Question about Sony KP-57WS500 57" Rear Projection Television

2 Answers

Six (6) blinks on the Timer/Standby led

My Sony Projection TV KP-57WS500 does have no picture and sound. It just bliks when power on. It blinks 6 times and stop repeatedly. Any suggestion? Surge protection circuit problem? Any help will be greatly appreciated.

Woogon

Posted by on

  • retroflexus Sep 03, 2008

    Same problem and the same model. I have followed the link provided but have not been able to find the specific part number that I need to order . . . Any idea what part # ?

    Thanks!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Sony Projection TV KP-57WS500 does have no picture and sound. It just bliks when power on. It blinks 6 times and stop repeatedly. Any suggestion? Surge protection circuit problem? Any help will be greatly appreciated. any pacific part to order. thanks kay

Posted on Oct 16, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 19,396 Answers

6 blinks means lamp thermal fuse blowing, replace thermal fuse.

See here

Posted on Aug 30, 2008

  • Jason Pigg
    Jason Pigg Dec 07, 2011

    I need a service manual for my sony kp57ws500 for the thermal fuse please any help.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony KP-57WS500 57 in. Rear Projection tv When I press the power button there is no picture but the "timer / Standby" light flashes. Sometimes when pressing the power buttonthe light flashes and I hear...


CK your hori output Transitor and behind it is a blue high voltage capacitor 2k sometimes they will have small burt hole on them ,If it is OK then Replace your STK ICs example STK392-110 Mats has them 1-800-628-1118

Feb 15, 2010 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Sony KP-57WS500 Rear Projection TV Problem


hello if you could tell me how many times it blinks i'll try and tell you the fault thanks

shaun

Oct 25, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Sony rear projection screen is red then tv shuts off


Can be 1 of 2 things. 1st the red tube just needs the voltage to it turned down. In the front of TV (you have to remove the lower front half of TV to access it) is a plastic square with 6 knobs. The from left to right top knobs control focus for blue,green red. The bottom knobs control voltage to each tube in same order (so lower right knob for red) turn SLOWLY to left to reduce voltage until excessive red and lines go away. If you over turn left or right set will turn off. If that does not fix it or if lines reappear then option 2 is that red picture tube is failing outright and needs replacement.

Jan 29, 2009 | Sony KP-57WS500 57" Rear Projection...

5 Answers

Sony KP-53V80 is not turning on.


4 LED flashes indicated a faulty IC board

Jan 18, 2009 | Sony KP-53V80 53" Rear Projection...

1 Answer

Sony KP-57WS500 57 in. Rear Projection Television


THE LED ON THE FRONT OF THE SET SHOULD BE BLINKING IN A SERIES OF BLINKS THEN PAUSE AND REPEAT THE SEQUENCE. IN ANY CASE IT NEEDS TO BE SERVICED BY A SONY AUTHORIZED SERVICER.

Dec 27, 2008 | Sony KP-57WS500 57" Rear Projection...

1 Answer

6 bliks on sony kp-46wt510


KP46WT510 Shutdown 6 Blinks. 6 Blinks = Low B+ OCP/OVP
SOLUTION: Replaced Flyback transformer. It had no rings on the ringer test.
HQ
Comments: Any load on the B+ line can cause 6 Blinks.
Example: If the 200v line is loaded down will cause a drop in B+ due to bright picture current demand.

Click Here! to download the Sony Kp-46wt510 full service manual.

Nov 11, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Sony KP-51HW40 6 blinks


Hi Yeooow,
I guess you read the fix for my set wth the six-blink error. If not, here's the link:
http://www.fixya.com/support/t647530-tv_couldnt_turn_no_picture
My set is a KP-53HS30, chassis number P65A-A.
I found a bulged capacitor on the "G" power supply board and replaced the components associated with that circuit (6-volt regulator). If your set has the P65A chassis, I'd be happy to e-mail you the service manual I have, if it will help.
-Dan


Sep 04, 2008 | Sony KP-51HW40 51" Rear Projection...

3 Answers

Timer Standby light flashing No pitcher


Sony
Model # KP-53HS10
Serial # 9718217
MFG 2000

Plugged in TV. Timer Standby Light just flashes continusly. No Picture and No Sound.

Apr 02, 2008 | Sony KP-51WS500 51" Rear Projection...

2 Answers

Sony KP-57HW40 Error Codes 6 & 8


ITS PROBABLY THE RED PICTURE TUB (CRT). IT LOOKS EASY TO INSTALL, BUT YOU NEED TO MAKE ADJUSTMENTS TO THE SCREEN ONCE IT IS INSTALLED. THE PART IS $3OO. TRY TO FIND SOMEONE TO INSTALL IT FOR $150 OR LESS. HERE IS A WEBSITE TO HELP YOU MAKE ADJUSTMENT IN THE FUTURE ON YOU OWN.

PRIDAH


http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html

Nov 10, 2007 | Sony KP-57WS500 57" Rear Projection...

Not finding what you are looking for?
Sony KP-57WS500 57" Rear Projection Television Logo

Related Topics:

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...