Question about Insignia IS-LCDTV32 32 in. Television

1 Answer

Remote control volume

We have a 42' insignia tv and cannot get volume control to work on our remote , the insignia remote won't work, and we also tried a universal remote and can't get that to work with the tv. But the universal remote will work with everything else. The universal will work with the insignia communication. I suspect there is something wrong with the sensor in our tv. What can we do about this?

Posted by on

  • Anonymous Oct 23, 2008

    I am having a similar problem only the remote or universal remote will communicate with tv but it goes haywire and won't do what I'm telling it to do. If I push the volume buttons the menu comes up if I push menu something else will come up, etc. It won't let me change any settings or volume. Also the buttons on the side of the TV don't work anymore. The tv is less than a month old but I accidentally threw out my receipt.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 71 Answers

Reset the TV. Unplug it, wait 1minute and replug it. Did it work?

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv volume and input not working


The button itself may not be making contact with the circuit board under it

Feb 14, 2016 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

Insignia lcd won't change channels


on the off chance read the owner manual as the set may have a feature that locks the keyboard and the remote out

Aug 27, 2012 | Insignia NS-LCD42HD-09 42 in. HD-Ready LCD...

1 Answer

My Insignia LCD 42" only


It sounds like it has main board problem, leave it unplug for about an hour to let it reset itself to see if it will work again. It can also be unstable power supply problem.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Jun 14, 2011 | Insignia 42" LCD Flat-Panel HDTV

3 Answers

Why does my 26 insignia do the following without touching the remote: volume up and down, changes channels and menu screen pops up


It could well be your remote control has a problem. Try removing the batteries from the remote control and see if the problem goes away, if it does, try new bateries on the remote controller, if that does not work you may have to get a new remote controller

Mar 24, 2010 | Insignia LCDTV26 26 in. Television

1 Answer

Volume control on Insignia remote doesn't work.. Have to use cable box remote to control volume.


Your remote control may be faulty. If you can control the volume from the cable box and from the buttons on the TV - then I'm pretty convinced the remote control needs replacing.

Jan 01, 2010 | Insignia 26 in. LCD Flat-Panel HDTV

1 Answer

Random volume increase to 100


It sounds like you have a defective Main Control board. I would contact a service co. as soon as possible.

May 02, 2009 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

Cannot turn tv off with power button or remote , must unplugpower


It could be a stuck button on the set. check to make sure they all feel the same.. If one don't feel right try to free it .. If a button is stuck it wont let any of the others work or the remote.

Mar 29, 2009 | Insignia I-LC23Q1 23 in. HD-Ready LCD...

1 Answer

Programm bell expressvu 4100 remote control


I had the same problem. I used the code 660 and that works fine for power, volume, and stations for my Insignia with the bell remote. Hold tv button till all 4 lights light up and then press 660 # and everything (minus the menu option) should work. I also tried these insignia codes (which might work if this dont.) 659, 573, 570, 405, 245, 456.

Mar 09, 2009 | Insignia 19 in. Widescreen Flat-Panel LCD...

2 Answers

Need Insignia TV code for my Sony Receiver Universal Remote Control


Try This link it worked for me.
www.insignia-products.com/universalcontrolcodes.aspx

Jan 06, 2008 | Flat Panel Televisions

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Flat Panel Televisions Experts

Sp Gupta

Level 3 Expert

667 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

The Wyzzyrd

Level 2 Expert

83 Answers

Are you an Insignia Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...