Question about HP Pavilion a1010n (PS563AA) PC Desktop

1 Answer

Wiring on off switch @ lights

Need wiring diagram for on off swiych 6 wires

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

If i understand you correctly, you want to wire the box to the motherboard so that reset, power etc works?

Look closely on the board, there are small hints printed on it. eg... pwr, reset, spkr etc. and on the colored wires, there ought to be printed reset, power etc. just match them and plug them in. you can't do too much damage if they are wrong.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need emachines t3306 motherboard connection diagram


The eMachines T3306 desktop computer, uses the FIC K8M-800M motherboard.
First International Computer, (Inc)

http://www.fic.com.tw/product/motherboard/amd/ficimages/k8m-800m.jpg

http://www.fic.com.tw/product/motherboard/amd/k8m-800m.aspx

Here's the download page for the motherboard manual,

http://www.elhvb.com/mboards/OEM/eMachines/manuals/index.html

Column in middle, 3rd file from bottom.

This is a Zip file. A Zip file is a Compressed file. Used to send large amount of information more easily.
Has to be decompressed, or 'unzipped'.

After you click on the blue -> FIC K8M-800M file name, a small window will come up-
Opening K8M-800M_manual.zip

Make SURE there is a Green dot in the small circle, to the left of Save File.
IF not; click in the empty circle to the left of Save File.
No go below in the small window, and click on OK.

A small download window will come up.
Allow the file to fully download all the way, then DOUBLE-click right on the file name.
(Yellow folder icon with a zipper on it. K8M-800M_manual.zip is to the right)

In the next small window go to the far Left, and click on -
Extract all files.
At the bottom of the next 3 small windows click on Next, Next, and Finish.

In the last small window DOUBLE-click right on the file name ->
K8M-800M_manual
(Next to the red Adobe PDF icon)

There is your motherboard manual in PDF file form.

For an example;
The front of your computer is the Front Panel.

The area of contact pins on the motherboard, that the Main wires from the Front Panel go to; is the Front Panel header.

Motherboard installed in computer case, the Front Panel header is at the Bottom/Right.
The Front Panel header is Orange in color. (Page 20)

Two rows of contact pins.
5 pins across the Top row.
4 pins across the Bottom row.

The Top row is numbered ODD.
The Bottom row is numbered EVEN.

Starting on the RIGHT side going across to the Left; Top row,
Pins 1, 3, 5, 7, and 9.

Starting on the RIGHT side going across to the Left; Bottom row,
Pins 2, 4, 6, and 8.

A) Pins 1 and 3 are for the HarDDrive activity LED light.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the Harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected.
Reserved for factory use. Probably a 5 Volt test point.

D) Pins 2 and 4 are for a Power On LED light.
These two pins are used for a Single color, Power On LED light.
Two wire LED light.

Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.
There is ALSO a jumper used for this LED light. More on it at the end.

E) Pins 6 and 8 are for a Power On switch.

To the Right of the Orange Front Panel header, (F_PNL), is the PW_LED header.
[Page 20 to right of Front Panel header. -> PW_LED
(Power LED, 2/3 Pins) ]

3-pin Black header. Sits Vertically.
(The Orange - Front Panel header, sits Horizontally)

This is used for a 3-wire Power On LED light.
Used for a Dual Color - Power On LED light.

One example is if the computer has Turbo Mode, and Normal Mode.
Green color usually for the Turbo Mode, Yellow color of the LED for the Normal Mode.

Starting from the BOTTOM going UP;
Pins 1, 2, and 3. (3 at the Top)

A) Pin 1 is for the Positive ( + ) wire. [Signal]
B) Pins 2 and 3 are for the Ground wires.

Jumper block for the 2-wire Power On LED light, and 3-wire Power On LED light; Page 13 - Set System Jumpers
(Actually it starts on Page 12)

6-pin header to right, of 3-wire Power On LED header.
Has Blue jumper caps on it. Two of them.
(PL_LED1)

http://www.ebay.com/itm/NEW-FIC-uATX-Skt-754-AMD-Desktop-Motherboard-VIA-K8M800-AGP-4x-8x-DDR400-800FSB-/280923928691?pt=Motherboards&hash=item41685ef873

Two rows of 3 pins.
The Top row is numbered ODD.
The bottom row is numbered EVEN.

Starting on the RIGHT side going towards the Left; Top row,
Pins 1, 3, and 5.

Starting on the RIGHT side going towards the Left; Bottom row,
Pins 2, 4, and 6.

A) With the jumper caps on Pins 3 and 5; plus 4 and 6; the Power On LED light works as a Single color LED.

B) With the jumper caps on Pins 1 and 3; plus 2 and 4; the Power On LED light works as a Dual color LED.

