08, 2009

    I have the same issue... I'm clueless what to do with a 0001!

  • Rod Sims
    Rod Sims May 11, 2010

    Are you referring to the sub fuses , and if so what ones ? also a part location would he helpful I can help in return with finding in our current investigation of the seriviceabilty/ feasibility study.Reguard Xbox 360 Fa/ze/Op/Ze ver. Thank you Rob rsheehan@northernsteeldesigns.com

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

On the bottom of the board on the side of the USB there are little black chips. You knocked one of them off.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IRC4080i printer. How do I correct error code E000007-0001?


Error Codes Relevant to Fixing/Pressure Belt Displacement Control

E007 Fixing belt displacement error

0001: Upper belt displacement fault. (Either the upper belt full displacement or the belt displacement sensor

fault.)

0002: Lower belt displacement fault. (Either the lower belt full displacement or the belt displacement sensor

fault.)

0101: Upper belt HP detection error.

0102: Lower belt HP detection error.

Note:

Adjust the fixing/pressure unit HP with the following service mode at the installation or when replacing the

fixing (pressure) belt.

COPIER > FUNCTION > FIXNG > FX-UHP-S
> FX-LHP-S

Points to Note When Replacing Fixing Unit

By executing the service mode, the alarm code is closed and the total rotation time is cleared. Thus, this mode

must be executed when replacing the fixing unit.

If the mode is not executed, the following symptoms will occur.

-The alarm code is not closed.

06-0002: Fixing unit life alarm (Caused by the belt displacement)

06-0004: Fixing unit life alarm (Caused by the torque up)

-Although the total rotation time of the replaced fixing assemble does not reach to the message threshold, the

machine wrongly recognize that it reaches to the threshold and displays the message.

Be sure not to execute the mode except at the installation and the fixing unit replacement. If not, an error
message may not be displayed when the fixing unit reaches to its life.

Sep 10, 2015 | Canon Office Equipment & Supplies

1 Answer

0102 error after xclamp fix


Hi,


0102 Error in the "Digital Backbone" (CPU/GPU/RAM) is usually caused by a cold solder joint between the GPU and the mainboard.
There are two theories to fixing this. One deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call Microsoft to have it replaced.


Thank you!

Jun 20, 2010 | Microsoft Xbox 360 Console

3 Answers

How do you fix error 0031 on xbox 360


This error is caused by a faulty/cracked RAM brick, however it can also be caused when the heatsink is shorting out a resistor or like a bad solder joint under the GPU. If your xbox still under warranty send it back to Microsoft, if not try the xclamp fix. You could also try to Loosen your screws and make sure the heatsink isnt shorting out a resistor.You could Replace the faulty RAM brick or Cold joint/Shortcircuit under the Southbridge and/or Replace dvd power cord. Short in the dvd drive cord or the cord is in backwards.

Sep 21, 2009 | Microsoft Xbox 360 Console

1 Answer

Error Code 0020


First, my xbox would have one red light and E 74. Then when I opened it up and booted it I got three red lights and 0020. I took out the motherboard, replaced the heatsink compound and did the x-clamp fix, but I couldn't get nylon washers in the right size so i just used no washers at all. Varying the tightness of various x-clamp bolts gave me 0020, 0003, 0002, 0001, or it would boot up to the black screen and I'd get E 74 again. Other times the xbox would almost immediately overheat. Most of the time I would get 0020, though. At that point, I gave up and I just tightened up the bolts replacing the x-clamp a certain way (nothing seemed special about it) and put the motherboard back in the case without testing it. I screwed everything back together, and since the heads of the bolts were thicker than they should have been, the motherboard didn't really sit flat in the metal cage. But i just screwed the motherboard back into the cage not to tight with the 9 small silver screws, which I would imagine put some stress on the mobo. Then I pu the rest of the case on and the 6 long screws, and once I had snapped everything back together I tried booting it up. To my great surprise it booted up fine! I played some halo 3 and it has booted up fine every time (3 times) since then
Many people have got this error You need to replace the xclamp and make sure there's extra pressure (less than half a turn) on the front right corner of the GPU. You can read more about xclamp replacement here.

its not an issue with ur HDD so no worries....
regards iversh
a very helpful rating is appreciated for answering ur query

Sep 17, 2009 | Microsoft Xbox 360 Console

1 Answer

3 rrod


make sure that the clamp fit on die of the processor and GPU and fist you may have an Artic silver thermal Grease i suggest, and then u titen up the srews back on it and heatup until the consoles get 2 code (overheating) and then uplug the adaptor cable and the AV cable coliitup about 20 minutes.....turn it on again and the result is......
*i have tried five times that trick and it work...

Jul 24, 2008 | Microsoft Xbox 360 Console

3 Answers

Error code 0102


If you're comfortable enough opening your 360, you can try this tutorial, which has worked for many people.

Jan 07, 2008 | Microsoft Xbox 360 Console

5 Answers

Error code 0020


a solution?!ok my suggest is throw away the fuckin' 360 'n buy a PS3.every time i fix that ***** another fuckin code appears.i've had 0102,0001,0020.0133!so the solution is fuckin' the fuckin' Bill Gates 'n all the microsoft./

Jan 05, 2008 | Microsoft Xbox 360 Console

4 Answers

Xbox 360 0020 error code


here is a site i found that shows detailed fixes for this error with your 360's - here it is

Jan 05, 2008 | Microsoft Xbox 360 Console

1 Answer

Error code 0102


Error code 0102 is still unknown The xclamp mod is a possible fix for this error there is also a possability that the error is caused by a bad soldering join on your cpu, gpu or your ram. I would check all those parts with a magnifiying glass to make sure that there are no cracks in the solder. Another way to possibly fix this is to turn off your HD format on the AV cables this might work.

Dec 11, 2007 | Microsoft Xbox 360 Console

12 Answers

Xbox360 error code


Here is how you interpret the LEDs to get the code number:
  • All four lights flashing - 0
  • One light flashing - 1
  • Two Lights flashing - 2
  • Three lights flashing - 3

0001 power supply problem
0002 Network Interface problem
0003 Power problem could be the PSU could be the GPU/CPU, somehow the console isn't getting clean power from the power supply.
0010 over heating
0011 over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsync screws are tightened securely to the board/heatsink holes.
0012 over heating
0013 over heating
0020 (Not yet known, possibly overheating)
0021 DVD Drive Time out - Can be caused by problems with a firmware flash. This is also speculated to sometime be caused by a problem with the southbridge chipset on the motherboard.
0022 GPU Error / GPU Overheating
0023 (not yet known)
...
0101 (not yet known)
0102 unknown error

Oct 12, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Jonathon summesfield

Level 2 Expert

285 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...