Question about EuroTech EWC177 Front Load Washer / Dryer

2 Answers

EuroTech EWC177 washer/dryer combo reset

Well this is a solution.....
my roommate unplugged the machine while it was drying. the start and spin lights were both flashing. I called the company and they told me to reset it, but the weren't sure how, lol.
I unplugged it and waiting, nothing. I flipped the braker, nothing. I finally turned it to a setting, and turned on nob on the dry, and it started clicking.
I turned off the dry, and hit the start button, and it started right up...

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

TinaheinleHello
Welcome to fixya.
I'm Huuum and happy to assist you,

You said, ..well this is a solution.....
my roommate unplugged the machine while it was drying. the start and spin lights were both flashing. I called the company and they told me to reset it, but the weren't sure how, lol.
I unplugged it and waiting, nothing. I flipped the breaker, nothing. I finally turned it to a setting, and turned on nob on the dry, and it started clicking.
I turned off the dry, and hit the start button, and it started right up...


If the next time you use it and it's fine then you did succeed in resetting the system and will be alright!
Let me know that we were successful!

Please remember to leave a rating before you go!
Thank you


Posted on Sep 29, 2008

Reset the unit by turning the unit off. Then turn it on again. Set the wash cycle to "spin" and the time dial to 90 minutes. You will hear a loud click, and then the front panel will flash a few times, and the water pump will drain excess water. When it stops flashing return all the knobs to their off positions and turn off the unit. It should now be reset.

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eurotech washerdryer door won't unlatch


Let it be there. This device will behave so. It will be alright after 4 days.

Aug 11, 2012 | EuroTech EWC177 Front Load Washer / Dryer

1 Answer

Tripped my circuit and wont reset or start HELP!!!


Your circuit braker tripped because of a current problem that in your case caused a defective part. Since your machine is still under warranty, best way will be to contact to the appropriate factory service center for repair the problem. Good luck!

Aug 22, 2007 | EuroTech EWC177 Front Load Washer / Dryer

1 Answer

My machine does not dry properly, very little heat is being delivered to the clothes consequently I am having to hang them to dry. Inez W.


Hi from retired Englishman in SW France,
I would suspect that the dryer's heater element is malfunctioning. This would require an engineer visit I fear ;-0(
Sorry,
Good luck, John C

Mar 25, 2011 | EuroTech EWC177 Front Load Washer / Dryer

1 Answer

Power is on, lights are on, put it to a setting and hit start and nothing happens no water(water is on) no spinning and no drying. Have checked all the hoses and cleaned the filter.


I sometimes get this happeing if the door doesn't close and seal. If you can open the door then this is the issue. THe door should seal and won't open when you hit start. Try opening and closing the door tightly

Feb 28, 2010 | EuroTech EWC177 Front Load Washer / Dryer

1 Answer

Eurotech Washer\Dryer EWC177 does not dry


Unplug the power. At the back are several circuit breakers. make sure they all have continuity. They only open in the event of overload, thermal or electrical. After that they are suppose to clickback to normal. If all of them tested ok, check the continuity of the heating element. You may see a break in the nichrome wire coil, thats the heating element.

Jun 29, 2009 | EuroTech EWC177 Front Load Washer / Dryer

3 Answers

Euro tech front load washing machine


Hello
Welcome to fixya.
I'm Huuum and happy to assist you,

You said, after load finished door did not automatically open.

How old is the washer?
Treat it like an error code.
This can reset the system.
Turn the breaker off to cut the power for 5 minutes.
Then restart the breaker and try the range.
It's like rebooting your computer when its acting strange!
Usually it corrects some error problems if they are not serious.
Or they are sometimes just a glitch.

If this does not remedy the problem, then the switch itself is bad.
Let me know how it works out.



Please remember to leave a rating before you go!
Thank you

Sep 29, 2008 | EuroTech EWC177 Front Load Washer / Dryer

1 Answer

EuroTech M90L


Try Eurotech, Italy or Turkey. They are the manufacturers and are generally helpful. Have your model and serial numbers ready.

Jul 03, 2008 | EuroTech EWC177 Front Load Washer / Dryer

1 Answer

Urotech EWC177 Combo


Same problem here and mines brand new. Seems the dryer consists of only a heating element. There's no circulation of dry air. You may as well hang your clothes inside a steam room.

Mar 10, 2008 | EuroTech EWC177 Front Load Washer / Dryer

Not finding what you are looking for?
EuroTech EWC177 Front Load Washer / Dryer Logo

1,278 people viewed this question

Ask a Question

Usually answered in minutes!

Top EuroTech Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you an EuroTech Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...