For additional questions please post in a Comment

Regards,
joecoolvette

Mar 07, 2013 | PC Desktops

1 Answer

Need circuit diagram for HP m8100 GC673AA


HP Support > Pavilion Media Center M8100n Desktop PC > Main Support page,

http://h10025.www1.hp.com/ewfrf/wc/product?product=3440614&lc=en&cc=us&dlc=en&lang=en&cc=us

Product information > Product specifications > Motherboard Specifications, MCP61PM-HM (Nettle2 {HP name} ),

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01077676&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3440614

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the Main wires connect to, is the Front Panel header.
(Power On switch, Power On LED, HarDDrive activity LED, etc)

The Front Panel header is Black, rectangular in shape, and is situated in a vertical position; located in the Bottom Right corner of the motherboard. (Next to the mounting hole)

It is a standard 9-pin HP Front Panel header,

http://h30434.www3.hp.com/t5/Desktop-Hardware/Getting-a-new-case-i-need-Front-Panel-pinout/td-p/842897

Scroll down to the 9-pin Front Panel header photo, and pinout.

The 4-pin side is the EVEN side. Pins 2, 4, 6, and 8. There is NO Pin 10.
The 5-pin side is the ODD side. Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light Emitting Diode, so it is redundant to call it a light)

Pin 1 is for the Positive ( + ) wire.
IF the HDD LED is dim when the harddrive is active, (IN use), switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. Reserved for factory use, and it is +5 Volts.

D) Pins 2 and 4 are for the Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

Scroll the HP Support Motherboard Specification page down. Click on the + sign next to Motherboard Layout.

Left to Right on bottom edge of motherboard, Internal Connectors;

AUDIO_1 is for the audio ports on the Front Panel.
ATX_IN is where the small audio cable from the optical drive plugs in.
(CD/DVD drive)
IF TWO optical drives are used; the Main, or Primary optical drive, is connected with the small audio cable. NOT the secondary optical drive.

HD_AUDIO also connects to audio ports in the Front Panel.
May be mistaken, but don't believe SPDIF_OUT header is used.
1394A1 header is for the Firewire ports in the Front Panel (1394a)
USB 2 and USB 4 headers are for the Front Panel USB ports.
USB 1 and USB 3 should be for a Card Reader.

Need where the power cables go, and what they look like? Just post back in a Comment.

(Be SURE to FOLLOW Anti-Static Precautions)

Regards,
joecoolvette

[ Didn't think you actually wanted an actual circuit diagram. That is copyrighted by HP, and Elitegroup Computer Systems. (ECS)

Dec 03, 2012 | PC Desktops

1 Answer

Motherboard diagram Acer eMachine MB DA061/078L


Hello? Tap, tap on the monitor. What are you reading from?

http://www.ebay.com/itm/Acer-MB-NB107-001-DA061-078L-Motherboard-eMachines-08120-2-780G-AM2-Desktop-/280919767281?pt=Motherboards&hash=item41681f78f1

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires go to from the Front panel, is the Front panel header.

Motherboard installed in computer, the Front panel header is at the Bottom/Right.
Two rows of 7 pins in a small black rectangular plastic block.

http://www.ebay.com/itm/Acer-DA061-078L-Motherboard-eMachines-EL1200-X1200-AMD-780G-Socket-AM2-DDR2-/140825131784?pt=Motherboards&hash=item20c9d4fb08

TOP row of pins is numbered EVEN.
BOTTOM row of pins is numbered ODD.

Starting on the LEFT side going towards the Right, TOP row:
Pins 2, 4, 6, 8, (NO 10), 12, and 14. Again, there is NO Pin 10.

Starting on the LEFT side going towards the Right, BOTTOM row;
Pins 1, 3, 5, 7, 9, 11, and 13.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

2) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

3) Pins 2 and 4 are for the Power On LED (Light)
Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

4) Pins 6 and 8 are for the Power On switch.

5) The rest of the pins are N/C. Not Connected.

Don't forget to plug the 4-pin ATX +12 Volt power cable in,
(Top left corner),

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

For additional questions please post in a Comment.

Regards,
joecoolvette

Sep 06, 2012 | PC Desktops

1 Answer

Need wiring connection diagram for Power Switch to Motherboard for EMachine W2925 model. Wires were disconected accidentally while cleaning inside of tower


micha219, the eMachines W2925 desktop computer uses an FIC motherboard.
First International Computer { Inc }
The Model Number of the FIC motherboard is VC37.
FIC VC37.

Disregard the following if you are aware:
The plastic front of your computer is the Front Panel.
The area on the Motherboard that the cables (Wires) from the Front Panel connect to, is the Front Panel header.

Processor to the Top, Ram Memory slots to the Right, the Front panel header is in the Bottom Right corner.

It is a rectangular shape with two columns of pins.
The length goes up, and down on the motherboard.

The pins on the Right side of the Front Panel header are numbered Odd.
The pins on the Left side of the Front Panel header are numbered Even.

There are 4 pins on the Left side.
There are 5 pins on the Right side.

Starting at the Bottom on the Right side going Up;
Pins 1, 3, 5, 7, and 9.

