I continue to receive the error message: Cannot connect. Call in progress.

Replace ink!

Support Code = 1688 The ink has run out. Replace the ink cartridge and close the paper output cover. If printing is in progress and you want to continue printing, press the machine's Stop button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.Dec. 26, 2012

A Support Code and A Message Are Displayed

According to the User's Manual for the Brother MFC-490CW:

• Poor Line Connection indicates an issue with your telephone line (Page 136). If you are sharing the fax line with any splitters or computers, try connecting the MFC-490CW directly to the phone jack and send a fax. If you are still getting a Poor Line Connection error message, call the telephone company and have a repair technician check your telephone line.
  
  
• Out of Memory error message means the machine's memory is full (Page 138).
  
  Try pressing Stop/Exit and wait until all current operations finish and try again.
  
  Try clearing the data in memory. To gain extra memory space. turn off Memory Receive (See Page 48).
  
  Try printing the faxes that are in memory (See Page 49).
  
  
• System Busy error message wasn't in the manual, but I suspect it means there's a current operation in progress and the machine needs time to finish before moving on to another job. Just wait for the current job to finish, then try again.

ok try disabling the printer the enable it. almost like rebooting the printers drivers... if that dont resolve the issue then try reinstalling the printer incase that some of its drivers has bcome corrupted or uninstalled.

You need to set DVP-NS67P on Progressive Scan mode to get video signal from Component Video Out pins.
Thanks.

Here is the newest verison of the the Nintendo wifi usb stick driver:
http://www.nintendo.com/consumer/systems/wii/en_na/onlineUSBDownload.jsp

And here is the manual that describes how to install the driver:
http://www.nintendo.com/consumer/systems/wii/en_na/connectingOnline.jsp?entryId=usbInstall

Not your only able to install unsigned drivers on Windows XP and Vista 32Bit versions.
64Bit versions of Windows XP and Vista won't accept unsigned drivers at all.
On windows vista and xp chose to continue to install te unsigned driver when windows prompts for it.

Succes.

where are you getting that error message, on the pc or the 3100

sagem freeview recorder displays error 07

Your PC has a Sigmatel sound card (or a sound chipset designed by Sigmatel). You will want to choose the Logitech mic for the tuning wizard. What exact error are you getting? Please be more specific with OS being used, applications, etc.

Whenever a mail server is unable to process an e-mail request, the e-mail fails and the software displays one of the following error messages: Can't connect to email server Progress bar stuck at 0% To resolve this problem go to http://www.kodak.com/go/itg

when I send a picture, the envelope shows sending but it never goes thru to the recipient.