Starting at the Bottom on the Left side going Up;
Pins 2, 4, 6, and 8.

A) Pins 2 and 4 are for the Power On LED light.
(If after connecting the LED light is dim, reverse the wires)

B) Pins 6 and 8 are for the Power On switch. (Power On button)

C) Pins 1 and 3 are for the HarDDrive Activity LED light.

D) Pins 5 and 7 are for the Reset switch. (Reset button. IF used)

Pin 9 is NC. Not connected

Oct 18, 2010 | E-Machines eMachines Desktop PC

1 Answer

I need the wiring diagram for power,reset,lights


there is no need for the wiring diagram
if you check *********** board properly
you could find written in small font like
PWR SW for power switch
RST SW for rese switch
HDD LED , PWR LED etc

May 05, 2010 | Wintergreen Lindows Webstation (M810L11L)...

2 Answers

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


Here is a link for the manual for your au31 motherboard. The diagram explaining the front panel headers is on page 12.

http://www.lurkhere.com/~nicefiles/AU31_manual.pdf

Dec 02, 2009 | E-Machines T3092 PC Desktop

1 Answer

Need wire schematics for cnx-183 board


No you need a flashlight magnifing glass / open up the case and on the mother board usually on the bottom right side close to wires to the on switch will be one or mor groups of 6-8 pins with USB clearly marked under them. match them up with the plug as there is a blank if you look close.

on some mother boards there may be a connection in the middle left of the board.. bottom right is the most used.

Oct 30, 2009 | PC Desktops

1 Answer

Wiring diagram for ignition switch farmall 140 tractor


FOUND YOU A WEB SITE FOR WIRING DIAGRAM
CARTER & GRUENEWALD CO. INC.
IF THAT DOSN'T WORK LOOK UNDER FARMALL 140 WIRING DIAGRAMS AND THE SITE WILL BE LISTED THIS SITE WON'T LET ME COPY AND PASTE TO YOU

Sep 16, 2009 | PC Desktops

1 Answer

Emachine t1840 wiring diagram power switch wire to mother board ?


Because there are so many different case and motherboard combinations sometimes it can be difficult following the instructions for connecting the front panel, USB header and audio header.

Below is a few generic guide that should stop some of the confusion with the labels on the wires.

frontpanelsetup.jpg

usbheadersetup.jpg

Front Panel Audio
audiosetup.jpg

***Please note this is a generic wiring guide and we can not guarantee it will work with every motherboard. Please check your motherboard manual first. Wiring the headers wrong can cause damage to the motherboard and case, this damage is not covered by the warranty***

another handy USB wiring guide can be found here http://www.directron.com/installusb.html

this maybe easier to follow

FRONT PANEL AUDIO

2________10
__

1________9

Pin Wire
1) Mic In
2) GND (ground) or if 2xGND available, it’s the GND for the headphones, NOT the Mic
3) Mic BIAS
4) n/c
5) Speaker Right Out
6) Speaker Right Return
7) n/c
8) no pin (n/c)
9) Speaker Left Out
10) Speaker Left Return

n/c = not connected



USB (F_USB1 and also F_USB2)

2________10

 x
1________9

Top row of pins
2 = USB port 2 : VCC/Power/+5V
4 = USB port 2 : Data -/D-
6 = USB port 2 : Data +/D+
8 = USB port 2 : Ground/GND
10 = USB port 2 : pin present, but not connected to anything.

Bottom row of pins
1 = USB port 1 : VCC/Power/+5V
3 = USB port 1 : Data -/D-
5 = USB port 1 : Data +/D+
7 = USB port 1 : Ground/GND
9 = USB port 1 : no pin present

Front Panel Connector (FP1)

1 2
x 




9 10

1 = no pin present
3 & 5 = Power Switch
7 & 9 = Power LED (light)

2 = pin present, but not connected to anything.
4 & 6 = Reset Switch
8 = 10 = Hard Drive LED (light)

Jul 30, 2009 | PC Desktops

1 Answer

Installed an Upgrated Mother Brd,in my Hp Desktop Tower,but the power Switch receptacle in the New Mother Brd has 16 pns


You need to track the wires from the case front panel to thier locations: one will be your power switch, one your reset, one hard drive activity light, and one your power light. You want to note and label which light or switch they go to then go to the new motherboards manual and plan which wires need to go where.
the front panel switches : reset and power switch- these are momentary switches so it doesnt matter which way they go.
hard drive activity and power light- these should have a colored wire and a black or white. the colored wire will be your + side.

Nov 08, 2008 | PC Desktops

Not finding what you are looking for?
HP Pavilion a1010n (PS563AA) PC Desktop Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Desktops Experts

Fred Sops

Level 2 Expert

271 Answers

john smith

Level 2 Expert

366 Answers

Gavindu Dileepa

Level 1 Expert

10 Answers

Are you a HP PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...